{"product_id":"solution-de-nettoyage-h2o-60ml-meytec","title":"Meytec H2O 60 mL Electrode Cleaning Solution – pH ORP EC Pool Probes","description":"\u003ch2\u003eMeytec H2O cleaning solution: essential maintenance for your pool electrodes\u003c\/h2\u003e\n\n\u003cp\u003epH, ORP (Redox), and EC (conductivity) probes are at the heart of your pool's automatic water treatment regulation. Over time, deposits of limescale, biofilm, grease, and organic residues accumulate on the sensitive membrane of the electrode. This progressive fouling degrades the accuracy of measurements and can lead to errors in dosing your treatment products. Meytec's H2O cleaning solution, packaged in a 60 mL bottle, has been formulated to effectively dissolve these impurities without harming the fragile components of your probes.\u003c\/p\u003e\n\n\u003cp\u003eMeytec is a European manufacturer specializing in certified calibration solutions and measurement instruments for water treatment. Its products are manufactured according to the strictest international standards and benefit from NIST traceability with a certificate of analysis. The H2O cleaning solution is part of a comprehensive range that also includes pH and ORP calibration buffer solutions, as well as KCL storage solution for electrode winterization.\u003c\/p\u003e\n\n\u003ch2\u003eWhy regularly clean your pool measurement probes?\u003c\/h2\u003e\n\n\u003cp\u003eA fouled electrode no longer transmits reliable values to your regulator. Specifically, if your pH probe displays an incorrect pH, the regulator will adjust the acid or base injection inappropriately, which can lead to cloudy, irritating, or poorly disinfected water. The same reasoning applies to the Redox probe for disinfection control and the conductivity probe for managing the salt level of an electrolyzer.\u003c\/p\u003e\n\n\u003cp\u003eRegular cleaning, ideally once a month during the swimming season, helps maintain membrane reactivity and measurement accuracy. It's a simple step that significantly extends the lifespan of your electrodes, the replacement of which represents a significant cost.\u003c\/p\u003e\n\n\u003ch2\u003eHow to use Meytec H2O solution\u003c\/h2\u003e\n\n\u003cp\u003eUsing the cleaning solution is simple and requires no special tools. Start by rinsing the electrode with clear water or distilled water. Then immerse the tip of the probe in the H2O solution for about ten minutes to allow the liquid to act on the deposits. Rinse the electrode thoroughly with water before putting it back into service or placing it in a KCL storage solution if you are removing it for winterization. Never use household products, vinegar, or hydrochloric acid to clean a probe: these substances can irreparably damage the sensitive glass membrane of the electrode.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal compatibility with market probes\u003c\/h2\u003e\n\n\u003cp\u003eMeytec H2O cleaning solution is compatible with all pH, ORP, and EC electrodes, regardless of the brand of your regulator or analyzer: CCEI, Hayward, Zodiac, Pentair, Astralpool, Bayrol, Ondilo, or any other manufacturer using standard BNC connector probes. It is suitable for both in-line probes mounted on the hydraulic circuit and removable electrodes of portable testers.\u003c\/p\u003e\n\n\u003ch2\u003eH2O solution, KCL solution, buffer solution: what are the differences?\u003c\/h2\u003e\n\n\u003cp\u003eThe Meytec range includes several types of solutions, each playing a distinct role in maintaining your probes. The H2O cleaning solution is used to remove deposits and impurities accumulated on the membrane. The KCL storage solution keeps the electrode in an optimal humid and ionic environment when not in use, especially during winterization. Buffer solutions (pH 4, pH 7, pH 9, ORP 475 mV, etc.) are used for calibration, i.e., to verify and recalibrate measurement accuracy.\u003c\/p\u003e\n\n\u003cp\u003eFor complete maintenance of your probes, it is recommended to proceed in the following order: cleaning with H2O solution, then calibration with the corresponding buffer solution, and finally storage in KCL solution if the probe is removed from the circuit. Pool Planet offers all these Meytec solutions in individual 60 mL bottles or as a complete kit.\u003c\/p\u003e\n\n\u003ch2\u003ePractical and economical format\u003c\/h2\u003e\n\n\u003cp\u003eThe 60 mL bottle is perfectly suited for domestic use. A few milliliters are enough to immerse the tip of a probe, which represents several cleanings per bottle. The compact format is easy to store in the technical room and keeps for a long time thanks to an extended shelf life.\u003c\/p\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139888017745,"sku":"H20-60","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5261-13110-1-meytec-solution-de-nettoyage-5x60ml__50564__68035.1741610858.1280.1280.png?v=1760744871","url":"https:\/\/www.poolplanet.com\/en\/products\/solution-de-nettoyage-h2o-60ml-meytec","provider":"Pool Planet","version":"1.0","type":"link"}