copy of RC control module - CCEI - Floodlights remote monitoring

avis sur ce produit
VOIR LES AVIS

RC control module without panel to integrate in power panel on DIN rail. To floodlights radio remote monitoring, to be supplied with remote control. This system of trasmitter and receiver 433MHz can control up to 19 bulbs of 63W. This control panel is assembled in series on connection of bulbs/floodlights.

€40.00
Quantity
Last items in stock

100% secure payments
PFRD0138
Quantity 4

Color change by remote control.

The Remote Color (RC) system lets you choose remotely the color of LED BRiO pool lights with a radio remote control and a controller transmitting information. This method requires no special wiring and can control lights located several meters away. 

 

Simple and original device 

Color change are controlled remotely by combining power interruptions. Controller is placed in series on primary parts of floodlights power supply unit and may control a large number of floodlights (up to 1000W). RC control module is designed to be connected from TBTS 230V/12V transformer produced for subaquatic floodlight lighting and to install in stand-alone panel or inside of pool power panel.

Single central lighting controller

Radio remote control allows to control instantly trasnmitting instructions from controller to floodlights. BRiO floodlights interpret power cut and execute at the same time color change or requested sequences. With no special wiring, floodlights receive simultaneously the same instructions and are synchronised.

 

Stable and reliable transmission

This patented process has an advantage of floodlights remote monitoring located several meters away. Whatever your configuration, touche area is optimal due to the movable antenna.

{
PFRD0138
}

Data sheet

Conception:
CCEI
Power supply:
Mono 230V~/50 Hz

Specific References

Data sheet

  • Conception:

    CCEI

  • Power supply:

    Mono 230V~/50 Hz

Avis clients

En savoir plus

Color change by remote control.

The Remote Color (RC) system lets you choose remotely the color of LED BRiO pool lights with a radio remote control and a controller transmitting information. This method requires no special wiring and can control lights located several meters away. 

 

Simple and original device 

Color change are controlled remotely by combining power interruptions. Controller is placed in series on primary parts of floodlights power supply unit and may control a large number of floodlights (up to 1000W). RC control module is designed to be connected from TBTS 230V/12V transformer produced for subaquatic floodlight lighting and to install in stand-alone panel or inside of pool power panel.

Single central lighting controller

Radio remote control allows to control instantly trasnmitting instructions from controller to floodlights. BRiO floodlights interpret power cut and execute at the same time color change or requested sequences. With no special wiring, floodlights receive simultaneously the same instructions and are synchronised.

 

Stable and reliable transmission

This patented process has an advantage of floodlights remote monitoring located several meters away. Whatever your configuration, touche area is optimal due to the movable antenna.