Replacement cell for Turbo Salt TS40 salt chlorinator

A drop in chlorine production can quickly impact water quality. The original Poolex Turbo Salt TS40 replacement cell allows you to regain efficient and continuous disinfection, without changing your entire device.

Specifically designed for the Turbo Salt 40 m³ (TS400) model, this cell guarantees perfect compatibility with your control unit and chlorine production adapted to medium-sized pools. It ensures clear, balanced, and pleasant water for swimming.

To maintain its performance, it is recommended to keep a stable salt level at 3.5 g/L and a pH between 7.0 and 7.4.

Chlorine production adapted to pools up to 40 m³

In a salt chlorinator, the cell is the central element that transforms salt into natural chlorine. Over time, the titanium plates wear out or scale up, which reduces their effectiveness.

Installing a new TS40 cell allows you to:

• Restore optimal chlorine production
• Stabilize water quality
• Extend the life of your chlorinator
• Avoid complete system replacement

Advantages of the Turbo Salt TS40 cell

• Dedicated compatibility: designed exclusively for the Poolex Turbo Salt 40 m³ (TS400) chlorinator.
• Adapted power: ideal for intermediate-sized pools requiring greater chlorine production than a 20 m³ model.
• Resistant materials: titanium plates treated to withstand repeated electrolysis cycles and limit corrosion.
• Quick replacement: simple installation without modification of the existing setup.

How to replace the Turbo Salt cell?

The replacement for the Turbo Salt chlorinator has been designed to be a simple and quick maintenance operation, requiring no complex technical intervention. By choosing this official Poolex replacement cell, you ensure a part perfectly suited to your control box.

Here are the step-by-step instructions for a successful Turbo Salt replacement:

1. Power off: for your safety, turn off the salt chlorinator and the filtration pump.
2. Disassembly: unscrew the clamping rings at both ends of the used Turbo replacement cell. If the rings are stiff, use a strap wrench, without forcing the pipework.
3. Extraction: remove the old cell from the circuit. Take the opportunity to check the condition of the seals.
4. Installation: insert the new chlorinator compatible cell Poolex TS40, respecting the mounting direction if indicated.
5. Tightening: screw the rings firmly by hand. Excessive tightening with tools is not necessary and could crack the plastic.
6. Restart: restart the filtration, check for leaks, then power on your Turbo Salt.

What is the lifespan of a cell?

The lifespan of a chlorinator cell is the key factor in ensuring constant and efficient chlorine production. On average, a Turbo Salt cell offers a longevity of between 5,000 and 7,000 hours of actual operation.

Several parameters directly influence this duration:

• Water balance: a pH maintained between 7.0 and 7.4 is crucial to prevent premature scaling of the titanium plates.
• Salt level: be sure to respect the recommendation of 3.5 g/L. A lack of salt forces the device to work harder.
• Winterization: remove the cell or stop electrolysis when the water temperature drops below 15°C.

If your chlorine production drops despite a correct salt level, it is a sign that your cell is reaching the end of its cycle. Replacing it with a new TS40 cell is then the most economical solution.

How to install a Poolex chlorinator?

The installation of a Poolex chlorinator is accessible to everyone. The Poolex Turbo Salt model stands out for its compactness, which makes it easy to install on above-ground structures or small in-ground pools.

1. Location: the cell must be positioned on your filtration circuit, imperatively after the filter and before any heating system.
2. Hydraulic connection: thanks to its multi-diameter connections (32/38 mm), it connects in series directly to your piping. No complex bypass is required.
3. Electrical connection: connect the device to a standard 230V grounded mains socket.
4. Operation: once the water is salted, the passage of current between the plates transforms the salt into natural chlorine cyclically.

What Turbo Salt cell models are available?

The choice depends on the volume of water to be treated:

• TS200 Cell: For pools up to 20 m³.
• TS400 Cell: For pools up to 40 m³ (model concerned).
• TS800 Cell: For large volumes up to 80 m³.

The following models are also available: TS100 cell, TS300 cell, TS60 cell.

Make sure to choose the model corresponding to the capacity of your control unit.

The Poolex Turbo Salt TS40 replacement cell is the ideal solution for maintaining effective disinfection in pools up to 40 m³. Choosing an original Poolex part means choosing reliability and performance.

Shipping within 1 business day

Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.

All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.

Shipping costs

For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.

For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.

Returns

You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr