+33(0)4 83 43 08 40
Available in 3kW, 6kW and 9kW version, the RTi-C pool titanium electric heater is particularly adapted to heat large pools.
En savoir plus
Selectionner une variante ci dessous
The RTi-C electric pool heater can be installed on the pools up to 80M³ to obtain comfortable temperatures, before and after the season. Thanks to mechanic thermostat, easily adjust the pool temperature. The RTi-C electric heater for pool is installed directly on pipeline by maximum saving the space of your technical room. The heater is shipped with all necessary accessories to install (fittings to glue, 63/50 reduction), fixing system. The RTI-C heater is compatible with all conventional equipments of filtration: sand filtration, filter cartridge, filtering through diatoms. The BLUE TITANIUM electric heaters are delivered with the titanium heat rods contributing optimal resistance to corrosion. The heaters must be always installed before the water treatment devices.
The RTI-C heaters are equipped with programming timer clock. During the phase when the water temperature is rising, it is strictly recommended to use the heater in manual mode (timer by-pass). However, the timer has its interest if the temperature rising is finished and the heater is used only to maintain the water temperature during fixed term of the day (example: between 14h and 18h). Indeed, the thermic loss is lower when the water temperature goes down. Therefore, it is interesting to fall again water temperature during non-using phase (example: the night) and prevue the necessary time to heat before the phase of use. With timer clock you can to cut out the heating time and therefore you have saving on heating time. Timer clock use depends on everyone's needs; this one has to be programmed from case to case.
Thanks to thermoregulation, the heater is activated when the water goes under setpoint temperature.
Notice Technique RTI-C fr
Notice Technique RTI-C ES
Notice Technique RTI-C NL