Replacement cell for Poolex TS80 salt chlorinator

When chlorine production decreases, water balance becomes more difficult to maintain. The Poolex Turbo Salt TS80 replacement cell allows you to restore full efficiency to your salt chlorinator and ensure reliable disinfection for pools up to 80 m³.

Specially designed for the Turbo Salt TS80 model, this original cell guarantees perfect compatibility with your device and a treatment capacity adapted to large volume pools. It allows you to regain clear, healthy, and comfortable water for swimming, without replacing the entire system.

To preserve its performance, ensure a constant salt level of 3.5 g/L and a pH between 7.0 and 7.4.

Treatment capacity adapted to large volumes

A salt chlorinator cell transforms the salt present in the water into natural chlorine. Over time, the titanium plates can scale or wear out, reducing chlorine production. Installing a new TS80 cell allows you to:

• Restore effective disinfection
• Maintain a stable water balance
• Optimize the operation of your chlorinator
• Extend the lifespan of your equipment

For pools up to 80 m³, it is essential to use a cell adapted to this volume to ensure sufficient production.

Advantages of the Turbo Salt TS80 cell

• Dedicated compatibility: designed exclusively for the Poolex Turbo Salt TS80 chlorinator.
• Power adapted to pools up to 80 m³: chlorine production sized for larger volumes.
• High-resistance titanium plates: excellent resistance to repeated electrolysis cycles and corrosion.
• Simple replacement: quick installation without modification of your hydraulic circuit.

How to replace the Turbo Salt cell?

The Turbo Salt chlorinator replacement was designed to be a simple and quick maintenance operation, requiring no complex technical intervention. By choosing this official Poolex replacement cell, you ensure a perfectly fitted part for your control box.

Here are the step-by-step instructions for a successful Turbo Salt replacement:

1. Power off: for your safety, turn off the salt chlorinator and cut off the filtration pump.
2. Disassembly: unscrew the clamping rings at both ends of the used Turbo replacement cell. If the rings are stiff, use a strap wrench, but be careful not to force the piping.
3. Extraction: remove the old cell from the circuit. Take this opportunity to check the condition of the seals.
4. Installation: insert the new Poolex TS80 compatible chlorinator cell, observing the direction of installation if indicated.
5. Tightening: screw the rings back on firmly by hand. Excessive tightening with tools is not necessary and could crack the plastic.
6. Restart: restart the filtration, check for leaks, then power on your Turbo Salt.

What is the lifespan of a cell?

The lifespan of a chlorinator cell is the key factor in ensuring consistent and effective chlorine production. On average, a Turbo Salt cell offers a longevity of between 5,000 and 7,000 hours of actual operation.

Several parameters directly influence the cell lifespan of your salt chlorinator:

• Water balance: a pH maintained between 7.0 and 7.4 is crucial. Water that is too hard can scale the titanium plates.
• Salt level: ensure the recommendation of 3.5 g/L is respected. A lack of salt forces the device to work harder.
• Winterizing: remove the cell or turn off electrolysis when the water drops below 15°C.

If you notice that your chlorine production drops despite a correct salt level, it is a sign that your cell is reaching the end of its cycle.

How to install a Poolex chlorinator?

Installing a Poolex chlorinator is accessible to everyone. The Poolex Turbo Salt chlorinator stands out for its compactness, making it easy to install on above-ground structures or small inground pools.

1. Location: the cell must be positioned after the filter and before any heating system.
2. Hydraulic connection: thanks to its 32/38 mm fittings, it connects in series directly to your piping.
3. Electrical connection: connect the device to a standard grounded 230V mains socket.
4. Operation: once the water is salted, the passage of current transforms salt into natural chlorine.

What Turbo Salt cell models are available?

The Poolex range offers a solution depending on the volume of water to be treated:

• TS200 Cell: For pools up to 20 m³.
• TS400 Cell: For pools up to 40 m³.
• TS800 Cell: For large volumes up to 80 m³ (model concerned).

The following models are also available: TS100 cell, TS300 cell, TS60 cell.

Be sure to choose the model corresponding to the capacity of your control box.

The Poolex Turbo Salt TS80 replacement cell is the ideal solution to ensure effective disinfection. Choosing an original Poolex cell means securing the quality of your water season after season.

Shipping within 1 business day

Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.

All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.

Shipping costs

For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.

For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.

Returns

You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr