Pool Filter Pump 23 m³/h - 1.5 HP (Mono) | Pentair Ultraflow

The 1.5 HP version of the Ultraflow Plus is designed for large pools (up to 85 m³) or demanding technical configurations. Thanks to its high flow rate of 23 m³/h, it effectively compensates for head losses if your pump room is far from the pool, while ensuring the proper functioning of your equipment (heat pump, robots).

Key Features of the Pentair Ultra-Flow 1.5 HP Single-Phase Pump:

• A unique "Cam & Ramp" locking lid, easy to use with a simple quarter-turn
• An extra-large pre-filter basket for easy maintenance and longer cleaning intervals for a better user experience
• A thick-walled pump body for quiet operation
• Suitable for salt treatment in pools
• Entirely manufactured in Europe, in Pisa, Italy

The Ultra-Flow Plus, a high-performance Pentair Water pump:

• Guarantees optimal efficiency and reduces and simplifies maintenance
• A special corrosion-resistant stainless steel motor shaft
• A single-phase motor with thermal protection
• A stainless steel mounting flange for easy pump disassembly
• 2" ports for quick priming and better flow
• Three-year limited warranty, except for wear parts (mechanical seal 90 days)

Comparative table of technical specifications for all Pentair Ultraflow Plus Single-Phase pump models:

To choose your pool pump, you need to know the required flow rate in m³/h for your pool.

UltraFlow Plus Dimensions

What are the advantages of the Ultraflow Plus 1.5 HP Single-Phase pump?

1. Exceptional hydraulic performance

• High performance: A powerful flow rate of 23 m³/h for optimal operation.
• Quick self-priming: Reduces the time needed to start the system.
• Stainless steel motor shaft: Corrosion-resistant for increased durability.
• Very good energy efficiency: Allows for low consumption and thus saves energy.

2. Simplified maintenance

• Cam & Ramp cover: Easily removes with a quarter turn for quick access to the basket. Easy to use.
• XL pre-filter basket: Reduces cleaning intervals thanks to its large capacity.
• Stainless steel flange: Facilitates disassembly for maintenance operations.

3. Quiet and robust

• Thick-walled pump body: Anti-vibration design for quiet operation.
• Resistant and durable materials: Designed to resist chemicals, corrosion, and UV.

4. Compatible with salt treatment

• Perfect for saltwater pools using up to 4 g/L of salt.

5. Value for money

In this range and with these performances, it offers a competitive price.

How to install the Pentair Ultra-Flow pump?

To optimize the performance of this 23 m³/h model, we recommend 63mm piping.

• Install the Ultraflow as close as possible to the pool.
• Use a direct and short suction pipe with a constant slope to avoid long priming times.
• The pump must be fixed on a flat and solid base, high enough to avoid submerging the motor.
• Install the filter and pump in a protected area, ensuring adequate ventilation and access for maintenance.
• Do not install adjustment devices directly above the pump. • Ensure sufficient floor drainage to prevent the pump from being exposed to water.
• Prepare all pipes to the correct dimensions and reduce the number of elbows as much as possible.
• Provide independent support for the pipe near the suction and discharge of the pump to reduce stress on the pump.
• Avoid excessive tightening of pipe joints.
• Only use sealing materials intended for plastics for the pipes.
• Avoid petroleum-based products. It is essential that the suction pipe has no air intake. Its diameter must always be at least equal to that of the pump's suction port.
• To prevent hydraulic circulation in the wrong direction and loosening of the impeller, installing a non-return valve after the pump is strongly recommended.

We also recommend that a valve, elbow, or tee installed on the suction line not be placed at a distance from the front of the pump less than five (5) times the diameter of the suction line. Independently support the pipe near the suction and discharge of the Pentair pump to reduce stress on the pump. Use plastic pipe sealants.

The suction line should be the same size as the Ultraflow pump's suction inlet. See Figure 2.

Example: a ø 50 mm pipe requires a 250 mm straight section before the pump's suction inlet. This will allow the pump to prime faster and operate longer.

IMPORTANT: DO NOT install 90° elbows directly at the pump's inlet or outlet.

• Install the pump as close to the pool as possible.

• Use a direct and short suction pipe with a constant slope to avoid long priming times.

• The pump must be fixed on a flat and solid base, high enough to prevent the motor from being submerged.

• Install the filter and pump in a protected area, ensuring adequate ventilation and access for maintenance.

• Do not install control devices directly above the pump.

• Ensure adequate floor drainage to prevent the pump from being exposed to water.

• Prepare all pipes to the correct dimensions and reduce the number of elbows as much as possible.

• Provide independent support for the pipe near the pump's suction and discharge to reduce strain on the pump.

• Avoid overtightening pipe connections.

• Only use sealing materials designed for plastics for the pipes.

• Avoid petroleum-based products. It is essential that the suction pipe has no air leaks. Its diameter must always be at least equal to that of the pump's suction port.

• To prevent water from flowing in the wrong direction and the impeller from loosening, installing a non-return valve after the pump is strongly recommended. 

For plumbing: 

1. For improved pool plumbing, it is recommended to use a larger pipe size.

2. The diameter of the piping on the pump's suction side must be equal to or larger than that of the return line.

3. The piping on the pump's suction side must be as short as possible.

4. For most installations, Pentair recommends installing a valve on both the suction and return lines to isolate the pump during routine maintenance. However, we also recommend that a valve, elbow, or tee installed on the suction line should not be placed closer than five (5) times the diameter of the suction line from the front of the pump. Independently support the pipe near the pump's suction and discharge to reduce the stress on the pump. Use plastic pipe sealants.

The suction line should be the same size as the pump's suction inlet.

Example: a ø 50 mm pipe requires a 250 mm straight section before the pump's suction inlet. This will allow the pump to prime faster and run longer.

IMPORTANT: DO NOT install 90° elbows directly at the pump's inlet or outlet.

Shipping within 1 business day

Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.

All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.

Shipping costs

For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.

For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.

Returns

You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr