Aquagem's iSAVER X 1100 Plug & Play inverter optimizes your pool pump for ultra-quiet operation and reduces your electricity bill by up to 80%. Description détaillée
- 100% Plug & Play Easy Installation
- Up to 80% energy savings
- Intuitive touchscreen and PFC technology
Livraison offerte dès 150€
Paiement sécurisé
-
French company
-
Eco-friendly products
-
We'll support you
-
Easy to use
Reduce your electricity consumption by up to 80% and make your pool silent.
The iSAVER X 1100 from manufacturer Aquagem is an intelligent device designed to optimize the operation of your existing filtration pump. By adjusting the motor speed according to your actual needs, it transforms a classic installation into a high-performance, economical, and ecological system.
Thanks to its 100% Plug & Play technology, it requires no plumbing modifications or electrical skills to install.
Powered by Aquagem's advanced Frequency Inverter technology, the iSAVER X intelligently modulates your pump's power to ensure ultra-quiet operation and maximum energy efficiency.
How does the frequency inverter work?
To understand how the iSAVER X 1100's variable speed drive works, you need to look at your motor's power supply. Normally, a standard pool pump receives a fixed electrical frequency, which forces it to run constantly at its maximum speed, regardless of the actual filtration need.
This intelligent box acts as a precise regulator. It transforms the incoming electrical signal to modulate the frequency sent to the motor. Specifically, the device takes the alternating current from your home network and adjusts it to control the pump's rotation speed. By reducing this frequency (for example, for night filtration or simple maintenance), the motor runs slower, works less hard, and consumes drastically less energy than in direct operation.
How to install the frequency inverter?
One of the major advantages of the iSAVERX 1100 lies in its easy and quick installation, accessible to everyone. Specifically designed for immediate setup by an individual, this drive requires no costly intervention from an electrician or complex modifications to your existing plumbing.
Commissioning is carried out in three elementary steps:
- Disconnect your filtration pump's standard electrical plug.
- Insert the iSAVER inverter directly into your wall socket.
- Connect your pump's power plug directly to the inverter's housing.
The system is then immediately operational. You then simply set your time slots and speeds via the intuitive touchscreen, using the provided user guide for optimal and personalized control.
Why choose the Isaver X inverter?
Adding this device to your installation offers multiple immediate and long-term benefits:
- Massive energy savings: by lowering the rotation speed when maximum power is not required, you avoid the waste of filtration constantly running at 100%. This intelligent management allows you to save up to 80% on your electricity consumption at low speed. Given the current cost of electricity, the device pays for itself very quickly: return on investment is generally seen in just 1 to 2 swimming seasons.
- Silent operation: a pump running at reduced speed generates considerably less noise and vibration than a full-power motor. The iSAVERX can lower the sound level of your installation by up to 25%, making filtration much more discreet. This is an undeniable asset for respecting neighbors and enjoying peaceful swimming or night filtration without noise pollution.
- Better filtration quality: by reducing the flow rate, water passes through the filter media (sand, glass, or cartridge) more gently. This optimized passage speed significantly improves the capture of the finest particles and impurities, providing crystal-clear water. In addition, since the filter clogs less quickly, you space out backwashes, thus saving water and maintenance products.
- Extended equipment lifespan: progressive start-up and speed reduction limit mechanical wear on the motor and seals.
- PFC technology: the Power Factor Correction (PFC) module ensures increased stability and compensates for fluctuations in the electrical grid.
Which pumps are compatible with Isaver X 1100?
The iSAVER X 1100 inverter offers universal compatibility with the vast majority of single-phase filtration pumps installed in residential pools. It is specifically designed to control single-speed pumps equipped with single-phase motors. Whether your equipment is new or old, this device easily adapts to most brands on the market. Please note, however, that it is not suitable for pumps powered by three-phase current or those already featuring integrated variable speed technology.
What is the maximum supported power?
This model is specifically sized to manage filtration pumps with a power of up to 1.1 kW, which corresponds to 1.5 HP. This performance range covers the vast majority of standard private pools on the market. For a compliant installation, it is essential to first consult the nameplate attached to your motor body. Ensure that the indicated nominal power does not exceed this 1.1 kW limit to guarantee the reliability and longevity of your inverter.
By choosing the Aquagem iSAVER X 1100 frequency inverter, you are opting for the most effective solution to reduce your pool's electricity bill. This Plug & Play box instantly transforms your standard filtration pump into an ultra-quiet variable speed pump. No longer suffer the cost and noise of traditional filtration: switch to intelligent management and achieve lasting energy savings today.
How to install the iSaver X 1100?
For electrical connection: The iSAVER X 1100 is equipped with a male plug (like those found on any electrical equipment), which allows it to be simply plugged into a wall socket. It is of course possible, if you wish, to adapt this connection for a fixed installation.
For connection to the filtration pump: The unit is equipped with a female socket, allowing it to be connected to any filtration pump with a male plug in a few seconds. If your filtration pump is not equipped with a male plug, simply install one or make the connection via a junction box.
| Model | iSAVER X 1100 |
|---|---|
| Product type | Plug & Play Variable Frequency Drive |
| Max pump power | Up to 1.1 kW (1.5 HP) |
| Current type | Single-phase |
| Screen | Touchscreen |
| Programming | 4 time slots / 35 speeds |
| Energy savings | Up to 80% at low speed |
| Noise reduction | Up to 25% |
| Included technology | PFC module (Power Factor Correction) |
Shipping within 1 business day
Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.
All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.
Shipping costs
For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.
For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.
Returns
You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr
Frequently Asked Questions about the iSAVER X 1100 Inverter
Is the inverter compatible with my pump brand?
The iSAVER X 1100 is compatible with all standard pool pump brands (Hayward, Pentair, AstralPool, etc.), provided that the motor is single-phase (standard domestic plug) and its power does not exceed 1.1 kW (1.5 HP). It does not work with three-phase pumps or pumps that already have integrated variable speed.
Do I need an electrician for installation?
No, that's the whole point of this model. Thanks to its "Plug & Play" design, installation does not require any complex electrical connections. It simply plugs in between the wall socket and your pump's plug, like a smart extension cord.
What is the difference from the iSAVER+?
The iSAVER X 1100 is the new generation version: it features the integration of an exclusive PFC module that offers better electrical stability and superior energy performance compared to the classic model.
Will water quality decrease if I reduce the speed?
On the contrary. Slower filtration is physically more efficient. Water flows through the filter media (sand, glass, or cartridge) with less pressure, allowing it to capture much finer particles that would have passed through at high speed. Your water will be clearer.
What happens in case of a power outage?
The iSAVER X 1100 is equipped with a memory function. In the event of a power failure, it retains your settings and programs. When power returns, the inverter automatically restarts according to the scheduled cycle.
Can the unit be installed outdoors?
The casing is not waterproof against immersion or strong direct jets. It must be installed in your technical room, sheltered from direct rain and water splashes, while being sufficiently ventilated to prevent overheating.
What is the real return on investment?
This depends on your electricity tariff and the operating time of your pool. However, by reducing the speed by half, electricity consumption is reduced by approximately 8 times. For a standard pool used 6 months a year, the equipment usually pays for itself within 12 to 24 months.
Does the inverter damage the pump motor?
No, it protects it. By running slower, the motor heats up less and the bearings wear out less quickly. In addition, the inverter ensures progressive starting and stopping, which eliminates water hammer in the piping and electrical current spikes at startup.
Where can I buy the iSAVER X 1100 inverter?
We recommend ordering your inverter directly from the Poolplanet website on this page. We ensure fast and secure shipping of your equipment. By purchasing from a specialist, you benefit from our technical expertise, the official warranty, and free delivery to receive your equipment at no additional cost.
What is the price of the iSAVER X 1100 inverter?
The current price is displayed at the top of the product page. It is important to consider this purchase as a profitable investment rather than an expense: thanks to the electricity savings generated (up to 80%), the cost of the device is fully amortized in just 1 to 2 seasons depending on your usage.
