Pool Filter Pump 29 m³/h - 2 HP (Single-Phase) | Pentair Ultraflow

Maximum performance with this 2 HP model, designed for very large water volumes (90 to 120 m³) and demanding installations. It is the essential choice for maintaining crystal-clear water in large pools requiring rapid water renewal and a sustained filtration flow rate of 29 m³/h.

Key advantages of the Pentair Ultra-Flow 2 HP Single-Phase pump:

• A unique "Cam & Ramp" locking lid, easy to use with a simple 1/4 turn
• An extra-large pre-filter basket for easy maintenance and extended cleaning intervals, improving user experience
• A thick-walled pump body for quiet operation
• Suitable for pool salt treatment
• Entirely manufactured in Europe, in Pisa, Italy

The Ultra-Flow Plus, a high-performance Pentair Water pump:

• Ensures optimal efficiency and reduces and facilitates maintenance
• A special corrosion-resistant stainless steel motor shaft
• A single-phase motor with thermal protection
• A stainless steel mounting flange facilitating pump disassembly
• 2" ports for quick priming and better flow
• Three-year limited warranty, except for wear parts (mechanical seal 1 year)

Comparative table of technical characteristics for all Pentair Ultraflow Plus Single-Phase pump models:

To choose your pool pump, you need to know the required m³/h for your pool.

Dimensions of the UltraFlow Plus 2 HP: 

What are the advantages of the Ultraflow Plus 2 HP Single-Phase pump?

1. Exceptional hydraulic performance

• High performance: A powerful flow rate of 29 m³/h for optimal operation.
• Rapid self-priming: Reduces the time needed to start the system.
• Stainless steel motor shaft: Corrosion-resistant for increased durability.
• Very good energy efficiency: Allows for low consumption and thus energy savings

2. Easier maintenance

• Cam & Ramp cover: Easily removes with a quarter turn for quick access to the basket. Easy to use.
• XL pre-filter basket: Reduces cleaning intervals thanks to its large capacity.
• Stainless steel flange: Facilitates disassembly for maintenance operations.

3. Quiet and robust

• Thick-walled pump body: Anti-vibration design for quiet operation.
• Resistant and durable materials: Designed to resist chemicals, corrosion, and UV.

4. Compatible with salt treatment

• Perfect for saltwater pools using up to 4 g/L of salt.

5. Its value for money

In this range and with these performances, its competitive price.

How to install the Pentair Ultra-Flow 29m³/h pump?

Warning: This model delivers 23 m³/h. Ensure your sand filter has a diameter of at least 650mm to accept this water flow without experiencing overpressure.

• Install the Ultraflow as close to the pool as possible.
• Use a direct and short suction pipe with a constant slope to avoid long priming times.
• The pump must be fixed on a flat and solid base, high enough to avoid submerging the motor.
• Install the filter and pump in a protected area, ensuring adequate ventilation and access for maintenance.
• Do not install adjustment devices directly above the pump. • Ensure sufficient floor drainage to prevent the pump from being exposed to water.
• Prepare all pipes to the correct dimensions and reduce the number of elbows as much as possible.
• Provide independent support for the pipe near the pump's suction and discharge to reduce stress on the pump.
• Avoid overtightening pipe connections.
• Only use sealing materials for plastic pipes.
• Avoid petroleum-based products. It is essential that the suction pipe has no air intake. Its diameter must always be at least equal to that of the pump's suction port.
• To prevent hydraulic circulation in the wrong direction and loosening of the impeller, installing a non-return valve after the pump is highly recommended.

We also recommend that a valve, elbow, or tee installed on the suction line not be placed at a distance from the front of the pump less than five (5) times the diameter of the suction line. Independently support the pipe near the suction and discharge of the Pentair pump to reduce stress on the pump. Use plastic pipe sealants.

The suction line should be the same size as the Ultraflow pump's suction inlet. See Figure 2.

Example: a ø 50 mm pipe requires a 250 mm straight line before the pump's suction inlet. This will allow the pump to prime faster and operate longer.

IMPORTANT: DO NOT install 90° elbows directly at the pump inlet or outlet.

• Install the pump as close to the pool as possible.

• Use a direct and short suction hose with a constant slope to avoid long priming times.

• The pump must be fixed on a flat and solid base, high enough to avoid submerging the motor.

• Install the filter and pump in a protected area, ensuring adequate ventilation and access for maintenance.

• Do not install the control devices directly above the pump.

• Ensure adequate ground drainage to avoid exposing the pump to water.

• Prepare all pipes to the correct dimensions and reduce the number of elbows as much as possible.

• Provide independent support for the pipe near the pump's suction and discharge to reduce strain on the pump.

• Avoid overtightening pipe joints.

• Only use sealing materials designed for plastic materials for the pipes.

• Avoid petroleum-based products. It is essential that the suction hose has no air leaks. Its diameter must always be at least equal to that of the pump's suction port.

• To prevent water from flowing in the wrong direction and the impeller from loosening, installing a non-return valve after the pump is strongly recommended. 

For plumbing: 

1. For improved pool plumbing, it is recommended to use a larger pipe size.

2. The diameter of the piping on the pump's suction side must be identical to or larger than that of the return line.

3. The piping on the pump's suction side must be as short as possible.

4. For most installations, Pentair recommends installing a valve on both the suction and return lines to allow the pump to be isolated during routine maintenance. However, we also recommend that any valve, elbow, or tee installed on the suction line not be placed at a distance from the front of the pump less than five (5) times the diameter of the suction line. Independently support the pipe near the pump's suction and discharge to reduce stress on the pump. Use plastic pipe sealants.

The suction line should be the same size as the pump's suction inlet.

Example: a ø 50 mm pipe requires a 250 mm straight line before the pump's suction inlet. This will allow the pump to prime faster and operate longer.

IMPORTANT: DO NOT install 90° elbows directly at the pump's inlet or outlet.

Shipping within 1 business day

Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.

All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.

Shipping costs

For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.

For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.

Returns

You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr