{"title":"Pool water treatment spare parts","description":"\u003cp id=\"isPasted\" data-start=\"353\" data-end=\"772\"\u003eWhen we talk about maintaining your pool water, we often think of chemicals or cleaning robots. But another very important point is the condition of your equipment's spare parts. For everything to work well, each part must be in good condition. Otherwise, \u003ca href=\"https:\/\/www.poolplanet.com\/collections\/traitement\"\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cstrong\u003epool water treatment\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e becomes less effective, and swimming can become less pleasant, or even a safety risk.\u003c\/p\u003e\n\u003cp data-start=\"353\" data-end=\"772\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"774\" data-end=\"816\"\u003eWhy change spare parts?\u003c\/h2\u003e\n\u003cp data-start=\"818\" data-end=\"1140\"\u003eOver time, some parts wear out, clog, or break. It is therefore useful to check them regularly. It is also advisable to replace them before a real problem occurs. Good maintenance helps maintain water quality, equipment performance, and the lifespan of the entire system.\u003c\/p\u003e\n\u003cp data-start=\"1142\" data-end=\"1487\"\u003eThere is a wide range of spare parts for water treatment systems. You can choose from hundreds of references, according to your needs. Whether it's a SANTOPRENE tube, an electrolyzer cell, or a probe, everything is available online, just a click away.\u003c\/p\u003e\n\u003cp data-start=\"1142\" data-end=\"1487\"\u003e \u003c\/p\u003e\n\u003ch2\u003eHow to maintain my pool?\u003c\/h2\u003e\n\u003cp id=\"isPasted\" data-start=\"324\" data-end=\"745\"\u003eTo have clean and pleasant water, you need to clean your pool thoroughly. Pool water must remain clear, without algae or dirt. To do this, you need to monitor the pH, chlorine level, and the proper functioning of the treatment equipment. Good maintenance begins with regular water checks. It is important to test the water at least once a week with strips or an electronic tester.\u003c\/p\u003e\n\u003cp data-start=\"747\" data-end=\"992\"\u003eNext, clean the walls and bottom with a brush and a leaf skimmer or a pool robot. Leaves, insects, or dust should be removed with a skimmer net. If the pool is covered, this helps keep the water clean longer.\u003c\/p\u003e\n\u003cp data-start=\"994\" data-end=\"1223\"\u003eThe filter must also be cleaned regularly. A dirty filter can no longer do its job well. This can make the water cloudy or dirty. It is therefore advisable to rinse the filter at least once a week, especially in summer.\u003c\/p\u003e\n\u003cp data-start=\"1225\" data-end=\"1499\"\u003eWater treatment devices such as electrolyzers, pH regulators, or dosing pumps must be checked frequently. They ensure that the water remains healthy. In case of a breakdown, it is possible to replace defective parts rather than the entire device.\u003c\/p\u003e\n\u003cp data-start=\"1225\" data-end=\"1499\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"1617\" data-end=\"1670\"\u003eWhat spare parts for pool treatment?\u003c\/h2\u003e\n\u003cp data-start=\"1672\" data-end=\"1904\"\u003ePool spare parts are very useful but also sensitive for keeping treatment devices in good condition. Over time, some elements wear out or break down. It is often more economical to buy the necessary spare parts than a whole new device.\u003c\/p\u003e\n\u003cp data-start=\"1906\" data-end=\"1954\"\u003eAmong the most requested pool spare parts are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1958\" data-end=\"2024\"\u003epH or Redox probes: they measure water quality. \u003c\/li\u003e\n\u003cli data-start=\"1958\" data-end=\"2024\"\u003eElectrolysis cells for salt electrolyzers.\u003c\/li\u003e\n\u003cli data-start=\"1958\" data-end=\"2024\"\u003eTubes and rollers for dosing pumps: to effectively inject products into the water.\u003c\/li\u003e\n\u003cli data-start=\"1958\" data-end=\"2024\"\u003eMembranes, seals, and valves for dosing pumps.\u003c\/li\u003e\n\u003cli data-start=\"1958\" data-end=\"2024\"\u003eElectronic boards, transformers, or electrolysis box connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2354\" data-end=\"2494\"\u003eEach brand may have its own compatible pool spare parts.\u003c\/p\u003e\n\u003cp data-start=\"2496\" data-end=\"2751\"\u003eChanging a spare part is often simple. Just follow the manufacturer's instructions. For probes, for example, just unscrew the old one and screw in the new one. For an electrolysis cell, compatibility must be carefully checked.\u003c\/p\u003e\n\u003cp data-start=\"2753\" data-end=\"2897\"\u003eSpare parts extend the life of equipment and keep pool water clean, without having to buy different new pool equipment.\u003c\/p\u003e\n\u003cp data-start=\"2753\" data-end=\"2897\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"2899\" data-end=\"2938\"\u003eWhat water treatment system?\u003c\/h2\u003e\n\u003cp data-start=\"2940\" data-end=\"3112\"\u003eThere are several systems for treating pool water. Each system has its advantages. The choice depends on the type of pool, budget, and maintenance preferences.\u003c\/p\u003e\n\u003ch3 data-start=\"3114\" data-end=\"3141\"\u003e1. Salt electrolysis\u003c\/h3\u003e\n\u003cp data-start=\"3143\" data-end=\"3441\"\u003eThe salt electrolyzer converts the salt present in the pool into natural chlorine. It is an automatic and ecological treatment. The water is softer on the skin. The electrolyzer must be well maintained, especially the cell, which can become scaled.\u003c\/p\u003e\n\u003ch3 data-start=\"3443\" data-end=\"3473\"\u003e2. Chlorine treatment\u003c\/h3\u003e\n\u003cp data-start=\"3475\" data-end=\"3739\"\u003eThis is the most well-known system. It can be manual, with tablets, or automatic with a dosing pump. It kills bacteria and keeps the water clear. A dosing pump can break down, but parts like the injection kit or the SANTOPRENE tube can be replaced.\u003c\/p\u003e\n\u003ch3 data-start=\"3741\" data-end=\"3770\"\u003e3. Bromine treatment\u003c\/h3\u003e\n\u003cp data-start=\"3772\" data-end=\"4002\"\u003eBromine is an alternative to chlorine. It is gentler and more heat resistant. It is often used in spas.\u003c\/p\u003e\n\u003ch3 data-start=\"4004\" data-end=\"4031\"\u003e4. UV treatment\u003c\/h3\u003e\n\u003cp data-start=\"4033\" data-end=\"4230\"\u003eWater passes through a tube with a UV lamp that destroys microbes. This system is effective and chemical-free. The UV lamp must be changed once a year to maintain good performance.\u003c\/p\u003e\n\u003ch3 data-start=\"4459\" data-end=\"4506\"\u003e5. Automatic regulation treatment\u003c\/h3\u003e\n\u003cp data-start=\"4508\" data-end=\"4753\"\u003eThese devices measure and adjust pH, chlorine, or Redox. They keep the water perfect effortlessly. If a device stops working properly, it is possible to change the probes, pumps, or electronic board.\u003c\/p\u003e\n\u003cp data-start=\"4508\" data-end=\"4753\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"4755\" data-end=\"4810\"\u003eWhat accessories for pool treatment?\u003c\/h2\u003e\n\u003cp data-start=\"4812\" data-end=\"4932\"\u003eIn addition to the devices, there are many accessories to improve water treatment and facilitate maintenance.\u003c\/p\u003e\n\u003ch3 data-start=\"4934\" data-end=\"4956\"\u003eWater testers\u003c\/h3\u003e\n\u003cp data-start=\"4958\" data-end=\"5188\"\u003eThey quickly tell you the water quality. There are manual testers with strips or very precise electronic testers. They are essential for knowing when to add a product or adjust a device. Remember to calibrate them well with buffer solutions.\u003c\/p\u003e\n\u003ch3 data-start=\"5190\" data-end=\"5215\"\u003epH regulators\u003c\/h3\u003e\n\u003cp data-start=\"5217\" data-end=\"5475\"\u003eThey automatically maintain a good pH. The water should be neither too acidic nor too basic. Incorrect pH can damage equipment and make treatment ineffective. Regulators have replaceable parts such as probes and dosing pumps.\u003c\/p\u003e\n\u003ch3 data-start=\"5477\" data-end=\"5505\"\u003eControl boxes\u003c\/h3\u003e\n\u003cp data-start=\"5507\" data-end=\"5705\"\u003eThey allow you to program and manage several functions: filtration system, treatment, lighting. If a button no longer responds or a screen is broken, it is possible to change only the part.\u003c\/p\u003e\n\u003ch3 data-start=\"5707\" data-end=\"5737\"\u003eInjectors and strainers\u003c\/h3\u003e\n\u003cp data-start=\"5739\" data-end=\"5955\"\u003eThese are discreet but important elements. They ensure that products are well mixed in the water. Over time, they can become clogged. It is recommended to clean or replace them each season.\u003c\/p\u003e\n\u003ch3 data-start=\"5957\" data-end=\"5983\"\u003eValves and fittings\u003c\/h3\u003e\n\u003cp data-start=\"5985\" data-end=\"6205\"\u003eThey serve to direct water to the correct equipment. A leaking valve or a cracked fitting can cause pressure drops or water waste.\u003c\/p\u003e\n\u003ch3 data-start=\"6207\" data-end=\"6247\"\u003eSmart sensors and probes\u003c\/h3\u003e\n\u003cp data-start=\"6249\" data-end=\"6508\"\u003eSome accessories are connected and allow you to monitor the pool from a smartphone. They send alerts if the chlorine or pH level is not good. If a sensor no longer works, you can buy just the sensor and not the whole system.\u003c\/p\u003e\n\u003cp data-start=\"6249\" data-end=\"6508\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"6510\" data-end=\"6567\"\u003eHow to repair a pool treatment device?\u003c\/h2\u003e\n\u003cp data-start=\"6569\" data-end=\"6769\"\u003eWhen a treatment device breaks down, you don't always have to replace it. Often, a simple part is enough to get it working again. Here are the steps to follow for a simple repair:\u003c\/p\u003e\n\u003ch3 data-start=\"6774\" data-end=\"6946\"\u003eIdentify the problem\u003cbr data-start=\"6800\" data-end=\"6803\"\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"6774\" data-end=\"6946\"\u003eIs it a probe problem, flow, pressure, or an electrical fault? Device manuals can help understand the error.\u003c\/p\u003e\n\u003ch3 data-start=\"6951\" data-end=\"7108\"\u003eCheck connections\u003c\/h3\u003e\n\u003cp data-start=\"6951\" data-end=\"7108\"\u003eSometimes, a simple poorly connected cable or an oxidized plug can be the cause. In this case, simply clean or reconnect.\u003c\/p\u003e\n\u003ch3 data-start=\"7113\" data-end=\"7277\"\u003eTest components one by one\u003c\/h3\u003e\n\u003cp data-start=\"7113\" data-end=\"7277\"\u003eIt is possible to test a probe, pump, or board with a multimeter. This helps identify which part to change.\u003c\/p\u003e\n\u003ch3 data-start=\"7481\" data-end=\"7675\"\u003eReplace the part\u003c\/h3\u003e\n\u003cp data-start=\"7481\" data-end=\"7675\"\u003eYou must cut the power and follow the manufacturer's steps. Most parts are plug-and-play: simply disconnect the old one and connect the new one.\u003c\/p\u003e\n\u003ch3 data-start=\"7680\" data-end=\"7905\"\u003ePerform a functional test\u003c\/h3\u003e\n\u003cp data-start=\"7680\" data-end=\"7905\"\u003eOnce the part is changed, turn on the device and check that it works well. Water should circulate normally, indicator lights should be green, and measurements should be correct.\u003c\/p\u003e\n\u003cp data-start=\"7907\" data-end=\"8119\"\u003eRepairing a device yourself saves money and extends the life of the equipment. It also avoids interrupting water treatment for too long, which could cause the water to turn.\u003c\/p\u003e\n\u003cp data-start=\"7907\" data-end=\"8119\"\u003e \u003c\/p\u003e\n\u003ch2 id=\"isPasted\" data-start=\"2246\" data-end=\"2303\"\u003eSkimmer and accessories: small parts, big effects\u003c\/h2\u003e\n\u003cp data-start=\"2305\" data-end=\"2517\"\u003eThe \u003cstrong data-start=\"2308\" data-end=\"2319\"\u003eskimmer\u003c\/strong\u003e is an opening on the surface of the pool that catches leaves and dirt. If the skimmer basket is broken or the flap no longer returns, this can prevent proper cleaning.\u003c\/p\u003e\n\u003cp data-start=\"2755\" data-end=\"2970\"\u003eEvery accessory is very important. A small damaged part can hinder the proper functioning of the whole system. It is therefore better to have a repair kit available to react quickly in case of a problem.\u003c\/p\u003e\n\u003cp data-start=\"2755\" data-end=\"2970\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"2972\" data-end=\"3017\"\u003eTechnology adapted to all levels\u003c\/h2\u003e\n\u003cp data-start=\"3019\" data-end=\"3314\"\u003eWhether you are an individual or a professional, it is important to make the right choice based on your installation. Some water treatment equipment uses electronic probes, others cartridges or injectors. Each system has its own spare parts.\u003c\/p\u003e\n\u003cp data-start=\"3316\" data-end=\"3594\"\u003eNew technologies make devices more precise and simpler to use, but also more sensitive. A simple sensor failure can prevent proper water treatment. Fortunately, it is possible to order the exact part without changing the entire device.\u003c\/p\u003e\n\u003cp data-start=\"3316\" data-end=\"3594\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"3803\" data-end=\"3849\"\u003eAn online site, a team at your service\u003c\/h2\u003e\n\u003cp data-start=\"3851\" data-end=\"4100\"\u003eBuying a spare part can seem complicated. But with a clear and well-organized online store, it becomes very practical. You can compare products, read customer reviews, and make your selection with confidence.\u003c\/p\u003e\n\u003cp data-start=\"4102\" data-end=\"4344\"\u003eIf you have any doubts, you can contact customer service by email. They are there to help you identify the right part, understand how to install it, or answer all your questions. Your satisfaction is their priority.\u003c\/p\u003e\n\u003cp data-start=\"4102\" data-end=\"4344\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"4346\" data-end=\"4397\"\u003eDurable products for long-term use\u003c\/h2\u003e\n\u003cp data-start=\"4399\" data-end=\"4629\"\u003eInvesting in good spare parts allows for long-term maintenance. This prevents repeated breakdowns and extends the life of your equipment. It is a smart choice, both economical and ecological.\u003c\/p\u003e\n\u003cp data-start=\"4631\" data-end=\"4951\"\u003eThe replacement parts offered are tested to guarantee their reliability. They are designed to withstand treatment products, heat, and humidity.\u003c\/p\u003e\n\u003cp data-start=\"4631\" data-end=\"4951\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"4953\" data-end=\"4994\"\u003eComprehensive coverage of your needs\u003c\/h2\u003e\n\u003cp data-start=\"4996\" data-end=\"5284\"\u003eOn our site, you have access to a complete range to cover all aspects of water treatment: filtration, dosing, analysis, circulation, safety. You will also find accessories to protect your pool, such as tarpaulins, covers, and plugs.\u003c\/p\u003e\n\u003cp data-start=\"5286\" data-end=\"5492\"\u003eChanging a part should not be a headache. Thanks to a wide choice, well-presented products, and efficient customer assistance, maintaining your pool becomes simpler and safer.\u003c\/p\u003e","products":[{"product_id":"antenne-deportee-bluetooth","title":"Bluetooth® Remote Antenna","description":"\u003cp data-start=\"285\" data-end=\"624\"\u003eThe \u003cstrong data-start=\"287\" data-end=\"338\"\u003eCCEI Bluetooth Remote Antenna (ref. PF10R08G)\u003c\/strong\u003e is an essential accessory for improving the connectivity of your compatible pool devices. Thanks to its \u003cstrong data-start=\"458\" data-end=\"480\"\u003ecompact and waterproof\u003c\/strong\u003e design, it is easily installed at the exit of your technical room, ensuring \u003cstrong data-start=\"564\" data-end=\"593\"\u003eoptimal Bluetooth range\u003c\/strong\u003e near your pool.\u003c\/p\u003e\n\u003ch2 data-start=\"626\" data-end=\"677\"\u003e\u003cstrong data-start=\"630\" data-end=\"675\"\u003eAdvantages of the CCEI Bluetooth antenna\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"678\" data-end=\"1076\"\u003e✅ \u003cstrong data-start=\"680\" data-end=\"706\"\u003eImproved signal\u003c\/strong\u003e: Enables seamless communication between your equipment and your mobile app.\u003cbr data-start=\"791\" data-end=\"794\"\u003e✅ \u003cstrong data-start=\"796\" data-end=\"829\"\u003eQuick and easy installation\u003c\/strong\u003e: Easily attaches outdoors for maximum reception.\u003cbr data-start=\"892\" data-end=\"895\"\u003e✅ \u003cstrong data-start=\"897\" data-end=\"920\"\u003eGuaranteed waterproofing\u003c\/strong\u003e: Robust design for use in humid environments.\u003cbr data-start=\"987\" data-end=\"990\"\u003e✅ \u003cstrong data-start=\"992\" data-end=\"1017\"\u003eBroad compatibility\u003c\/strong\u003e: Works with several CCEI brand devices.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139505090897,"sku":"PF10R08G","price":102.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4898-11978-0-antenne-deportee-bluetooth-ccei__01747__20086.1741609630.1280.1280.png?v=1760739452"},{"product_id":"bouchon-de-nettoyage-cellule-ccei","title":"Cleaning Cap for CCEI Pool Electrolyzer Cell – Limpido, Zélia, X-Cell","description":"\u003ch2\u003eCCEI Cleaning Plug: The essential accessory for maintaining your pool electrolyzer cell\u003c\/h2\u003e\n\u003cp\u003eThe CCEI cleaning plug (ref. PF10I190) is a simple but essential accessory for any pool owner equipped with a CCEI salt chlorinator. It allows you to descale your electrolysis cell in a vertical position, without complex disassembly and without losing any cleaning product. Supplied with its sealing gasket, it ensures clean and leak-free cleaning.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eWhat is the cell cleaning plug used for?\u003c\/h2\u003e\n\u003cp\u003eOver the months, limescale builds up on the titanium plates of your electrolyzer cell. This scale gradually reduces the efficiency of chlorine production and can eventually damage the electrodes. The CCEI cleaning plug allows you to soak the plates in a descaling solution directly inside the cell: you screw the plug onto one end, hold the cell vertically, and pour the cleaning product until the plates are completely covered. No need for an external basin or container.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eCompatible with all CCEI cells with 50 mm connection\u003c\/h2\u003e\n\u003cp\u003eThe PF10I190 plug is compatible with all CCEI electrolyzer cells equipped with a 50 mm diameter connection. This includes the Limpido, Limpido Z, Zélia (references ZLC, ZLT and ZLA) ranges, as well as X-Cell cells. Before ordering, simply check that your cell has a 50 mm connection — this is the case for the vast majority of CCEI cells in circulation.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eHow to clean your electrolyzer cell with the CCEI plug?\u003c\/h2\u003e\n\u003cp\u003eCleaning your cell is a simple operation that requires no special tools. First, disassemble the cell from your hydraulic circuit by unscrewing the union fittings. Then, screw the cleaning plug onto one of the ends, making sure to position the supplied sealing gasket correctly. Place the cell vertically, plug facing down, then fill it with a 10% diluted hydrochloric acid solution or household white vinegar. Leave to act until the limescale deposits completely disappear (from a few minutes to several hours depending on the level of scaling). Rinse thoroughly with clear water before reassembling the cell on the circuit.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eHow often should you descale your cell?\u003c\/h2\u003e\n\u003cp\u003eThe cleaning frequency depends on the hardness of your water. As a general rule, descaling 1 to 2 times a year is recommended by CCEI. The ideal time is before winterizing the pool and when restarting in the spring. CCEI electrolyzers like the Limpido have a self-cleaning system with polarity inversion that limits daily scaling, but this function does not exempt from periodic manual cleaning with descaler to remove the most stubborn deposits.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eWhy maintaining your cell extends its lifespan\u003c\/h2\u003e\n\u003cp\u003eThe electrodes of your cell are made of titanium plates treated with ruthenium oxide, an expensive coating that wears out gradually. Excessive scaling forces the cell to work harder to produce the same amount of chlorine, accelerating the wear of the coating and reducing the lifespan of the plates. Regular cleaning with the CCEI plug helps maintain optimal chlorine production and preserve your electrodes for as long as possible. It is a minimal investment to protect a component that represents the most expensive part of your electrolysis system.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139506303313,"sku":"PF10I190","price":22.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4903-11995-0-bouchon-nettoyage-cellule-electrolyseur-ccei-face__43710__74755.1741076877.1280.1280.png?v=1760739544"},{"product_id":"carte-electronique-phileo-phileo-lt","title":"Phileo - Phileo LT electronic board","description":"\u003cp\u003e\u003cspan\u003eReplacement electronic board for your CCEI Phileo LT.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e? To check compatibility with your device, contact our customer service department, providing us with the serial number of your Phileo pH regulator.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139509481809,"sku":"SF110039","price":168.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4909-12608-0-carte_lectrique_Phileo_LT_dessus__57183__91087.1741941001.1280.1280.png?v=1760739624"},{"product_id":"carte-electronique-regulateur-de-niveau-niva-5-et-niva-3-avant-07-2019","title":"Niva 5 and Niva 3 electronic level regulator board pre-07\/2019","description":"\u003cp\u003e\u003cspan\u003eElectronic board for the CCEI Niva 5 level regulator.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139509580113,"sku":"SF110087","price":195.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4910-12005-0-carte-eletronique-regulateur-niveau-niva-avant-2019-ccei__49513__44364.1741076890.1280.1280.png?v=1760739641"},{"product_id":"chambre-de-mesure-et-dinjection-separees-zelia-pod-ccei","title":"Separate measuring and injection chamber - Zelia Pod - CCEI","description":"\u003ch2\u003eSimplify your installation with the Zelia Pod,\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eThe CCEI ZeliaPod will provide your plant room with a truly compact measurement chamber, while minimizing the available space required by automation and water treatment equipment.\u003c\/p\u003e\n\u003cp\u003eThe ZeliaPod only needs 185 mm on your piping and can group \u003ca href=\"..\/..\/..\/..\/fr\/sondes-et-accessoires-de-traitement\/109-detecteur-de-debit-noryl-3701033300873.html\" target=\"_blank\" rel=\"noreferrer noopener\"\u003ea NORYL flow detector\u003c\/a\u003e typically used by your chlorinator or regulator, a \u003ca href=\"..\/..\/..\/..\/fr\/sondes-et-accessoires-de-traitement\/78-sonde-ph-cable-connexion-piscine-regulateur-electrolyseur-3701033300699.html\" target=\"_blank\" rel=\"noreferrer noopener\"\u003epH probe\u003c\/a\u003e and \u003ca href=\"..\/..\/..\/..\/fr\/sondes-et-accessoires-de-traitement\/79-sonde-redox-piscine-regulateur-electrolyseur--3701033300705.html\" target=\"_blank\" rel=\"noreferrer noopener\"\u003eORP REDOX probe\u003c\/a\u003e, and two injectors (pH, ORP, chlorine, active oxygen) necessary for regulating your water, plus a Pool-Earth.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/chambre-de-mesure-et-d-injection-s-par-es-zelia-pod-ccei.png\" alt=\"Zelia POD Probe, injector and flow detector\" width=\"1000\" height=\"291\"\u003e\u003c\/p\u003e\n\u003ch2\u003eControlled water analysis with the CCEI Zelia Pod\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eWhen you want to check the condition of the probes, flow detectors, and injectors, you will no longer need to check your entire pipeline. The CCEI ZeliaPod brings all these different pieces of equipment together at one easily removable point.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe integrated pool earth protects the measurements taken by your probes. Its purpose is to discharge undesirable currents present in the water, such as static current, household fault current, and swimming pool equipment current.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThese various currents are not dangerous, but they are an aggravating factor for corrosion and disturb the probes of the treatment devices, which often results in excessive injections of chemicals into your pool water.\u003c\/p\u003e\n\u003ch2\u003eCompatibility of the CCEI Zelia Pod measurement chamber\u003c\/h2\u003e\n\u003cp class=\"p1\"\u003eThis measurement chamber allows for a multitude of compatibilities; you can gather all the measurement and treatment correction elements such as electrolysis and regulation. You can also regulate pH and\/or ORP simultaneously.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eIf desired, it will be possible to inject an oxidant such as liquid chlorine or active oxygen, essential for your UV treatment.\u003c\/p\u003e\n\u003ch2\u003eCCEI Zelia POD Connection\u003c\/h2\u003e\n\u003cp\u003eThis measurement chamber only needs 185 mm in length and 65 mm in height. The connection to your piping will be Ø 50 mm.\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/d-tail-de-la-chambre-de-mesure-et-d-injection-s-par-es-zelia-pod-ccei.png\" alt=\"Zelia Pod dimensions\" width=\"1000\" height=\"460\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/installation-phenixzelia-pod-web-hd-fil.jpg\" alt=\"Zelia POD installation example\" width=\"1024\" height=\"477\"\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139570626897,"sku":"PF10J022","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4927-12054-0-chambre-mesure-injection-zeliapod-zelia-pod-ccei__69474__63606.1741076924.1280.1280.png?v=1760739978"},{"product_id":"collier-de-prise-en-charge-50-pour-sonde-de-temperature","title":"50\" temperature probe saddle clamp","description":"\u003cp data-start=\"211\" data-end=\"604\"\u003eThe \u003cstrong data-start=\"214\" data-end=\"293\"\u003e50mm clamp for CCEI temperature probe\u003c\/strong\u003e is a practical and efficient solution for \u003cstrong data-start=\"337\" data-end=\"407\"\u003einstalling a temperature probe on your filtration system\u003c\/strong\u003e. Designed to be \u003cstrong data-start=\"425\" data-end=\"476\"\u003emounted directly on a 50mm pipe\u003c\/strong\u003e, this clamp allows for \u003cstrong data-start=\"500\" data-end=\"535\"\u003equick and secure integration\u003c\/strong\u003e without requiring complex modifications to the hydraulic circuit.\u003c\/p\u003e\n\u003cp data-start=\"606\" data-end=\"799\"\u003eThanks to this device, the temperature probe can accurately measure the \u003cstrong data-start=\"678\" data-end=\"719\"\u003etemperature of your pool water\u003c\/strong\u003e and transmit this information to your regulation or display system.\u003c\/p\u003e\n\u003ch3 data-start=\"801\" data-end=\"859\"\u003e\u003cstrong data-start=\"805\" data-end=\"857\"\u003eAdvantages of the CCEI clamp\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"860\" data-end=\"1382\"\u003e✅ \u003cstrong data-start=\"862\" data-end=\"889\"\u003eSimplified installation\u003c\/strong\u003e: Allows direct integration of a temperature probe onto a 50mm pipe.\u003cbr data-start=\"977\" data-end=\"980\"\u003e✅ \u003cstrong data-start=\"982\" data-end=\"1008\"\u003eCompatibility\u003c\/strong\u003e: Perfect for all standard temperature probes.\u003cbr data-start=\"1067\" data-end=\"1070\"\u003e✅ \u003cstrong data-start=\"1072\" data-end=\"1094\"\u003eSecure fastening\u003c\/strong\u003e: Ensures optimal sealing for accurate temperature readings.\u003cbr data-start=\"1170\" data-end=\"1173\"\u003e✅ \u003cstrong data-start=\"1175\" data-end=\"1199\"\u003eResistant materials\u003c\/strong\u003e: Designed for durable use in pool filtration systems.\u003cbr data-start=\"1280\" data-end=\"1283\"\u003e✅ \u003cstrong data-start=\"1285\" data-end=\"1316\"\u003eNo major modifications\u003c\/strong\u003e: Avoids heavy work on the existing hydraulic circuit.\u003c\/p\u003e\n\u003ch3 data-start=\"1384\" data-end=\"1442\"\u003e\u003cstrong data-start=\"1388\" data-end=\"1440\"\u003eWhy choose this clamp?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"1443\" data-end=\"1780\"\u003eInstalling a temperature probe on a \u003cstrong data-start=\"1492\" data-end=\"1528\"\u003epool filtration circuit\u003c\/strong\u003e can be challenging without a suitable accessory. This \u003cstrong data-start=\"1583\" data-end=\"1619\"\u003e50mm clamp\u003c\/strong\u003e allows for \u003cstrong data-start=\"1631\" data-end=\"1665\"\u003equick and reliable installation\u003c\/strong\u003e, ensuring accurate water temperature measurement without the risk of leaks or system deterioration.\u003c\/p\u003e\n\u003ch3 data-start=\"1782\" data-end=\"1819\"\u003e\u003cstrong data-start=\"1786\" data-end=\"1817\"\u003eTechnical characteristics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1820\" data-end=\"2158\"\u003e\n\u003cli data-start=\"1820\" data-end=\"1841\"\u003e\n\u003cstrong data-start=\"1822\" data-end=\"1832\"\u003eBrand\u003c\/strong\u003e: CCEI\u003c\/li\u003e\n\u003cli data-start=\"1842\" data-end=\"1870\"\u003e\n\u003cstrong data-start=\"1844\" data-end=\"1857\"\u003eReference\u003c\/strong\u003e: MPPV0211\u003c\/li\u003e\n\u003cli data-start=\"1871\" data-end=\"1938\"\u003e\n\u003cstrong data-start=\"1873\" data-end=\"1881\"\u003eType\u003c\/strong\u003e: Clamp for temperature probe\u003c\/li\u003e\n\u003cli data-start=\"1939\" data-end=\"1963\"\u003e\n\u003cstrong data-start=\"1941\" data-end=\"1953\"\u003eDiameter\u003c\/strong\u003e: 50 mm\u003c\/li\u003e\n\u003cli data-start=\"2027\" data-end=\"2099\"\u003e\n\u003cstrong data-start=\"2029\" data-end=\"2041\"\u003eMaterial\u003c\/strong\u003e: Plastic resistant to pool chemicals\u003c\/li\u003e\n\u003cli data-start=\"2100\" data-end=\"2158\"\u003e\n\u003cstrong data-start=\"2102\" data-end=\"2118\"\u003eInstallation\u003c\/strong\u003e: Quick mounting on PVC pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"2160\" data-end=\"2196\"\u003e\u003cstrong data-start=\"2164\" data-end=\"2194\"\u003eFAQ – Frequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3 data-start=\"2197\" data-end=\"2384\"\u003e❓ \u003cem data-start=\"2199\" data-end=\"2252\"\u003eIs this clamp compatible with other probes?\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"2197\" data-end=\"2384\"\u003e✔️ It is compatible with all types of temperature probes\u003c\/p\u003e\n\u003ch3 data-start=\"2386\" data-end=\"2611\"\u003e❓ \u003cem data-start=\"2388\" data-end=\"2439\"\u003eHow do I install this clamp?\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"2386\" data-end=\"2611\"\u003e✔️ Simply \u003cstrong data-start=\"2458\" data-end=\"2508\"\u003eattach the clamp to a 50mm pipe\u003c\/strong\u003e, insert the temperature probe, and tighten correctly to ensure a perfect seal.\u003c\/p\u003e\n\u003ch3 data-start=\"2613\" data-end=\"2878\"\u003e❓ \u003cem data-start=\"2615\" data-end=\"2690\"\u003eIs this clamp suitable for in-ground pool filtration systems?\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003cp data-start=\"2613\" data-end=\"2878\"\u003e✔️ Yes, it is suitable for \u003cstrong data-start=\"2715\" data-end=\"2780\"\u003eall installations using 50mm pipes\u003c\/strong\u003e, whether for in-ground or above-ground pools equipped with a standard filtration system.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139597594961,"sku":"MPPV0211","price":4.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4949-12090-0-collier-prise-en-charge-50-pour-sonde-temperature-ccei-face__60856__67835.1741624120.386.513.png?v=1774201133"},{"product_id":"detecteur-de-debit","title":"Flow sensor","description":"\u003ch2\u003eDimensions of the NORYL flow switch\u003c\/h2\u003e\n\u003cp\u003eNORYL flow switch with a 3\/4 thread and a paddle length of 8 cm.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eCharacteristics of the NORYL flow switch\u003c\/h3\u003e\n\u003cp\u003eThe maximum flow rate must not exceed 22 m³ per hour, and the minimum value is 4 m³\/H, for a pipe diameter of 50 mm.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139609588049,"sku":"MPCP0100","price":79.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/b31cf22f2dd8bd238bac6b6b0d312541.png?v=1780493734"},{"product_id":"detecteur-de-debit-avec-prise-ronde-deux-point","title":"NORYL Flow Detector for Pool – 2-Pin Round Plug (Ø 50 mm)","description":"\u003ch2\u003eCCEI Noryl Flow Switch with 2-Pin Round Plug: Essential Safety for Automatic Treatment Systems\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNoryl flow switch\u003c\/strong\u003e is an essential safety device in any automatic swimming pool water treatment system. It is installed on the return pipe, just before the electrolyzer cell or the pH regulator's analysis chamber, and detects the presence or absence of water circulation in the hydraulic circuit. As soon as the water flow becomes insufficient or stops—for example, when the filtration pump stops, a valve is closed, or a filter is clogged—the detector sends a signal to the control unit to \u003cstrong\u003eimmediately stop chlorine production or chemical injection\u003c\/strong\u003e. This safety feature protects equipment, preserves water quality, and complies with regulatory safety requirements for automated systems.\u003c\/p\u003e\n\n\u003ch2\u003eWhy is a flow switch mandatory on an electrolyzer or pH regulator?\u003c\/h2\u003e\n\n\u003cp\u003eA salt chlorinator produces chlorine by electrolyzing saltwater circulating through its cell. If the water stops flowing while production remains active, chlorine accumulates at an extreme concentration in the cell—which can cause rapid deterioration of the electrodes, or even rupture of the cell itself. Similarly, a pH regulator equipped with a dosing pump injects an acid or basic corrector into the pipe. If injection occurs without water circulation, the concentrated product stagnates in the piping or flows back into the analysis chamber, which can damage the probes and skew readings for several days.\u003c\/p\u003e\n\n\u003cp\u003eThe flow switch prevents these two scenarios by automatically shutting down the device as soon as circulation stops. It is a \u003cstrong\u003epassive safety device\u003c\/strong\u003e that operates without user intervention: as long as water circulates normally, the detector's electrical contact remains closed, allowing the device to operate. As soon as the flow drops below the minimum threshold (4 m³\/h for this model), the contact opens and cuts off power.\u003c\/p\u003e\n\n\u003ch2\u003eCCEI Compatibility: Limpido, Phileo, Oxeo, Phenix, and all regulators with 2-pin plug\u003c\/h2\u003e\n\n\u003cp\u003eThis Noryl flow switch is equipped with a \u003cstrong\u003e2-pin round plug\u003c\/strong\u003e, the standard connection format for CCEI devices. It is compatible with the entire range of CCEI automatic treatment systems, including:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLimpido Electrolyzers\u003c\/strong\u003e (Limpido XC LAB, Limpido Pro pH, Limpido Pro Lab, Limpido LTE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhileo pH Regulators\u003c\/strong\u003e (Phileo, Phileo LT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOxeo pH and ORP Regulators\u003c\/strong\u003e (Oxeo, Oxeo LT, Oxeo SP)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhenix Combined Regulators\u003c\/strong\u003e (pH + ORP + Redox analysis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt connects directly to the control unit via its 2-pin connector. No electronic configuration is necessary: the system automatically recognizes the presence of the flow switch and activates the safety function.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications: Noryl, 3\/4 thread, 7 cm paddle, 4 to 22 m³\/h flow rate\u003c\/h2\u003e\n\n\u003cp\u003eThe body of the detector is made of \u003cstrong\u003eNoryl\u003c\/strong\u003e, an engineered polymer resistant to pool chemicals (chlorine, acid, soda) and UV. This material ensures maximum longevity even in a chemically aggressive environment.\u003c\/p\u003e\n\n\u003cp\u003eConnection is made via a \u003cstrong\u003e3\/4 inch thread\u003c\/strong\u003e. Installation is done on the return pipe using a \u003cstrong\u003eØ 50 mm saddle clamp\u003c\/strong\u003e (not supplied) and a threaded adapter, which allow the detector to be mounted without cutting the pipe. The \u003cstrong\u003edetection paddle is 7 cm long\u003c\/strong\u003e — this is the moving element that pivots under the action of water flow and activates the electrical contact.\u003c\/p\u003e\n\n\u003cp\u003eThe detector operates within a \u003cstrong\u003eflow rate range of 4 to 22 m³\/h\u003c\/strong\u003e. Below 4 m³\/h, the contact opens and stops the connected device. Above 22 m³\/h, the detector remains in the active position but should not be used under these conditions for prolonged periods, as excessive flow can prematurely wear the paddle. These values correspond to standard flow rates for residential filtration pumps, which typically run between 8 and 18 m³\/h.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation: on Ø 50 mm pipe, upstream of the cell or analysis chamber\u003c\/h2\u003e\n\n\u003cp\u003eThe flow switch is mounted \u003cstrong\u003ejust before the electrolyzer cell or the pH regulator's analysis chamber\u003c\/strong\u003e, on the return pipe, after the filter. It must be positioned so that the paddle is free to pivot under the action of the flow — avoid placing it in an elbow or too close to a fitting, and respect the \u003cstrong\u003edirection of water flow\u003c\/strong\u003e indicated by the arrow molded on the detector body.\u003c\/p\u003e\n\n\u003cp\u003eInstallation via a saddle clamp allows for installation without cutting the pipe and without draining the circuit. The clamp is fixed around the Ø 50 mm pipe, then the pipe is drilled through the clamp, and the adapter and then the detector are screwed in. The 2-pin electrical cable is then connected directly to the dedicated socket on the electrolyzer or regulator housing.\u003c\/p\u003e\n\n\u003ch2\u003eWhen is a flow switch absolutely required?\u003c\/h2\u003e\n\n\u003cp\u003eThe use of a flow switch is \u003cstrong\u003emandatory in the following cases\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation with a \u003cstrong\u003evariable speed filtration pump\u003c\/strong\u003e, because the flow rate can vary depending on the program and fall below the electrolyzer's operating threshold without the pump stopping completely.\u003c\/li\u003e\n  \u003cli\u003eInstallation with a \u003cstrong\u003etechnical room located above the pool level\u003c\/strong\u003e, because if the pump stops, water can flow back and cause the circuit to lose prime, leaving the cell or probes dry.\u003c\/li\u003e\n  \u003cli\u003eInstallation with \u003cstrong\u003emulti-way valves or bypasses\u003c\/strong\u003e, which can accidentally cut off or reduce flow to the electrolyzer or regulator without stopping the main pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEven when these situations do not apply, installing a flow switch remains excellent preventive safety practice that protects your equipment investment and prevents costly breakdowns.\u003c\/p\u003e\n\n\u003ch2\u003eDiagnosis and replacement: how to test a faulty flow switch\u003c\/h2\u003e\n\n\u003cp\u003eIf your electrolyzer or regulator displays a flow error or does not start despite the pump running, the flow switch may be the cause. To test its proper functioning, unplug the connector from the housing, set a multimeter to the \"Ohms\" function, then test for continuity between the two pins of the connector with filtration running. If the device indicates \u003cstrong\u003e0 ohm\u003c\/strong\u003e, the detector is working normally. If no value is displayed, the internal contact is faulty and the detector must be replaced.\u003c\/p\u003e\n\n\u003cp\u003eCommon causes of failure include mechanical wear of the paddle (which can get stuck or break after several years), fouling of the mechanism by limescale deposits or algae, or oxidation of electrical contacts in a humid environment. Replacing the flow switch is a simple operation that does not require draining the circuit.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139610669393,"sku":"SF160006","price":96.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4956-12533-3-SF160006__89492__33694.1741076969.1280.1280.png?v=1760806429"},{"product_id":"galet-et-support-microdos","title":"Roller and Support for Microdos Dosing Pump – Pool Spare Part","description":"\u003ch2\u003eRoller and support for Microdos: replacement part for CCEI peristaltic dosing pump\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eroller with its support\u003c\/strong\u003e is one of the essential mechanical parts of the \u003cstrong\u003eMicrodos MP1 peristaltic dosing pump\u003c\/strong\u003e installed on CCEI automatic regulators. In a peristaltic pump, the rollers rotate around a rotor and progressively compress the Santoprene tube against the circular wall of the pump head. This repeated compression pushes the liquid (pH- acid, pH+ soda, hypochlorite) through the tube without the fluid ever coming into contact with the mechanical parts of the pump. The roller is therefore subjected to \u003cstrong\u003epermanent friction\u003c\/strong\u003e against the Santoprene tube, making it a wear part to monitor and replace when it shows signs of degradation.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility: Phileo, Limpido, Oxeo, Phenix, Orpheo, Equalizo\u003c\/h2\u003e\n\n\u003cp\u003eThis replacement roller and support is compatible with all \u003cstrong\u003eCCEI regulators and salt chlorinators\u003c\/strong\u003e equipped with a Microdos MP1 dosing pump, including:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhileo and Phileo LT\u003c\/strong\u003e: automatic pH regulators\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLimpido XC LAB, Limpido Pro pH, Limpido Pro Lab\u003c\/strong\u003e: salt chlorinators with integrated pH regulation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOxeo, Oxeo LT, Oxeo SP\u003c\/strong\u003e: combined pH + ORP regulators\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhenix\u003c\/strong\u003e: advanced pH + ORP regulators with RedOx analysis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrpheo\u003c\/strong\u003e: older generation pH regulators\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEqualizo Duo\u003c\/strong\u003e: dual dosing pH + chlorine regulators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is an original CCEI replacement part, ensuring perfect compatibility and optimal operation of the dosing pump.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to replace the roller of your Microdos pump?\u003c\/h2\u003e\n\n\u003cp\u003eThe roller gradually wears out due to friction against the Santoprene tube. Several signs indicate that it is time to replace it:\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIrregular dosing\u003c\/strong\u003e is often the first symptom: if your regulator shows product injection but the container does not empty, or if the pH takes longer than usual to stabilize, the roller may be worn and no longer effectively compress the tube. An \u003cstrong\u003eabnormal pump noise\u003c\/strong\u003e — clicking, grinding, or vibrating — can also indicate a deformed roller or a cracked support. Upon visual inspection (pump cover open), a worn roller will show \u003cstrong\u003eflats\u003c\/strong\u003e (flat surfaces instead of being cylindrical), cracks, or visible deformation. The support may also show signs of wear or breakage at the mounting pins.\u003c\/p\u003e\n\n\u003cp\u003eUnder normal use, a Microdos roller can last several years. However, certain factors accelerate wear: a too dry Santoprene tube (lack of lubrication), intensive use (frequent dosing in public or collective pools), or a particularly aggressive chemical product.\u003c\/p\u003e\n\n\u003ch2\u003eHow to extend the life of the roller and Santoprene tube?\u003c\/h2\u003e\n\n\u003cp\u003eA simple but effective practice is to \u003cstrong\u003eslightly lubricate the Santoprene tube\u003c\/strong\u003e with petroleum jelly or silicone gel when replacing the roller or tube. This thin layer of lubricant reduces friction between the roller and the tube, delays premature tube rupture, and extends the life of the entire pump. Apply a very small amount of product — too much lubricant could slip into the dosing circuit and interfere with pH measurements.\u003c\/p\u003e\n\n\u003cp\u003eIt is also recommended to regularly check the condition of the Santoprene tube: a hardened, cracked, or chemically crystallized tube should be replaced at the same time as the roller, to start with a new basis and avoid new premature wear.\u003c\/p\u003e\n\n\u003ch2\u003eQuick and easy installation without complex tools\u003c\/h2\u003e\n\n\u003cp\u003eReplacing the roller and its support is an operation accessible to any pool owner. After cutting off the power to the regulator, open the Microdos pump cover, remove the old roller by detaching its axle from the support, then install the new roller, ensuring it rotates freely around its axle. The support clips or screws onto the pump rotor depending on the model. Commissioning is immediate — simply check that the roller correctly compresses the Santoprene tube by manually rotating the rotor before closing the cover.\u003c\/p\u003e\n\n\u003ch2\u003eAn economical part to maintain automatic dosing in good condition\u003c\/h2\u003e\n\n\u003cp\u003eAt less than €20, this replacement roller and support is a \u003cstrong\u003epreventive consumable\u003c\/strong\u003e to have in stock in your technical room. Replacing a worn roller in time avoids more serious malfunctions that could require replacing the entire pump, and ensures precise and constant dosing of your treatment products. It is a minimal investment to keep your automatic regulator in perfect working order for many years.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139618959697,"sku":"MPTE0310","price":18.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4968-12129-0-galet-et-support-microdos-ccei__56660__32174.1741076980.1280.1280.png?v=1760740508"},{"product_id":"kit-dinjection-pour-pompe-doseuse-ccei","title":"Dosing pump injection kit - CCEI","description":"\u003ch4\u003e\u003cstrong\u003eDosing pump injection kit\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis kit is perfectly suited to replace the defective injection kit of your \u003cstrong\u003ePhileo, Oxeo\u003c\/strong\u003e regulator or \u003cstrong\u003eLimpido\u003c\/strong\u003e electrolyser.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe inner diameter of the crystal tube is 5 mm and the outer diameter is 7 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe kit contains:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 strainer\u003c\/li\u003e\n\u003cli\u003e2 m of tubing\u003c\/li\u003e\n\u003cli\u003e1 injection lance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139624595793,"sku":"MPTE0214+","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Kit_d_injection_pour_pompe_doseuse_-_CCEI.png?v=1777376584"},{"product_id":"kit-detecteur-de-debit","title":"NORYL Flow Detector Kit - CCEI (Limpido and Phenix compatible)","description":"\u003cp\u003eThis CCEI flow detector kit is an essential accessory for securing your water treatment devices (especially Limpido and Phénix electrolysers). It automatically stops production as soon as water circulation ceases, thus preventing any risk of damage.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDesigned specifically to be perfectly compatible with \u003cb\u003eCCEI\u003c\/b\u003e brand equipment, such as the \u003cb\u003eLimpido\u003c\/b\u003e and \u003cb\u003ePhénix\u003c\/b\u003e ranges, this flow detection kit acts as a true safety circuit breaker. If your filtration pump stops or if the water flow becomes insufficient, the detector immediately cuts off the production of your treatment device.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRobust and durable materials\u003c\/strong\u003e\u003cbr\u003eThe flow detector is made of \u003cb\u003eNORYL\u003c\/b\u003e, a high-quality technical plastic known for its very high resistance to heat, corrosion, and chemicals present in pool water. This guarantees perfect watertightness and excellent durability, season after season.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick and \"Ready-to-assemble\" installation\u003c\/strong\u003e\u003cbr\u003eNo need to be a plumbing expert to install it! The kit comes complete and ready to be installed on the piping of your technical room. Thanks to the included tap-off collar and its dedicated adapter, assembly is simple, quick, and perfectly watertight.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit composition:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e1 NORYL Flow Detector\u003c\/b\u003e (robust and resistant to humid and corrosive environments).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 Tap-off collar\u003c\/b\u003e (for easy mounting on your piping).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 Custom adapter\u003c\/b\u003e (ensuring a perfect connection between the collar and the detector).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139626037585,"sku":"KT200006","price":105.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4985-12155-0-kit-detecteur-de-debit-piscine-ccei__37152__81120.1741076998.1280.1280.png?v=1760740718"},{"product_id":"kit-etalonnage-pour-ofi-ccei","title":"OFI Calibration Kit - CCEI","description":"\u003cp\u003eCalibration kit for OFI - CCEI\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139626365265,"sku":"CCEI00058","price":22.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4986-12833-0-Kit_talonnage_pour_OFI_-_CCEI__62348__87235__02293.1741077000.1280.1280.png?v=1760740729"},{"product_id":"kit-zelia-o32-38-mm-pour-piscine-hors-sol-ccei","title":"ZELIA Ø32\/38 mm kit for above-ground pools - CCEI","description":"\u003cp\u003eZELIA Ø32\/38 mm kit for above-ground pools - CCEI\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139628101969,"sku":"KT200015","price":22.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4991-12813-0-kit-zelia-32-38mm-piscine-hors-sol-ccei__43665__17150__05360.1741077006.1280.1280.png?v=1760740799"},{"product_id":"lot-2-unions-pour-limpido-ccei","title":"Lot of 2 connectors for Limpido - CCEI","description":"\u003cp data-start=\"164\" data-end=\"496\"\u003eThe \u003cstrong data-start=\"167\" data-end=\"220\"\u003eset of 2 unions for Limpido – CCEI (Ref. PR000004)\u003c\/strong\u003e is designed to replace the connection fittings of \u003cstrong data-start=\"276\" data-end=\"324\"\u003eLimpido PFXCEL electrolysis cells\u003c\/strong\u003e. These unions ensure a \u003cstrong data-start=\"354\" data-end=\"387\"\u003etight and secure attachment\u003c\/strong\u003e of the cell to the hydraulic circuit, thus allowing the electrolysis system to function properly.\u003c\/p\u003e\n\u003cp data-start=\"498\" data-end=\"666\"\u003eMade from \u003cstrong data-start=\"511\" data-end=\"535\"\u003eresistant materials\u003c\/strong\u003e, these fittings ensure \u003cstrong data-start=\"563\" data-end=\"583\"\u003eincreased longevity\u003c\/strong\u003e and perfect compatibility with \u003cstrong data-start=\"632\" data-end=\"641\"\u003eLimpido\u003c\/strong\u003e cells from the \u003cstrong data-start=\"655\" data-end=\"663\"\u003eCCEI\u003c\/strong\u003e brand.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139628331345,"sku":"PR000004","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4992-12164-0-lot-de-2-unions-pour-limpido-ccei__78385__43542.1741859801.1280.1280.png?v=1760740808"},{"product_id":"lot-2-unions-pour-zelia-ccei","title":"Lot of 2 unions for Zelia - CCEI","description":"\u003cp data-start=\"164\" data-end=\"496\"\u003eThe \u003cstrong data-start=\"167\" data-end=\"220\"\u003eset of 2 unions for Zelia – CCEI (Ref. SF160153)\u003c\/strong\u003e is designed to replace the connection fittings of \u003cstrong data-start=\"276\" data-end=\"324\"\u003eZelia ZLT, ZLC, and ZLA electrolysis cells\u003c\/strong\u003e. These unions ensure a \u003cstrong data-start=\"354\" data-end=\"387\"\u003ewatertight and secure attachment\u003c\/strong\u003e of the cell to the hydraulic circuit, thereby allowing the electrolysis system to function properly.\u003c\/p\u003e\n\u003cp data-start=\"498\" data-end=\"666\"\u003eMade from \u003cstrong data-start=\"511\" data-end=\"535\"\u003edurable materials\u003c\/strong\u003e, these fittings ensure \u003cstrong data-start=\"563\" data-end=\"583\"\u003eextended longevity\u003c\/strong\u003e and perfect compatibility with \u003cstrong data-start=\"632\" data-end=\"641\"\u003eZelia\u003c\/strong\u003e cells from the \u003cstrong data-start=\"655\" data-end=\"663\"\u003eCCEI\u003c\/strong\u003e brand.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139628462417,"sku":"SF160153","price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4993-12774-0-lot-de-2-unions-pour-zelia-ccei__69527__98352__91863.1741077008.1280.1280.png?v=1760740820"},{"product_id":"ofi-light-flotteur-intelligent-pour-piscine-ccei","title":"Ofi Light - Smart Pool Float - CCEI","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/rotator-5-rezise.jpg\" alt=\"\" width=\"100%\" height=\"100%\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow does the OFI Light smart float work?\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimply place OFI in your pool\u003c\/strong\u003e for it to constantly indicate the state of your water.\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eIt requires no intervention on your existing equipment.\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eBecause pool water is an element that is constantly changing, OFI \u003cstrong\u003econtinuously analyzes it\u003c\/strong\u003e to alert you when action on your part is necessary.\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eThus, no more manual analysis chores that you do when you think of it, and no more green water mishaps...\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eOFI thus allows you to take the right action at the best time for your pool!\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e \u003c\/p\u003e\n\u003ch2\u003eOFI Light: a smart float for a connected pool\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/mes-algoritmes.jpg\" alt=\"algo\" width=\"100%\" height=\"100%\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe probes that equip Ofi have been carefully selected. The analysis algorithms were developed in \u003cstrong\u003ecollaboration\u003c\/strong\u003e with a \u003cstrong\u003eCNRS\u003c\/strong\u003e team.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eOFI Light monitors your pool\u003c\/h3\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cbr\u003eOfi controls:\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cstrong\u003e- temperature\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- \u003cstrong\u003epH\u003c\/strong\u003e,\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- \u003cstrong\u003eChlorine\u003c\/strong\u003e \/ \u003cstrong\u003eBromine\u003c\/strong\u003e,\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- \u003cstrong\u003eSalt\u003c\/strong\u003e,\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- \u003cstrong\u003econductivity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- and the \u003cstrong\u003ehardness\u003c\/strong\u003e of your water\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eIt thus guarantees you a perfect swim.\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"rtejustify\"\u003eColor LEDs for a quick view of your pool's status\u003c\/h3\u003e\n\u003cp class=\"rtejustify\"\u003e \u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eOfi is equipped with 3-color LEDs that allow the owner to know the state of their pool at a glance:\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- green light for good water quality,\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- blue light for an action to be planned\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e- and red light if intervention is necessary\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cstrong\u003eOur goal:\u003c\/strong\u003e to offer you a simple and intuitive solution to allow you to spend less time maintaining your pool and more time enjoying it!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/ofi-light-flotteur-intelligent-pour-piscine-ccei-1.png\" alt=\"mesure sonde ofi\" width=\"800\" height=\"381\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe OFI smart float and ultra-connectivity\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo be able to function wherever you live, Ofi is \u003cstrong\u003eSigfox compatible and Bluetooth.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eThus, even in areas not covered by traditional networks, Ofi will be able to function.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/logos-de-l-ofi-light-flotteur-intelligent-pour-piscine-ccei.png\" alt=\"sigfox tech\" width=\"800\" height=\"125\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003eAn innovative and aesthetic pool float\u003c\/h3\u003e\n\u003cp class=\"rtejustify\"\u003e \u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eOFI's design has been specially studied to integrate into its environment.\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eThe OFI float also allows you to illuminate your evenings! To do this, control the lighting from your smartphone and \u003cstrong\u003echoose the desired light ambiance!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/couleurs-de-l-ofi-light-flotteur-intelligent-pour-piscine-ccei.png\" alt=\"COULEUR OFI\" width=\"800\" height=\"290\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/ofi-piscine.png\" alt=\"Ofi designe\" width=\"100%\" height=\"100%\"\u003e\u003c\/p\u003e\n\u003ch2 class=\"rtejustify\"\u003e\u003cstrong\u003eOFI probes for optimal pool control\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo enable continuous water monitoring, OFI is equipped with four probes. The temperature probe is non-removable, and there are also three electrochemical probes.\u003c\/p\u003e\n\u003cp\u003eThese three probes are colored: blue, red, and black, making them easily identifiable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe blue sensor\u003c\/strong\u003e is responsible for monitoring your water's \u003cstrong\u003epH\u003c\/strong\u003e. pH is an indicator of its \u003cstrong\u003eacidity level\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe red sensor\u003c\/strong\u003e controls the \u003cstrong\u003eredox\u003c\/strong\u003e (oxidation-reduction potential) and allows us to calculate the \u003cstrong\u003echlorine\u003c\/strong\u003e or \u003cstrong\u003ebromine level\u003c\/strong\u003e present in your water, thus ensuring that its \u003cstrong\u003edisinfecting power\u003c\/strong\u003e is sufficient to eliminate algae or bacteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe black sensor\u003c\/strong\u003e measures the \u003cstrong\u003eelectrical conductivity\u003c\/strong\u003e of your pool. This allows us to provide you with the \u003cstrong\u003ehardness\u003c\/strong\u003e or \u003cstrong\u003esalt level\u003c\/strong\u003e of your water for pools equipped with a salt electrolysis system.\u003c\/p\u003e\n\u003cp\u003eThey have been specifically designed and manufactured for OFI; installation or replacement is very simple and takes only a few seconds. There is no need to call a professional.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/ofi-light-flotteur-intelligent-pour-piscine-ccei.png\" alt=\"sonde ofi\" width=\"800\" height=\"257\"\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/utilisation-de-l-ofi-light-flotteur-intelligent-pour-piscine-ccei.png\" alt=\"installation sonde ofi\" width=\"800\" height=\"317\"\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"rtejustify\"\u003e\u003cstrong\u003eConnected float OFI and its multifunctional receptacle\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYour OFI comes with its stylish receptacle!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt will allow you to:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep OFI's probes in the water when you want to \u003cstrong\u003eremove\u003c\/strong\u003e it from your pool.\u003c\/li\u003e\n\u003cli\u003eVery easily \u003cstrong\u003ecalibrate\u003c\/strong\u003e OFI's probes.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecharge\u003c\/strong\u003e Ofi if necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/ofi-light-1.jpg\" alt=\"\" width=\"100%\" height=\"100%\"\u003e\u003c\/p\u003e\n\u003ch2 class=\"rtejustify\"\u003e \u003c\/h2\u003e\n\u003ch2 class=\"rtejustify\"\u003eManage your pool from the OFI app\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThanks to its smartphone application, Ofi allows you to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnow at any time and wherever you are, the state of your water\u003c\/strong\u003e: pH, disinfectant (chlorine, bromine, salt), hardness, and temperature.\u003c\/li\u003e\n\u003cli\u003eView the history of \u003cstrong\u003eyour analyses.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBe notified or consult the actions you need to take \u003cstrong\u003eto keep your water beautiful and balanced.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOrder maintenance products and have them delivered directly to your home if you wish.\u003c\/li\u003e\n\u003cli\u003eBe connected with a maintenance professional near you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/demo-app-resize.jpg\" alt=\"Demo App ofi\" width=\"100%\" height=\"100%\"\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/pilotage.jpg\" alt=\"App offi\" width=\"100%\" height=\"100%\"\u003e\u003c\/p\u003e\n\u003cp class=\"rtejustify\"\u003eThe application interface has been specially developed for \u003cstrong\u003esimple and intuitive use.\u003c\/strong\u003e Thus, by following the advice given to you, you are sure to make \u003cstrong\u003ethe right move at the right time.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 class=\"rtejustify\"\u003eInnovative OPI float: unlimited autonomy\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOfi stores and produces its energy thanks to a battery, a photovoltaic cell, and an induction charging module.\u003c\/p\u003e\n\u003ch2 class=\"rtejustify\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/recharge-batterie.png\" alt=\"recharge OFI\" width=\"100%\" height=\"100%\"\u003e\u003c\/h2\u003e\n\u003ch2 class=\"rtejustify\"\u003eContent and application of your OFI light\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/telechargement-appli.png\" alt=\"app offi\" width=\"100%\" height=\"100%\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139632984401,"sku":"ofilight","price":399.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4999-12641-0-OFI_light-ccei-flotteur-testeur-ph-orp__34887__90505.1741077024.1280.1280.png?v=1760740957"},{"product_id":"pompe-doseuse-peristaltique-mp1","title":"Peristaltic Dosing Pump MP1","description":"\u003ch2\u003eMicrodos MP1 Peristaltic Dosing Pump – Replacement for CCEI Controllers\u003c\/h2\u003e\n\n\u003cp\u003eIs the dosing pump on your CCEI controller no longer working correctly? \nIs it injecting irregularly, making abnormal noise, or not starting? \nThe \u003cstrong\u003eMicrodos MP1 peristaltic dosing pump\u003c\/strong\u003e is the original \nreplacement part designed for all compatible CCEI controllers and electrolyzers. \nIt ensures precise and constant injection of treatment products — pH minus, pH \nplus, flocculant — to maintain a perfectly controlled water balance without manual intervention.\u003c\/p\u003e\n\n\u003cp\u003eIt is an essential component in any automatic water treatment system. \nWithout a functional dosing pump, even the best controller on the market becomes \nincapable of correcting pH or injecting the product at the right time. Quickly \nreplacing a faulty pump prevents water imbalances, irritations, and premature \nequipment degradation.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility with CCEI Controllers and Electrolyzers\u003c\/h2\u003e\n\n\u003cp\u003eThe Microdos MP1 is the reference peristaltic dosing pump for the CCEI range. \nIt is compatible with the following devices:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eLimpido XC LAB\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLimpido Pro pH\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLimpido Pro Lab\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePhileo and Phileo LT\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eOxeo, Oxeo LT and Oxeo SP\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEqualizo DUO\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis list covers most of the installed CCEI controllers among individuals and \nprofessionals. If you own one of these devices and your dosing pump shows signs \nof failure, the MP1 is the part to order.\u003c\/p\u003e\n\n\u003ch2\u003eHow does a peristaltic dosing pump work?\u003c\/h2\u003e\n\n\u003cp\u003eUnlike a diaphragm pump, a peristaltic pump operates by progressive compression \nof a flexible tube — the Santoprene tube — between a rotor and a fixed wall. \nThis \"peristaltic\" movement creates a regular and perfectly metered suction \nand discharge of the treatment liquid, without the chemical product ever coming \ninto contact with the mechanical parts of the pump.\u003c\/p\u003e\n\n\u003cp\u003eThis principle offers several decisive advantages for use in pool water treatment: \nthe pump is insensitive to corrosive products such as acids used to lower pH, it \ndoes not clog, and its flow rate remains constant and reproducible cycle after \ncycle. Injection accuracy is thus guaranteed over time, which is essential for \nreliable automatic regulation.\u003c\/p\u003e\n\n\u003ch2\u003eSimple installation, reduced maintenance\u003c\/h2\u003e\n\n\u003cp\u003eReplacing the MP1 dosing pump does not require technician intervention. \nThe pump comes with its connector and Santoprene tubing, ready to be connected \nto your controller. Simply disconnect the old pump, connect the new one in the \nsame location, and check the tightness of the fittings before putting it back into service.\u003c\/p\u003e\n\n\u003cp\u003eThe supplied Santoprene tube is the main consumable for this type of pump: \nit wears out gradually over cycles. Its lifespan depends on the frequency of use \nand the injected products, but it is easily replaceable independently of the pump \nitself when it shows signs of wear (cracks, loss of flexibility, leaks).\u003c\/p\u003e\n\n\u003ch2\u003eWhen to replace your dosing pump?\u003c\/h2\u003e\n\n\u003cp\u003eSeveral signs indicate that it is time to change the dosing pump of your CCEI controller. \nIrregular dosing often results in unexplained pH variations despite correct probe calibration. \nAn abnormal clicking or vibrating noise can indicate wear of the tube or rotor. \nA product leak around the pump, or conversely a total absence of injection verifiable \nby observing the outlet hose, are clear signs of failure.\u003c\/p\u003e\n\n\u003cp\u003eIn all these cases, replacing the dosing pump is the quickest and least expensive \nsolution before considering replacing the entire controller. The MP1 is a normal \nwear part on an automatic treatment system used for several years — anticipating \nits replacement is part of rigorous maintenance of your installation.\u003c\/p\u003e\n\n\u003ch2\u003eAn original part for preserved performance\u003c\/h2\u003e\n\n\u003cp\u003eBy choosing the Microdos MP1, you are opting for the original part recommended \nby CCEI for its controllers. Using a non-compliant replacement dosing pump can \nlead to flow, sealing, or electrical compatibility problems with the controller. \nThe MP1 guarantees seamless integration and identical performance to the original, \nso that your automatic treatment system continues to function exactly as intended.\u003c\/p\u003e\n\n\u003cp\u003eDelivered with its connector and Santoprene tubing, it is ready to install upon \nreceipt, without having to order additional parts.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139634590033,"sku":"MPTE0216","price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5004-12189-0-pompe-doseuse-peristatique-mp1-piscine-ccei__57586__52829.1741626044.1280.1280.png?v=1760741060"},{"product_id":"pool-terre-avec-collier-de-prise-en-charge-ccei","title":"Pool-Earth with clamp - CCEI","description":"\u003cp data-start=\"211\" data-end=\"493\"\u003eThe \u003cstrong data-start=\"214\" data-end=\"283\"\u003ePool-Terre with tapping saddle – CCEI (Ref. KT200005)\u003c\/strong\u003e is an essential device to protect your pool from \u003cstrong data-start=\"348\" data-end=\"370\"\u003estray currents\u003c\/strong\u003e which can cause \u003cstrong data-start=\"393\" data-end=\"445\"\u003epremature corrosion of metallic equipment\u003c\/strong\u003e and undesirable electrolysis phenomena.\u003c\/p\u003e\n\u003cp data-start=\"495\" data-end=\"813\"\u003eEasy to install, this system allows \u003cstrong data-start=\"536\" data-end=\"594\"\u003eparasitic electrical charges to be diverted to the ground\u003c\/strong\u003e, thus ensuring \u003cstrong data-start=\"619\" data-end=\"700\"\u003ebetter protection of electrical appliances and metallic accessories\u003c\/strong\u003e present in the pool, such as ladders, stainless steel skimmers or the salt chlorinator.\u003c\/p\u003e\n\u003ch2 data-start=\"815\" data-end=\"857\"\u003e\u003cstrong data-start=\"819\" data-end=\"855\"\u003eAdvantages of the CCEI pool earthing system? \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"858\" data-end=\"1440\"\u003e✅ \u003cstrong data-start=\"860\" data-end=\"894\"\u003eCorrosion protection\u003c\/strong\u003e: Prevents premature oxidation of metallic pool components.\u003cbr data-start=\"965\" data-end=\"968\"\u003e✅ \u003cstrong data-start=\"970\" data-end=\"989\"\u003eIncreased safety\u003c\/strong\u003e: Reduces risks associated with stray currents and electrical potential differences.\u003cbr data-start=\"1082\" data-end=\"1085\"\u003e✅ \u003cstrong data-start=\"1087\" data-end=\"1110\"\u003eEasy installation\u003c\/strong\u003e: Attaches directly to a PVC pipe using its \u003cstrong data-start=\"1170\" data-end=\"1200\"\u003etapping saddle\u003c\/strong\u003e.\u003cbr data-start=\"1201\" data-end=\"1204\"\u003e✅ \u003cstrong data-start=\"1206\" data-end=\"1235\"\u003eUniversal compatibility\u003c\/strong\u003e: Suitable for all types of \u003cstrong data-start=\"1270\" data-end=\"1295\"\u003ein-ground and above-ground\u003c\/strong\u003e pools equipped with a PVC hydraulic circuit.\u003cbr data-start=\"1337\" data-end=\"1340\"\u003e✅ \u003cstrong data-start=\"1342\" data-end=\"1366\"\u003eResistant materials\u003c\/strong\u003e: Durable and efficient design for long-term protection.\u003c\/p\u003e\n\u003ch2 data-start=\"1442\" data-end=\"1486\"\u003e\u003cstrong data-start=\"1446\" data-end=\"1484\"\u003eWhy install a pool earthing system?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1487\" data-end=\"1913\"\u003eStray currents often cause \u003cstrong data-start=\"1538\" data-end=\"1622\"\u003eaccelerated corrosion and deterioration of metallic equipment\u003c\/strong\u003e present in the pool. The Pool-Terre \u003cstrong data-start=\"1663\" data-end=\"1701\"\u003eneutralizes these electrical charges\u003c\/strong\u003e and effectively protects:\u003c\/p\u003e\n\u003cp data-start=\"1487\" data-end=\"1913\"\u003e\u003cbr data-start=\"1727\" data-end=\"1730\"\u003e✔️ \u003cstrong data-start=\"1737\" data-end=\"1767\"\u003eStainless steel ladders and handrails\u003c\/strong\u003e\u003cbr data-start=\"1767\" data-end=\"1770\"\u003e✔️ \u003cstrong data-start=\"1777\" data-end=\"1815\"\u003eSalt chlorinator electrodes\u003c\/strong\u003e\u003cbr data-start=\"1815\" data-end=\"1818\"\u003e✔️ \u003cstrong data-start=\"1825\" data-end=\"1857\"\u003eMetallic skimmers\u003c\/strong\u003e\u003cbr data-start=\"1857\" data-end=\"1860\"\u003e✔️ \u003cstrong data-start=\"1867\" data-end=\"1911\"\u003ePumps and other electrical equipment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-start=\"1915\" data-end=\"1952\"\u003e\u003cstrong data-start=\"1919\" data-end=\"1950\"\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul data-start=\"1953\" data-end=\"2272\"\u003e\n\u003cli data-start=\"1953\" data-end=\"1974\"\u003e\n\u003cstrong data-start=\"1955\" data-end=\"1965\"\u003eBrand\u003c\/strong\u003e: CCEI\u003c\/li\u003e\n\u003cli data-start=\"1975\" data-end=\"2003\"\u003e\n\u003cstrong data-start=\"1977\" data-end=\"1990\"\u003eReference\u003c\/strong\u003e: KT200005\u003c\/li\u003e\n\u003cli data-start=\"2004\" data-end=\"2061\"\u003e\n\u003cstrong data-start=\"2006\" data-end=\"2014\"\u003eType\u003c\/strong\u003e: Pool-Terre with tapping saddle\u003c\/li\u003e\n\u003cli data-start=\"2062\" data-end=\"2117\"\u003e\n\u003cstrong data-start=\"2064\" data-end=\"2080\"\u003eInstallation\u003c\/strong\u003e: To be fixed on a PVC pipe\u003c\/li\u003e\n\u003cli data-start=\"2118\" data-end=\"2188\"\u003e\n\u003cstrong data-start=\"2120\" data-end=\"2137\"\u003eCompatibility\u003c\/strong\u003e: All types of pools (in-ground and above-ground)\u003c\/li\u003e\n\u003cli data-start=\"2189\" data-end=\"2272\"\u003e\n\u003cstrong data-start=\"2191\" data-end=\"2204\"\u003eMaterials\u003c\/strong\u003e: Resistant to chemicals and outdoor conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"2274\" data-end=\"2310\"\u003e\u003cstrong data-start=\"2278\" data-end=\"2308\"\u003eFAQ – Frequently asked questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"2311\" data-end=\"2531\"\u003e❓ \u003cem data-start=\"2313\" data-end=\"2365\"\u003eWhy install a Pool-Terre in my pool?\u003c\/em\u003e\u003cbr data-start=\"2365\" data-end=\"2368\"\u003e✔️ It allows for the \u003cstrong data-start=\"2383\" data-end=\"2418\"\u003eelimination of stray currents\u003c\/strong\u003e, thereby reducing \u003cstrong data-start=\"2439\" data-end=\"2480\"\u003ecorrosion of metallic equipment\u003c\/strong\u003e and improving the lifespan of installations.\u003c\/p\u003e\n\u003cp data-start=\"2533\" data-end=\"2771\"\u003e❓ \u003cem data-start=\"2535\" data-end=\"2600\"\u003eIs the Pool-Terre mandatory for a salt chlorinator?\u003c\/em\u003e\u003cbr data-start=\"2600\" data-end=\"2603\"\u003e✔️ It is not mandatory, but \u003cstrong data-start=\"2637\" data-end=\"2660\"\u003ehighly recommended\u003c\/strong\u003e to avoid premature wear of electrodes and limit the occurrence of parasitic electrolysis phenomena.\u003c\/p\u003e\n\u003cp data-start=\"2773\" data-end=\"2961\"\u003e❓ \u003cem data-start=\"2775\" data-end=\"2810\"\u003eHow to install the Pool-Terre?\u003c\/em\u003e\u003cbr data-start=\"2810\" data-end=\"2813\"\u003e✔️ Simply \u003cstrong data-start=\"2829\" data-end=\"2893\"\u003eattach the tapping saddle to a PVC pipe\u003c\/strong\u003e, then connect the earthing terminal to an earth rod.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139640881489,"sku":"KT200005","price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5005-12197-0-pool-terre-avec-collier-de-prise-en-charge-ccei__78619__69028.1741863076.1280.1280.png?v=1760741077"},{"product_id":"porte-sonde-1-2","title":"Probe holder 1\/2","description":"\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003e1\/2\" Probe Holder\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eInstallation accessory for connecting the probe to the pool's piping.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139642978641,"sku":"MPPE0270","price":8.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5006-12199-0-porte-sonde-piscine-1_2-ccei__37135__98054.1742201148.1280.1280.png?v=1760741090"},{"product_id":"solution-tampon-detalonnage-orp","title":"Meytec ORP 650mV Calibration Buffer Solution","description":"\u003cp\u003eThe \u003cstrong\u003eMeytec 650 mV ORP calibration solution\u003c\/strong\u003e is specially designed for the precise calibration of Redox (ORP) probes used in automatic swimming pool control systems.\u003c\/p\u003e\n\u003cp\u003eIt allows for accurate checking and adjustment of Redox controllers to ensure optimal oxidizing power of the water and effective disinfection.\u003c\/p\u003e\n\u003cp\u003eEssential for maintaining the reliability of your automatic treatment system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eORP value: \u003cstrong\u003e650 mV\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVolume: \u003cstrong\u003e60 mL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with all brands of Redox controllers\u003c\/li\u003e\n\u003cli\u003eReady-to-use solution\u003c\/li\u003e\n\u003cli\u003eIdeal for the maintenance of ORP probes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhy use an ORP calibration solution?\u003c\/h2\u003e\n\u003cp\u003eOver time, Redox probes can drift and display inaccurate measurements.\u003cbr\u003eRegular calibration allows you to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure effective disinfection\u003c\/li\u003e\n\u003cli\u003eAvoid over-dosing or under-dosing of products\u003c\/li\u003e\n\u003cli\u003eExtend the life of the probe\u003c\/li\u003e\n\u003cli\u003eEnsure optimal operation of the automatic controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRinse the probe with clear water.\u003c\/li\u003e\n\u003cli\u003eImmerse the probe in the 650 mV solution.\u003c\/li\u003e\n\u003cli\u003eProceed with calibration according to your controller's instructions.\u003c\/li\u003e\n\u003cli\u003eClose the bottle carefully after use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt is advisable to perform calibration at least \u003cstrong\u003eonce or twice per season\u003c\/strong\u003e, or if in doubt about the measurement.\u003c\/p\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139677286737,"sku":"MPTE0213","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Solution_Tampon_d_etalonnage_ORP_650_mV_Meytec.png?v=1778679127"},{"product_id":"solution-tampon-detalonnage-ph7","title":"Meytec pH7 Calibration Buffer Solution","description":"\u003ch2\u003epH 7 Buffer Solution for Pool pH Probe Calibration\u003c\/h2\u003e\n\u003cp\u003eFor a pH probe to measure accurately, it must be regularly calibrated with a certified reference solution. This Meytec pH 7 buffer solution is the neutral reference calibration liquid for all pool pH controllers and testers: it ensures accurate measurement and perfectly dosed water treatment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhy Calibrate Your pH Probe with a Buffer Solution?\u003c\/h2\u003e\n\u003cp\u003eAn uncalibrated pH probe can display an erroneous value of ±0.5 to ±1 pH, leading to an over- or under-dosing of pH corrector in your pool. The result: eye and skin irritation, equipment deterioration, cloudy water, or excessive product consumption. Calibration with a pH 7 buffer solution corrects this drift and restores a reliable measurement in less than 2 minutes.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCompatible with All Pool pH Controllers and Probes\u003c\/h2\u003e\n\u003cp\u003eThe pH 7 buffer solution is the universal calibration reference, compatible with all equipment on the market:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003epH\/ORP controllers: \u003cstrong\u003eCCEI Phileo, Phileo LT, Phileo PRO, Limpido\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectrolyzers with integrated pH regulation\u003c\/li\u003e\n\u003cli\u003epH testers and probes of all brands (BNC or others)\u003c\/li\u003e\n\u003cli\u003eAnalyzers and automatic treatment stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eHow to Calibrate Your pH Probe with pH 7 Buffer Solution?\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRinse the probe with clean water and gently dry it.\u003c\/li\u003e\n\u003cli\u003ePour a few milliliters of pH 7 buffer solution into a clean container.\u003c\/li\u003e\n\u003cli\u003eImmerse the probe in the solution for 1 to 2 minutes.\u003c\/li\u003e\n\u003cli\u003eAdjust the calibration point of your controller until 7.0 is displayed.\u003c\/li\u003e\n\u003cli\u003eRinse the probe again before putting it back into service.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Calibrate with each probe replacement and at least every 4 to 6 weeks during active use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Meytec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH Value:\u003c\/strong\u003e 7.0 (neutral reference solution)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 1 x 60 ml bottle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Calibration of pool pH probes and testers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Universal — all brands and all controllers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139678302545,"sku":"MPTE0205","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5038-13106-0-meytec-solution-detalonnage-ph-7-5x60ml__40674__74999.1741081467.1280.1280.png?v=1760741679"},{"product_id":"solution-tampon-detalonnage-ph9","title":"Meytec pH9 Calibration Buffer Solution","description":"\u003ch2\u003eMeytec pH 9 Calibration Buffer Solution\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong data-end=\"189\" data-start=\"162\"\u003epH 9 buffer solution\u003c\/strong\u003e is designed for the \u003cstrong data-end=\"256\" data-start=\"208\"\u003eprecise calibration of pH measuring probes\u003c\/strong\u003e (automatic analyzers, electronic testers, pool controllers, etc.).\u003cbr data-end=\"340\" data-start=\"337\"\u003eIt ensures \u003cstrong data-end=\"386\" data-start=\"356\"\u003ereliable and stable measurements\u003c\/strong\u003e, essential for perfect water balance control.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2 data-end=\"474\" data-start=\"456\"\u003eAdvantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-end=\"565\" data-start=\"477\"\u003ePrecision: pH 9 reference solution for exact calibration.\u003c\/li\u003e\n\u003cli data-end=\"565\" data-start=\"477\"\u003eCompatibility: can be used with all pH probes and measuring devices.\u003c\/li\u003e\n\u003cli data-end=\"565\" data-start=\"477\"\u003eReady to use: no mixing required, easy to use.\u003c\/li\u003e\n\u003cli data-end=\"565\" data-start=\"477\"\u003eFormat: 60 ml bottle, ideal for multiple calibrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2 data-end=\"846\" data-start=\"818\"\u003eUsage tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-end=\"910\" data-start=\"850\"\u003eRinse the probe with distilled water before each calibration.\u003c\/li\u003e\n\u003cli data-end=\"910\" data-start=\"850\"\u003eImmerse the electrode in the pH 9 buffer solution.\u003c\/li\u003e\n\u003cli data-end=\"910\" data-start=\"850\"\u003eAdjust the device according to the manufacturer's procedure.\u003c\/li\u003e\n\u003cli data-end=\"910\" data-start=\"850\"\u003eClose the bottle carefully after use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eTo ensure the reliability of your measurements, \u003cstrong data-end=\"1469\" data-start=\"1417\"\u003ecalibrate your probes at least once a month\u003c\/strong\u003e or according to the manufacturer's recommendations.\u003cbr data-end=\"1515\" data-start=\"1512\"\u003eStore the solution away from light and heat.\u003c\/p\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139679220049,"sku":"MPTE0206","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5039-13107-1-meytec-solution-detalonnage-ph-9-5x60ml__29250__22549.1741081468.1280.1280.png?v=1760741690"},{"product_id":"sonde-conductivite-pour-ofi-ccei","title":"Conductivity probe for OFI float - CCEI","description":"\u003ch4 data-path-to-node=\"2\"\u003eReplacement Conductivity Probe for OFI Float (CCEI)\u003c\/h4\u003e\n\u003cp data-path-to-node=\"4\"\u003eMaintain the accuracy of your connected \u003cb data-index-in-node=\"58\" data-path-to-node=\"4\"\u003eOFI\u003c\/b\u003e float's measurements with this original conductivity probe. Essential for the balance of your pool, it allows you to monitor water salinity or hardness in real-time directly from your smartphone.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"5\"\u003eColor Code:\u003c\/b\u003e Black (specific to conductivity).\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"7\"\u003eWhy monitor your pool's conductivity?\u003c\/h2\u003e\n\u003cp data-path-to-node=\"8\"\u003eConductivity is a key indicator for your water's health. This probe fulfills two essential functions depending on your pool's configuration:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"9,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,0,0\"\u003eSaltwater Pools:\u003c\/b\u003e It accurately measures the \u003cb data-index-in-node=\"48\" data-path-to-node=\"9,0,0\"\u003esalt level (TDS)\u003c\/b\u003e. This is a critical parameter to ensure the proper functioning of your salt chlorinator and prevent damage from lack or excess of salt.\u003c\/li\u003e\n\u003cli data-path-to-node=\"9,0,0\"\u003e\n\u003cb style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\" data-index-in-node=\"0\" data-path-to-node=\"9,1,0\"\u003eChlorine\/Bromine Pools:\u003c\/b\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e It assesses \u003c\/span\u003e\u003cb style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\" data-index-in-node=\"42\" data-path-to-node=\"9,1,0\"\u003ewater hardness\u003c\/b\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e (mineral content). A shift in conductivity can indicate a need for partial water renewal to prevent the accumulation of stabilizer or scale.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"11\"\u003eKey features of the OFI probe\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"12,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"12,0,0\"\u003eSpecial Pool Design:\u003c\/b\u003e Unlike conventional laboratory probes, this one is treated to resist chemical aggressions (chlorine, UV, pH variations) encountered in outdoor aquatic environments.\u003c\/li\u003e\n\u003cli data-path-to-node=\"12,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"12,1,0\"\u003eCertified Watertightness:\u003c\/b\u003e Equipped with a \u003cb data-index-in-node=\"46\" data-path-to-node=\"12,1,0\"\u003edouble O-ring system\u003c\/b\u003e, it guarantees absolute protection against water infiltration into the float body, thus preserving the internal electronics.\u003c\/li\u003e\n\u003cli data-path-to-node=\"12,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"12,2,0\"\u003eExpress Replacement (Plug \u0026amp; Play):\u003c\/b\u003e No tools are needed. Thanks to its specific connector, replacement takes only a few seconds by simply screwing\/clicking, ideal for winter maintenance or periodic renewal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003e\u003cmeta charset=\"utf-8\"\u003eTo extend the life of your probe and ensure reliable readings, we recommend cleaning the electrodes with a mild acid solution (or a specific probe cleaner) once per season to remove scale deposits.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139679908177,"sku":"MPTE0233","price":69.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5040-12279-0-sonde-conductivite-flotteur-intelligent-ofi-ccei__31695__38701.1741081468.1280.1280.png?v=1760741700"},{"product_id":"sonde-de-temperature-connecteur-deux-points-pour-equalizo-duo-ccei","title":"Temperature sensor + two-pin connector for Equalizo Duo - CCEI","description":"\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eTemperature probe with two-pin connector for \u003cstrong\u003eEqualizo Duo\u003c\/strong\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139681382737,"sku":"SF130051","price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5042-12283-0-sonde-de-temperature-connecteur-2points-equalizo-duo-ccei__55347__81802.1741081471.1280.1280.png?v=1760741729"},{"product_id":"sonde-de-temperature-pour-limpido-xc-et-meteo-r-ccei","title":"Temperature probe for LIMPIDO-XC AND METEO-R - CCEI","description":"\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eTemperature probe for \u003cstrong\u003eLimpido XC \/ Limpido XC LAB \/ MeteoR\u003c\/strong\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139682857297,"sku":"SF130004","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/03f30c1933f0bd1545959bc265c00a62.png?v=1777387261"},{"product_id":"sonde-orp-cable-de-connexion","title":"ORP probe + connecting cable","description":"\u003ch2\u003eCCEI ORP (Redox) Probe + Connection Cable – Replacement for Oxeo and Limpido\u003c\/h2\u003e\n\u003cp\u003eIs your CCEI regulator's ORP probe drifting, showing inconsistent values, or no longer responding? This \u003cstrong\u003eORP probe with a 3.5 m connection cable\u003c\/strong\u003e is the original CCEI replacement part, designed for devices in the \u003cstrong\u003eOxeo\u003c\/strong\u003e and \u003cstrong\u003eLimpido\u003c\/strong\u003e ranges. It ensures accurate and stable measurement of your pool water's oxidation-reduction potential, an essential condition for an automatic disinfection system to function correctly.\u003c\/p\u003e\n\u003cp\u003eAvailable in two versions depending on your device: the standard \u003cstrong\u003eORP MPTE0212+\u003c\/strong\u003e probe and the \u003cstrong\u003eORP Gold MPTE0226\u003c\/strong\u003e version, featuring a gold electrode for increased durability and accuracy over time. Check your regulator's reference before ordering to choose the appropriate version.\u003c\/p\u003e\n\u003ch2\u003eORP and Redox: what are we talking about?\u003c\/h2\u003e\n\u003cp\u003eORP — for Oxidation Reduction Potential — is synonymous with Redox. Both terms refer to exactly the same physical quantity: the oxidation-reduction potential of water, expressed in millivolts (mV). This is the value that the probe continuously measures and that your regulator uses to automatically control the injection of disinfectant — chlorine, bromine, or salt electrolysis — proportionally to the water's actual needs.\u003c\/p\u003e\n\u003cp\u003eA Redox level correctly maintained between \u003cstrong\u003e650 and 750 mV\u003c\/strong\u003e ensures effectively disinfected water, without over- or under-dosing. Below this threshold, bacteria and microorganisms can proliferate in the water despite the presence of chlorine. Above it, the risk is water overloaded with disinfectant, irritating to swimmers' eyes and skin. The ORP probe is therefore the central measuring element of any automatic disinfection regulation.\u003c\/p\u003e\n\u003ch2\u003eCompatibility with CCEI Regulators\u003c\/h2\u003e\n\u003cp\u003eThis ORP probe is the original part for the following CCEI devices:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eOxeo, Oxeo LT, Oxeo SP\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLimpido XC LAB, Limpido Pro Lab\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAny CCEI device equipped with an ORP probe slot in \u003cstrong\u003eØ 12 mm\u003c\/strong\u003e format\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe standard \u003cstrong\u003eØ 12 mm × 12.5 cm\u003c\/strong\u003e format integrates directly into your regulator's probe holder, without modification or adapter. The \u003cstrong\u003e3.5 meter\u003c\/strong\u003e cable — longer than that of the pH probe — offers great installation flexibility, especially when the technical room is far from the injection point in the pipe.\u003c\/p\u003e\n\u003ch2\u003eWhen to replace your CCEI ORP probe?\u003c\/h2\u003e\n\u003cp\u003eAn ORP probe has an average lifespan of \u003cstrong\u003e12 to 24 months\u003c\/strong\u003e depending on usage conditions and the water's chlorine concentration. Several signs should alert you to an imminent or actual failure.\u003c\/p\u003e\n\u003cp\u003eIf your regulator displays an abnormally low Redox value despite a correct chlorine level measured by test strip or colorimetric tester, this is the first sign of a drifting probe. Similarly, a value that fluctuates significantly from one measurement to another without apparent reason indicates an electrode nearing the end of its life. Finally, if the probe's calibration requires a correction greater than 50 mV compared to the reference value, replacement becomes necessary to regain reliable regulation.\u003c\/p\u003e\n\u003cp\u003eIn all these cases, replacing the ORP probe is the first action to take before considering any other intervention on the regulator. It is a simple, quick operation and significantly less costly than a diagnosis or a complete device replacement.\u003c\/p\u003e\n\u003ch2\u003eQuick installation, no specific tools required\u003c\/h2\u003e\n\u003cp\u003eReplacing the ORP probe does not require any particular technical skills. Simply switch off the regulator's power, unscrew the old probe from its holder, screw in the new one ensuring watertightness, then reconnect the cable to the corresponding connector on the regulator. Commissioning is immediate: the probe does not require calibration like a pH probe — it directly produces a voltage in millivolts that the regulator interprets without prior calibration.\u003c\/p\u003e\n\u003cp\u003eThe supplied 3.5 m cable allows for comfortable management of the distance between the probe holder installed on the return pipe and the regulator's input in the technical room, even in the most distant configurations.\u003c\/p\u003e\n\u003ch2\u003eStandard ORP probe or Gold ORP probe: which to choose?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eORP MPTE0212+\u003c\/strong\u003e version is the standard probe, suitable for common use in pools treated with liquid or granular chlorine. It is the usual replacement part for the vast majority of CCEI Oxeo and Limpido installations.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eORP Gold MPTE0226\u003c\/strong\u003e version is equipped with a gold electrode, a material known for its better resistance to oxidation and chemical corrosion. It is recommended for pools with high chlorine levels, intensive use installations, or owners wishing to extend the lifespan of their probe between replacements. Its cost is slightly higher but its life expectancy is significantly extended under demanding usage conditions.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"ORP MPTE0212+","offer_id":52139683905873,"sku":"MPTE0212+","price":97.0,"currency_code":"EUR","in_stock":true},{"title":"ORP Gold MPTE0226","offer_id":52139683938641,"sku":"MPTE0226","price":97.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5045-12286-0-sonde-orp-avec-cable-de-connexion-ccei-embout-sonde__36049__97268.1741081472.1280.1280.png?v=1760741773"},{"product_id":"sonde-orp-pour-ofi-et-ofix-vp-ccei","title":"ORP Probe for OFI and OFIX VP - CCEI","description":"\u003cp\u003e\u003cstrong\u003eRedox Probe\u003c\/strong\u003e (Oxidation-Reduction Potential).\u003c\/p\u003e\n\u003cp\u003eIt determines the disinfecting power of water and allows us to determine the chlorine level present.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eRed\u003c\/strong\u003e probe of your Ofi and your OFIX VP.\u003c\/p\u003e\n\u003cp\u003eProbe with Gold platinum for optimal operation in chlorine, bromine and salt electrolysis pools.\u003c\/p\u003e\n\u003cp\u003eEquipped with a double O-ring for perfect sealing.\u003c\/p\u003e\n\u003cp\u003ePlug \u0026amp; play system for replacement in seconds\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"ERP","offer_id":52139685609809,"sku":"MPTE0231","price":65.0,"currency_code":"EUR","in_stock":true},{"title":"ORP Gold","offer_id":52139685642577,"sku":"MPTE0231G","price":69.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5046-12290-0-sonde-orp-flotteur-intelligent-ofi-ccei__60941__33607.1741081475.1280.1280.png?v=1760741785"},{"product_id":"sonde-ph-cable-de-connexion","title":"pH probe + connection cable","description":"\u003ch2\u003eCCEI Replacement pH Probe with Connection Cable\u003c\/h2\u003e\n\n\u003cp\u003eIs the pH probe of your CCEI pool regulator drifting, unresponsive, or displaying \ninconsistent values? This original CCEI pH probe with a 2m BNC connection cable is the \nexact replacement part to restore reliable measurement and perfectly controlled water \nbalance.\u003c\/p\u003e\n\n\u003ch2\u003eGuaranteed Compatibility with Your CCEI Equipment\u003c\/h2\u003e\n\n\u003cp\u003eThis pH probe is the original part for all CCEI regulator and salt chlorinator ranges \nequipped with a BNC connector:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003epH\/ORP regulators: \u003cstrong\u003ePhileo, Phileo LT, Phileo PRO, Phileo PRO LT\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eSalt + pH chlorinators: \u003cstrong\u003eSEL\/Ph\u003c\/strong\u003e range\n\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLimpido\u003c\/strong\u003e range\n\u003c\/li\u003e\n  \u003cli\u003eAny regulation device equipped with a \u003cstrong\u003euniversal BNC connector\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eNot compatible\u003c\/strong\u003e with the Système 7 pH Alliance Piscines.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation in Less Than 5 Minutes\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e2-meter\u003c\/strong\u003e BNC cable allows for immediate installation without modifying \nexisting wiring. Simply unscrew the old probe, screw in the new one, and perform a quick \ncalibration with a pH 7 buffer solution to regain precise measurement. The standard \n\u003cstrong\u003eØ 12 mm × 12.5 cm\u003c\/strong\u003e size fits directly into your regulator's probe holder.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Replace Your CCEI pH Probe?\u003c\/h2\u003e\n\n\u003cp\u003eThe average lifespan of a pH probe is \u003cstrong\u003e12 to 18 months\u003c\/strong\u003e, depending on usage \nconditions. It's time to replace it if:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThe displayed measurement is unstable or drifts quickly after calibration\u003c\/li\u003e\n  \u003cli\u003eCalibration is impossible or requires a correction greater than ±1 pH\u003c\/li\u003e\n  \u003cli\u003eThe probe is cracked, fouled, or has persistent limescale deposits\u003c\/li\u003e\n  \u003cli\u003eMore than 18 months of use in chlorinated or saltwater\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e CCEI (original part)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Ø 12 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProbe length:\u003c\/strong\u003e 12.5 cm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 2 m, BNC connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Universal BNC + CCEI Phileo \/ Limpido range\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp class=\"p1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139686920529,"sku":"MPTE0221","price":59.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5047-12653-0-Sonde_pH_2__35986__22107.1741081476.1280.1280.png?v=1760741797"},{"product_id":"sonde-ph-pour-ofi-et-ofix-vp-ccei","title":"pH Probe for OFI and OFIX VP - CCEI","description":"\u003cp\u003e\u003cstrong\u003epH probe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt determines the acidity of your water. pH is an essential element for the balance of your pool water.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eBlue \u003c\/strong\u003eprobe from your Ofi or OFIX VP.\u003c\/p\u003e\n\u003cp\u003eEquipped with a double O-ring for perfect sealing.\u003c\/p\u003e\n\u003cp\u003ePlug \u0026amp; play system for replacement in seconds\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139687870801,"sku":"MPTE0232","price":59.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/sondepHpourOFIetOFIXVP.jpg?v=1772636911"},{"product_id":"tube-santoprene-pour-pompe-microdos","title":"Santoprene Tubing for Microdos CCEI Pump – pHileo, Limpido, Oxeo Replacement Part","description":"\u003ch2 data-path-to-node=\"2\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"2\"\u003eSantoprene Tube for Microdos Pump: The Original CCEI Part\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp data-path-to-node=\"3\"\u003eThe \u003cb data-index-in-node=\"3\" data-path-to-node=\"3\"\u003eSantoprene peristaltic tube\u003c\/b\u003e is a strategic wear part for the proper functioning of your automatic control system. Designed to resist the most aggressive chemicals (pH corrector, liquid chlorine), this flexible tube guarantees precise and safe dosing for your pool water.