Sta-Rite 1.5 HP Single Phase Pump (20 m³/h) - Pentair

Designed for large pools (up to 80-85 m³) or demanding installations, the Sta-Rite 1.5 HP delivers a powerful flow rate of 20 m³/h. It is particularly recommended if your plant room is far from the pool or if you need to power peripheral equipment (heating, pressure robot).

Designed to replace the famous 5P2R and S5P2R models, the Sta-Rite 1 hp combines technological expertise, reliability, and efficiency to meet the needs of the most demanding private pools and spas.

Why choose the Sta-Rite pump?

Enjoy Pentair innovation with the Sta-Rite, a filtration pump designed to offer exceptional performance, increased durability, and simplified maintenance.

1. Cutting-edge performance

• Self-priming: Simplifies starts even after a prolonged shutdown.
• High hydraulic efficiency: Optimized flow rate for pools up to 20 m³/h.
• Robust motor: Oversized to withstand overloads of up to 20% and deliver constant power.

2. Reliability and robustness

• Superior quality materials: Fiberglass reinforced, it resists corrosion, low temperatures, and pressure.
• Compatibility: Suitable for fresh and salt water (up to 4 g/L), perfect for pools and spas.
• Certifications: Complies with CE standards with IP55 protection.

3. Simplified maintenance

• Transparent pre-filter: Allows you to check the basket's condition without disassembly.
• Union fittings included: Quick and secure installation, without complications.
• Accessibility: Compact design for easy maintenance, even in confined spaces.

4. Quiet operation
Thanks to a perfectly balanced impeller, the Sta-Rite operates almost silently, ideal for preserving the tranquility of your pool area.

Technical specifications

• Power supply: Single-phase 230V
• Reliable and quiet operation
• High hydraulic efficiency
• Robust and durable materials
• Supplied with 2 x Ø 50 mm union fittings
• Compatible with fresh and saltwater pools (up to 4 gr/L)

Sta-Rite pump power consumption

Easy installation

• Quick connection: Supplied with Ø 50 mm unions, the pump is easy to install.
• Simplified replacement: Compatible with old 5P2R and S5P2R ranges.
• Compatibility: Adapts to various filtration and water treatment systems.
• Practical maintenance: Removable pre-filter basket accessible with a single gesture.

Ecological and economic advantages

• Increased durability: Fewer replacements needed thanks to robust materials.
• Energy optimization: High efficiency reducing energy consumption in the long term.
• Environmental compliance: Manufactured according to strict standards to minimize its ecological impact.

Dimensions of the STA-RITE filtration pump

PENTAIR filtration pumps technical information

• Install the pump as close to the pool as possible.

• Use a direct and short suction hose with a constant slope to avoid long priming times.

• The pump must be fixed on a flat and solid base, high enough to avoid submerging the motor.

• Install the filter and pump in a protected area, ensuring adequate ventilation and access for maintenance.

• Do not install the control devices directly above the pump.

• Ensure adequate ground drainage to avoid exposing the pump to water.

• Prepare all pipes to the correct dimensions and reduce the number of elbows as much as possible.

• Provide independent support for the pipe near the pump's suction and discharge to reduce strain on the pump.

• Avoid overtightening pipe joints.

• Only use sealing materials designed for plastic materials for the pipes.

• Avoid petroleum-based products. It is essential that the suction hose has no air leaks. Its diameter must always be at least equal to that of the pump's suction port.

• To prevent water from flowing in the wrong direction and the impeller from loosening, installing a non-return valve after the pump is strongly recommended. 

For plumbing: 

1. For improved pool plumbing, it is recommended to use a larger pipe size.

2. The diameter of the piping on the pump's suction side must be identical to or larger than that of the return line.

3. The piping on the pump's suction side must be as short as possible.

4. For most installations, Pentair recommends installing a valve on both the suction and return lines to allow the pump to be isolated during routine maintenance. However, we also recommend that any valve, elbow, or tee installed on the suction line not be placed at a distance from the front of the pump less than five (5) times the diameter of the suction line. Independently support the pipe near the pump's suction and discharge to reduce stress on the pump. Use plastic pipe sealants.

The suction line should be the same size as the pump's suction inlet.

Example: a ø 50 mm pipe requires a 250 mm straight line before the pump's suction inlet. This will allow the pump to prime faster and operate longer.

IMPORTANT: DO NOT install 90° elbows directly at the pump's inlet or outlet.

Shipping within 1 business day

Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.

All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.

Shipping costs

For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.

For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.

Returns

You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr