PHILEO VP POD-CCEI Connected Automatic pH Regulator

Phileo VP POD: the connected, automatic, and ultra-simple to install pH regulator for your pool

The Phileo VP POD with Zelia-POD is much more than a simple pH regulator for swimming pools: it is a connected, intuitive, and fully automated solution to ensure optimal water quality in your pool. Thanks to its advanced technology and simplified installation, the Phileo VP POD is now considered the easiest pH regulator to install on the market, with no reliance on the filtration pump.

Automatic pH+ and pH- regulation for pools

The Phileo VP POD automatically adjusts the injection of the corrective solution (pH+ or pH-) based on the pH measured in your pool water. This process relies on a high-precision pH probe strategically positioned after filtration. The device continuously analyzes the water's pH and triggers injection if the value falls outside the defined range.

The setpoint range is fully configurable, from 6.8 to 7.6, which corresponds to the ideal zone for effective chlorine disinfection. A well-regulated pH is essential to avoid irritation, protect equipment, and optimize chemical treatments.

Immediate visualization of water status via a light system

The Phileo VP POD stands out with its RGB LED system integrated into the dosing pump, allowing for instant reading of the pool's status:

• Green: everything is perfect, pH is stable.
• Orange: the measurement is close to the target value.
• Red: the pH is too far off, and correction is needed.

This visual diagnostic system allows for quick reading in the technical room, without needing to open the app or interpret complex data. True peace of mind every day!

Remote control via an intuitive mobile app

The Phileo VP POD can be controlled both from the device itself and from a dedicated mobile application, Vigipool, available on smartphones. Thanks to this user-friendly interface, you can:

• View real-time pH measurements.
• Monitor the volume of solution injected.
• Set up overdose alarms.
• Modify the setpoint value.
• Perform a precise two-point calibration of the pH probe for better reliability.
• Manage the volume of your pH tank.

With the mobile app, pH regulation becomes smart and mobile: you keep an eye on your water, even remotely.

Simplified installation with the Zelia-POD

The Phileo VP POD comes with the ZELIA POD measuring chamber, an ingenious module that brings together all essential accessories in one place:

• The pH probe.
• The solution injector.
• The flow sensor.

No more complex installations and risky connections! The Zelia-POD allows for centralized, quick, and clean installation, even in small technical rooms.

The device is also supplied with:

• A 230V mains plug, avoiding any reliance on the filtration pump.
• A calibration kit with flask and solution.
• A complete injection kit.

Smart and adaptive operation

How does the Phileo VP POD work?

The operation of the Phileo VP is based on a logical sequence:

• Water passes through the pH probe after filtration.
• The measured value is transmitted to the central unit.
• If it is outside the defined range, the Phileo VP POD will inject the necessary amount of solution.
• A lighted LED visually indicates the pH status.
• The flow sensor checks that the pump is circulating before any injection.

This system ensures safety, precision, and responsiveness in water treatment.

What are the advantages of the Phileo VP POD?

Here is a summary of the major assets of the Phileo VP POD regulator:

• Ultra-simple installation: 230V plug, no servitude required.
• Automatic filtration detection via flow sensor.
• Instant visual reading thanks to the RGB LED.
• Remote control via an intuitive application.
• Compatible with pH+ and pH-, depending on your needs.
• Precise two-point calibration.
• Intuitive interface, directly on the device or via smartphone.
• Zelia-POD for clean and centralized installation.
• Daily time savings, reduced manual interventions.

How to remotely control your pool's pH regulation with the Phileo VP POD?

Remote control of the Phileo VP POD is done via the associated mobile application. Once connected to your device, you access all useful data:

• Real-time pH level.
• Injection history.
• Alerts in case of overdose or significant deviation.
• Remaining solution volume.
• Setpoint parameters.

This allows you to manage water quality remotely, even when you are away, and to act quickly in case of a detected problem.

Why is pH regulation essential?

The pH of the water influences all other treatment parameters. Poorly regulated pH can lead to:

• Ineffectiveness of chlorine or other disinfectants.
• Limescale deposits or corrosion.
• Skin or eye irritation for swimmers.
• Premature wear of equipment (pumps, filters, liners).

The Phileo VP POD ensures lasting pH stability, without constant manual intervention, for healthy, balanced, and pleasant water throughout the season.

The Phileo VP POD is much more than a simple pH regulator: it is an automatic and connected regulator that integrates perfectly into your pool home automation system for effortless automatic maintenance. This intelligent connected device allows you to adjust your pool's pH in real time according to a defined setpoint, by precisely injecting an adapted corrective agent (pH+ or pH-) constantly if necessary, as soon as it is needed.

Thanks to its WiFi connection and intuitive mobile application, you can access all essential information about your installation from an intuitive, unique, and clear screen, whether in your technical room or remotely via the Vigipool application on your smartphone. This gives you permanent monitoring of dosing and simple control of your treatment products.

This connected regulator guarantees maximum comfort while achieving significant savings on chemical products, by avoiding waste and overdosing.

• 1 Phileo VP regulator
• 1 pH probe
• 1 Calibration kit (buffer solution + bottle)
• 1 Injection kit
• 1 Zelia-POD measurement chamber
• 1 Flow sensor
• 1 230V mains plug
• 1 Technical data sheet

Shipping within 1 business day

Our packages are shipped daily via DPD, Colissimo, Chronopost, UPS, and DHL and are insured.

All orders placed before noon, Monday to Friday, are shipped the same day, and orders placed after noon are shipped the following business day.

Shipping costs

For mainland France, shipping costs are free for purchases over 150 euros. Below this amount, the delivery cost depends on the weight of your package and the carrier you select.

For international shipments, shipping costs can vary, depending on the destination and the cargo, from 4 euros to over 100 euros.

Returns

You can return your product within the 14-day withdrawal period upon receipt of your order by contacting customer service via email at contact@poolplanet.fr