Pack of 5 CCEI Stainless Steel Level Sensors for NIVA 5, CRBTRN, Lineo 5S, CRNSE Pool Controllers – Wiring Included

Pack of 5 CCEI Stainless Steel Level Sensors: Renew Your Entire Detection System

After several years of service, the level sensors of your CCEI regulator can lose sensitivity due to limescale deposits, biofilm, or the natural aging of the contacts. Rather than replacing the sensors one by one as they fail, this pack of 5 CCEI SE-1 stainless steel level sensors with cabling allows you to refurbish the entire detection system in a single operation. This is the most reliable solution to start fresh and ensure homogeneous operation of all sensors.

The 5 sensors are made of stainless steel resistant to corrosion caused by chlorine, bromine, and salt. They operate by electronic detection (contact or capacitance variation), without any moving mechanical parts. This principle eliminates the risk of blockage by debris and ensures reliability for 10 to 15 years under normal use.

Compatibility with CCEI Control Boxes

This pack of 5 SE-1 sensors is compatible with all CCEI multi-sensor level control boxes. The NIVA 5 (ref. PF10L008) uses 5 sensors to control filling, overflow, and low water safety for infinity pools with a surge tank. The CRBTRN (ref. PF10L011) performs the same functions in a compact box. The Lineo 5S and the CRNSE complete the range with configurations adapted to other types of installations.

The pack can also serve as a spare stock for NIVA 3 boxes (ref. PF10L009), which only use 3 sensors: the remaining 2 sensors then become readily available spare parts in case of future need.

Please note: these sensors are not compatible with the RNS-2 box, which uses a specific 3-point sensor (ref. SE-3) with a 10-meter cable. Check the exact model of your control box before ordering.

Why Replace All Sensors at Once?

When one sensor begins to show signs of weakness (erratic detections, continuous filling, lack of filling), it is likely that the other sensors in the same set are in a comparable state of wear. Replacing only the faulty sensor exposes you to the risk of having to intervene again a few weeks later on another sensor. Simultaneous replacement of the entire set guarantees homogeneous sensitivity across all detection thresholds and avoids false levels caused by reactivity differences between a new sensor and aging sensors.

This is particularly important for NIVA 5 and CRBTRN boxes, where the 5 sensors define distinct thresholds (start of filling, end of filling, low water safety, start of overflow, stop of overflow). Inconsistency between sensors can cause unpredictable behavior of the regulator, with untimely filling cycles or forced operation.

Installation in the Surge Tank or Skimmer

For infinity pools (NIVA 5, CRBTRN), the 5 sensors are placed in the surge tank at different heights corresponding to the detection thresholds programmed in the box. CCEI recommends installing them in a channel or PVC pipe to keep them separated, prevent entanglement, and ensure reliable detection. The sensor triggering forced operation (S1) must be below the overflow of the tank.

For skimmer pools (NIVA 3), the 3 necessary sensors are attached inside the skimmer on a mounting rail, at the height corresponding to the desired water level. The provided wiring connects the sensors to the control box installed in the technical room. If the distance exceeds the cable length, it is possible to extend it with a waterproof junction box, without exceeding 50 meters between the box and the junction box.

Pack of 5 or Individual Sensor?

Pool Planet also offers the CCEI stainless steel level sensor individually with 6 m of cabling, for occasional replacement of a single faulty sensor. The pack of 5, however, is the recommended choice when your installation is more than 5 years old or if you experience recurrent malfunctions on the regulator, as it ensures a complete overhaul of the detection system in a single shipment.

• 5 SE-1 stainless steel level probes
• Connection wiring

Shipping within 1 business day

Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.

All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.

Shipping costs

For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.

For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.

Returns

You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr