{"product_id":"pompe-doseuse-peristaltique-mp1","title":"Peristaltic Dosing Pump MP1","description":"\u003ch2\u003eMicrodos MP1 Peristaltic Dosing Pump – Replacement for CCEI Controllers\u003c\/h2\u003e\n\n\u003cp\u003eIs the dosing pump on your CCEI controller no longer working correctly? \nIs it injecting irregularly, making abnormal noise, or not starting? \nThe \u003cstrong\u003eMicrodos MP1 peristaltic dosing pump\u003c\/strong\u003e is the original \nreplacement part designed for all compatible CCEI controllers and electrolyzers. \nIt ensures precise and constant injection of treatment products — pH minus, pH \nplus, flocculant — to maintain a perfectly controlled water balance without manual intervention.\u003c\/p\u003e\n\n\u003cp\u003eIt is an essential component in any automatic water treatment system. \nWithout a functional dosing pump, even the best controller on the market becomes \nincapable of correcting pH or injecting the product at the right time. Quickly \nreplacing a faulty pump prevents water imbalances, irritations, and premature \nequipment degradation.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility with CCEI Controllers and Electrolyzers\u003c\/h2\u003e\n\n\u003cp\u003eThe Microdos MP1 is the reference peristaltic dosing pump for the CCEI range. \nIt is compatible with the following devices:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eLimpido XC LAB\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLimpido Pro pH\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLimpido Pro Lab\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePhileo and Phileo LT\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eOxeo, Oxeo LT and Oxeo SP\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEqualizo DUO\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis list covers most of the installed CCEI controllers among individuals and \nprofessionals. If you own one of these devices and your dosing pump shows signs \nof failure, the MP1 is the part to order.\u003c\/p\u003e\n\n\u003ch2\u003eHow does a peristaltic dosing pump work?\u003c\/h2\u003e\n\n\u003cp\u003eUnlike a diaphragm pump, a peristaltic pump operates by progressive compression \nof a flexible tube — the Santoprene tube — between a rotor and a fixed wall. \nThis \"peristaltic\" movement creates a regular and perfectly metered suction \nand discharge of the treatment liquid, without the chemical product ever coming \ninto contact with the mechanical parts of the pump.\u003c\/p\u003e\n\n\u003cp\u003eThis principle offers several decisive advantages for use in pool water treatment: \nthe pump is insensitive to corrosive products such as acids used to lower pH, it \ndoes not clog, and its flow rate remains constant and reproducible cycle after \ncycle. Injection accuracy is thus guaranteed over time, which is essential for \nreliable automatic regulation.\u003c\/p\u003e\n\n\u003ch2\u003eSimple installation, reduced maintenance\u003c\/h2\u003e\n\n\u003cp\u003eReplacing the MP1 dosing pump does not require technician intervention. \nThe pump comes with its connector and Santoprene tubing, ready to be connected \nto your controller. Simply disconnect the old pump, connect the new one in the \nsame location, and check the tightness of the fittings before putting it back into service.\u003c\/p\u003e\n\n\u003cp\u003eThe supplied Santoprene tube is the main consumable for this type of pump: \nit wears out gradually over cycles. Its lifespan depends on the frequency of use \nand the injected products, but it is easily replaceable independently of the pump \nitself when it shows signs of wear (cracks, loss of flexibility, leaks).\u003c\/p\u003e\n\n\u003ch2\u003eWhen to replace your dosing pump?\u003c\/h2\u003e\n\n\u003cp\u003eSeveral signs indicate that it is time to change the dosing pump of your CCEI controller. \nIrregular dosing often results in unexplained pH variations despite correct probe calibration. \nAn abnormal clicking or vibrating noise can indicate wear of the tube or rotor. \nA product leak around the pump, or conversely a total absence of injection verifiable \nby observing the outlet hose, are clear signs of failure.\u003c\/p\u003e\n\n\u003cp\u003eIn all these cases, replacing the dosing pump is the quickest and least expensive \nsolution before considering replacing the entire controller. The MP1 is a normal \nwear part on an automatic treatment system used for several years — anticipating \nits replacement is part of rigorous maintenance of your installation.\u003c\/p\u003e\n\n\u003ch2\u003eAn original part for preserved performance\u003c\/h2\u003e\n\n\u003cp\u003eBy choosing the Microdos MP1, you are opting for the original part recommended \nby CCEI for its controllers. Using a non-compliant replacement dosing pump can \nlead to flow, sealing, or electrical compatibility problems with the controller. \nThe MP1 guarantees seamless integration and identical performance to the original, \nso that your automatic treatment system continues to function exactly as intended.\u003c\/p\u003e\n\n\u003cp\u003eDelivered with its connector and Santoprene tubing, it is ready to install upon \nreceipt, without having to order additional parts.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139634590033,"sku":"MPTE0216","price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5004-12189-0-pompe-doseuse-peristatique-mp1-piscine-ccei__57586__52829.1741626044.1280.1280.png?v=1760741060","url":"https:\/\/www.poolplanet.com\/en\/products\/pompe-doseuse-peristaltique-mp1","provider":"Pool Planet","version":"1.0","type":"link"}