{"product_id":"kit-de-remise-en-route-traitement-piscine","title":"Start-up kit for swimming pool treatment testing and regulation","description":"\u003ch2\u003eCCEI Microdos Dosing Pump Startup Kit: Prepare Your Pool for the Season\u003c\/h2\u003e\n\n\u003cp\u003eAt the start of every season, peristaltic dosing pumps require specific maintenance to restore their dosing accuracy. This CCEI startup kit brings together the five essential parts for maintaining the Microdos pump integrated into the brand's regulators and automatic treatment systems. With a single purchase, you have everything you need to recalibrate your probes, replace mechanical wear parts, and secure the injection circuit before treatment resumes.\u003c\/p\u003e\n\n\u003ch2\u003eWhat does the kit contain and what is the purpose of each component?\u003c\/h2\u003e\n\n\u003cp\u003eThe kit consists of a replacement Santoprene tube, a roller with its support (CCEI reference MPTE0310), a complete injection kit, a pH 7 calibration buffer solution, and an H₂O probe cleaning solution. The Santoprene tube is the key component of the peristaltic mechanism: it is compressed and released alternately by the roller, drawing in and then discharging the corrective product into the hydraulic circuit. After a full season of mechanical compression and contact with acidic or basic chemicals, this thermoplastic elastomer loses elasticity and can lead to irregular dosing, or even a leak. The roller and its support ensure uniform pressure on the tube: their simultaneous replacement guarantees a new roller-tube coupling and therefore optimal mechanical operation from restart.\u003c\/p\u003e\n\n\u003cp\u003eThe injection kit allows for the renewal of the entire connection system between the corrective product container and the pool piping. The pH 7 buffer solution, essential for pH probe calibration, ensures that the initial measurement is reliable before any automatic regulation. Finally, the H₂O cleaning solution removes limescale deposits and chemical residues accumulated on the probe during winterization, which improves the sensor's responsiveness and lifespan.\u003c\/p\u003e\n\n\u003ch2\u003eWhich CCEI devices is this kit compatible with?\u003c\/h2\u003e\n\n\u003cp\u003eThis startup kit is designed for CCEI devices incorporating a Microdos MP1 peristaltic dosing pump. This includes the Phileo and Phileo VP pH regulators, the Limpido treatment system (all versions), the OXEO electrolyzer-regulator, and the Daisy regulator. If your CCEI device is equipped with a Microdos pump, recognizable by its compact peristaltic head, this kit is suitable for it. However, it is not suitable for dosing pumps from other manufacturers or for CCEI models that do not incorporate the Microdos mechanism.\u003c\/p\u003e\n\n\u003ch2\u003eWhen and how often should these parts be replaced?\u003c\/h2\u003e\n\n\u003cp\u003eCCEI recommends replacing the Santoprene tube and roller at each restart after winterization, i.e., once a year. The tube is subjected to permanent compression and contact with corrosive products (pH-, pH+, liquid chlorine): even if it does not show any visible cracks, its progressive deformation reduces dosing accuracy. pH probe calibration with the buffer solution should also be carried out at each restart, and ideally a second time in mid-season if swimming conditions are intensive. Probe cleaning follows the same schedule. These simple steps help prevent overdosing or underdosing of treatment products, two situations that degrade water quality and can damage the pool liner or irritate swimmers' skin.\u003c\/p\u003e\n\n\u003ch2\u003eHow to install the kit: an operation accessible to everyone\u003c\/h2\u003e\n\n\u003cp\u003eReplacing the parts requires no specific tools and takes only a few minutes. Start by cutting off the power to the device and draining the chemical product circuit. Open the peristaltic head cover, remove the old Santoprene tube by releasing its ends from the input and output connectors, then insert the new tube, ensuring that the ends are correctly locked. Replace the roller and its support, then close the cover. Connect the new injection kit between the corrective product container and the injection point on the piping. Finally, clean the probe with the supplied H₂O solution, proceed with calibration by immersing the probe in the pH 7 buffer solution, and launch the calibration from your device's menu. A manual dosing cycle will allow you to verify that everything is working correctly before switching back to automatic mode.\u003c\/p\u003e\n\n\u003ch2\u003eMicrodos startup kit vs purchasing separate parts\u003c\/h2\u003e\n\n\u003cp\u003ePurchasing the five components separately is possible, but the kit offers economic and practical advantages. You are guaranteed to have genuine CCEI parts that are perfectly compatible with each other, without the risk of forgetting an item when putting the system back into service. In addition, grouping wear parts in a single shipment simplifies the management of your maintenance stock and reduces delivery costs. It's the most direct solution for approaching the season with peace of mind, with a calibrated and reliable regulation system from the first day of filtration.\u003c\/p\u003e\n\n\u003ch2\u003eWhy is annual dosing pump maintenance so important?\u003c\/h2\u003e\n\n\u003cp\u003eThe dosing pump is the executive arm of your pH regulator or automatic treatment system. If it injects inaccurately, the entire regulation chain is distorted: the probe measures, the device calculates, but the volume of product actually injected no longer corresponds to the setpoint. This results in pH fluctuations, cloudy or irritating water, overconsumption of chemicals, and ultimately, premature wear of the electrolyzer cell or the pool liner. By investing a few minutes and a startup kit at the beginning of each season, you preserve the performance of your entire CCEI installation and optimize your consumption of treatment products throughout the summer.\u003c\/p\u003e\n\u003ch2\u003eThis startup kit includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 MICRODOS roller and support\u003c\/li\u003e\n\u003cli\u003e1 injection kit for dosing pump\u003c\/li\u003e\n\u003cli\u003e1 Santoprene tube for MICRODOS pump\u003c\/li\u003e\n\u003cli\u003e1 pH 7 calibration buffer solution\u003c\/li\u003e\n\u003cli\u003e1 H₂O probe cleaning solution\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139890999633,"sku":"PPNT0008","price":69.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Kit_pour_remise_en_route_traitement_piscine__53536.1743431199.1280.1280.png?v=1760745046","url":"https:\/\/www.poolplanet.com\/en\/products\/kit-de-remise-en-route-traitement-piscine","provider":"Pool Planet","version":"1.0","type":"link"}