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"4\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"4\"\u003eExtensive compatibility: pHileo, Limpido, and Oxeo\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eThis replacement tube is the standard model used by many water treatment manufacturers. It is perfectly suited for the following equipment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"6,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,0,0\"\u003e\u003ca href=\"https:\/\/www.poolplanet.com\/collections\/regulateurs-de-ph-redox-orp\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eCCEI Regulators\u003c\/span\u003e\u003c\/a\u003e:\u003c\/b\u003e \u003ca href=\"https:\/\/www.poolplanet.com\/search?type=product\u0026amp;q=phileo\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003epHileo\u003c\/span\u003e\u003c\/a\u003e, pHileo VP, Oxeo, Orpheo, and Limpido.\u003c\/li\u003e\n\u003cli data-path-to-node=\"6,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,1,0\"\u003eMicrodos Systems:\u003c\/b\u003e Dosing pumps MP1, MP2, and \"Speedy\" models.\u003c\/li\u003e\n\u003cli data-path-to-node=\"6,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"6,2,0\"\u003eVigipool Equipment:\u003c\/b\u003e Ideal for the maintenance of your connected dosing pumps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"7\"\u003eWhy replace your dosing pump tube?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"8\"\u003eSantoprene is a high-performance elastomer, but the repeated pressure from the rollers eventually fatigues the material. An annual replacement, ideally during winterization or restart, helps prevent:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"9,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,0,0\"\u003eCorrosive product leaks\u003c\/b\u003e that could damage your pump's motor.\u003c\/li\u003e\n\u003cli data-path-to-node=\"9,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,1,0\"\u003eIncorrect pH or Chlorine readings\u003c\/b\u003e due to an irregular dosing flow.\u003c\/li\u003e\n\u003cli data-path-to-node=\"9,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,2,0\"\u003eCrystallization\u003c\/b\u003e of chemicals inside the hardened tube.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to replace the Santoprene tube of your dosing pump?\u003c\/h3\u003e\n\u003cp\u003eThe Santoprene tube is a normal wear part: its lifespan varies depending on the pump's frequency of use, the nature of the injected product, and storage conditions between seasons. Generally, it is advisable to visually inspect it \u003cstrong\u003eonce per season\u003c\/strong\u003e and replace it as soon as any of the following signs appear.\u003c\/p\u003e\n\u003cp\u003eA product leak at the pump — even a minimal one — often indicates a micro-crack or perforation of the tube. Irregular injection or a reduced flow rate without apparent mechanical reason can also betray a tube that has lost its elasticity and no longer compresses correctly. Visually, a hardened, discolored tube or one showing whitish traces of chemical crystallization should be replaced without delay. Finally, after a season of prolonged winter storage — especially if the pump has not been rinsed before storage — it is recommended to systematically replace the tube at the beginning of the season to start anew on reliable foundations.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"10\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"10\"\u003eTechnical specifications of the Microdos tube\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"11,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,0,0\"\u003eMaterial:\u003c\/b\u003e High-resistance Santoprene (acid and chlorine compatible).\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,1,0\"\u003eDimensions:\u003c\/b\u003e Total length with fittings approximately \u003cb data-index-in-node=\"53\" data-path-to-node=\"11,1,0\"\u003e15.5 cm\u003c\/b\u003e.\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,2,0\"\u003eInstallation:\u003c\/b\u003e Quick replacement without specific tools (Plug \u0026 Play system).\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,3,0\"\u003eQuality:\u003c\/b\u003e Certified original spare part for maximum longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSantoprene: a material designed for pool chemicals\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSantoprene\u003c\/strong\u003e is a thermoplastic elastomer specifically developed to resist chemically aggressive environments. In a pool dosing pump, the tube is in direct and permanent contact with the treatment products injected: hydrochloric or sulfuric acid to lower the pH, soda or carbonate to raise it, sodium hypochlorite for disinfection. These products are corrosive to most conventional materials.\u003c\/p\u003e\n\u003cp\u003eSantoprene resists this chemical aggressiveness while maintaining the flexibility necessary for the proper functioning of the peristaltic pump. Its flexibility allows for repeated compression and decompression by the rotor without cracking or hardening prematurely, which guarantees a constant and precise injection flow over time. This is why it is the reference material for this type of application in automatic water treatment.\u003c\/p\u003e\n\u003ch3\u003eSimple replacement, without specific tools\u003c\/h3\u003e\n\u003cp\u003eReplacing the Santoprene tube is an operation accessible to any owner, without requiring the intervention of a technician. Simply cut the power to the regulator, open the Microdos pump cover, carefully remove the old tube by detaching its ends from the connectors, then install the new tube, ensuring that the ends are correctly engaged and sealed on both sides. Immediate restart is then possible.\u003c\/p\u003e\n\u003cp\u003eOrdering this consumable in advance — and having one in stock in your technical room — is good practice to avoid an interruption of automatic dosing in peak season, precisely when your pool is most in demand. At just €9, it's the least expensive spare part of your automatic treatment installation, yet one of the most critical for maintaining dosing accuracy.\u003c\/p\u003e\n\u003ch3\u003eTo order in addition to the \u003ca href=\"https:\/\/www.poolplanet.com\/products\/pompe-doseuse-peristaltique-mp1?_pos=1\u0026amp;_psq=mp1\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eMicrodos MP1 pump\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003cp\u003eIf your dosing pump exhibits significant malfunctions — abnormal noise, total absence of injection, blocked rotor — it may be necessary to replace the entire pump rather than just the tube. The \u003cstrong\u003eMicrodos MP1 peristaltic dosing pump\u003c\/strong\u003e, available on Pool Planet, comes with its original Santoprene tube. In intermediate cases where the pump is working correctly but only the tube is worn, this replacement tube is sufficient to restore optimal performance at a lower cost.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139711496529,"sku":"MPTE0308","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5070-12335-0-tube-santoprene-pour-pompe-microdos-ccei__36279__77905.1741081506.1280.1280.png?v=1760742093"},{"product_id":"carte-electronique-phileo-avec-afficheur","title":"Phileo electronic board with display","description":"\u003cp\u003eElectronic board for Phileo with display. Replacement electronic board for Phileo with display. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo check compatibility with your Phileo, please contact our customer service with the serial number of your device. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139887657297,"sku":"SF11009E","price":185.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5258-12967-0-cover246-2447__53719__04580.1741081757.1280.1280.jpg?v=1760744826"},{"product_id":"solution-de-nettoyage-h2o-60ml-meytec","title":"Meytec H2O 60 mL Electrode Cleaning Solution – pH ORP EC Pool Probes","description":"\u003ch2\u003eMeytec H2O cleaning solution: essential maintenance for your pool electrodes\u003c\/h2\u003e\n\n\u003cp\u003epH, ORP (Redox), and EC (conductivity) probes are at the heart of your pool's automatic water treatment regulation. Over time, deposits of limescale, biofilm, grease, and organic residues accumulate on the sensitive membrane of the electrode. This progressive fouling degrades the accuracy of measurements and can lead to errors in dosing your treatment products. Meytec's H2O cleaning solution, packaged in a 60 mL bottle, has been formulated to effectively dissolve these impurities without harming the fragile components of your probes.\u003c\/p\u003e\n\n\u003cp\u003eMeytec is a European manufacturer specializing in certified calibration solutions and measurement instruments for water treatment. Its products are manufactured according to the strictest international standards and benefit from NIST traceability with a certificate of analysis. The H2O cleaning solution is part of a comprehensive range that also includes pH and ORP calibration buffer solutions, as well as KCL storage solution for electrode winterization.\u003c\/p\u003e\n\n\u003ch2\u003eWhy regularly clean your pool measurement probes?\u003c\/h2\u003e\n\n\u003cp\u003eA fouled electrode no longer transmits reliable values to your regulator. Specifically, if your pH probe displays an incorrect pH, the regulator will adjust the acid or base injection inappropriately, which can lead to cloudy, irritating, or poorly disinfected water. The same reasoning applies to the Redox probe for disinfection control and the conductivity probe for managing the salt level of an electrolyzer.\u003c\/p\u003e\n\n\u003cp\u003eRegular cleaning, ideally once a month during the swimming season, helps maintain membrane reactivity and measurement accuracy. It's a simple step that significantly extends the lifespan of your electrodes, the replacement of which represents a significant cost.\u003c\/p\u003e\n\n\u003ch2\u003eHow to use Meytec H2O solution\u003c\/h2\u003e\n\n\u003cp\u003eUsing the cleaning solution is simple and requires no special tools. Start by rinsing the electrode with clear water or distilled water. Then immerse the tip of the probe in the H2O solution for about ten minutes to allow the liquid to act on the deposits. Rinse the electrode thoroughly with water before putting it back into service or placing it in a KCL storage solution if you are removing it for winterization. Never use household products, vinegar, or hydrochloric acid to clean a probe: these substances can irreparably damage the sensitive glass membrane of the electrode.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal compatibility with market probes\u003c\/h2\u003e\n\n\u003cp\u003eMeytec H2O cleaning solution is compatible with all pH, ORP, and EC electrodes, regardless of the brand of your regulator or analyzer: CCEI, Hayward, Zodiac, Pentair, Astralpool, Bayrol, Ondilo, or any other manufacturer using standard BNC connector probes. It is suitable for both in-line probes mounted on the hydraulic circuit and removable electrodes of portable testers.\u003c\/p\u003e\n\n\u003ch2\u003eH2O solution, KCL solution, buffer solution: what are the differences?\u003c\/h2\u003e\n\n\u003cp\u003eThe Meytec range includes several types of solutions, each playing a distinct role in maintaining your probes. The H2O cleaning solution is used to remove deposits and impurities accumulated on the membrane. The KCL storage solution keeps the electrode in an optimal humid and ionic environment when not in use, especially during winterization. Buffer solutions (pH 4, pH 7, pH 9, ORP 475 mV, etc.) are used for calibration, i.e., to verify and recalibrate measurement accuracy.\u003c\/p\u003e\n\n\u003cp\u003eFor complete maintenance of your probes, it is recommended to proceed in the following order: cleaning with H2O solution, then calibration with the corresponding buffer solution, and finally storage in KCL solution if the probe is removed from the circuit. Pool Planet offers all these Meytec solutions in individual 60 mL bottles or as a complete kit.\u003c\/p\u003e\n\n\u003ch2\u003ePractical and economical format\u003c\/h2\u003e\n\n\u003cp\u003eThe 60 mL bottle is perfectly suited for domestic use. A few milliliters are enough to immerse the tip of a probe, which represents several cleanings per bottle. The compact format is easy to store in the technical room and keeps for a long time thanks to an extended shelf life.\u003c\/p\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139888017745,"sku":"H20-60","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5261-13110-1-meytec-solution-de-nettoyage-5x60ml__50564__68035.1741610858.1280.1280.png?v=1760744871"},{"product_id":"solution-de-stockage-kcl-60ml-meytec","title":"KCL Storage Solution (60mL) - Meytec","description":"\u003cp data-start=\"307\" data-end=\"646\"\u003eThe \u003cstrong data-start=\"310\" data-end=\"352\"\u003eKCL Meytec storage solution (60mL)\u003c\/strong\u003e is specially designed to ensure the \u003cstrong data-start=\"393\" data-end=\"423\"\u003eprotection and longevity\u003c\/strong\u003e of your pH and Redox electrodes when not in use. By immersing your probes in this solution, you prevent them from drying out and guarantee \u003cstrong data-start=\"585\" data-end=\"616\"\u003eaccurate and reliable measurements\u003c\/strong\u003e when they are reused.\u003c\/p\u003e\n\u003cp data-start=\"307\" data-end=\"646\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"648\" data-end=\"712\"\u003eWhy use KCL Meytec storage solution?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"713\" data-end=\"1120\"\u003e\n\u003cstrong data-start=\"715\" data-end=\"754\"\u003ePreserves the electrode membrane\u003c\/strong\u003e: prevents drying out and premature aging.\u003c\/li\u003e\n\u003cli data-start=\"713\" data-end=\"1120\"\u003e\n\u003cstrong data-start=\"815\" data-end=\"852\"\u003eOptimizes measurement accuracy\u003c\/strong\u003e: maintains probe stability and responsiveness.\u003c\/li\u003e\n\u003cli data-start=\"713\" data-end=\"1120\"\u003e\n\u003cstrong data-start=\"912\" data-end=\"946\"\u003eEssential for winter storage\u003c\/strong\u003e: ideal for protecting your probes during periods of non-use.\u003c\/li\u003e\n\u003cli data-start=\"713\" data-end=\"1120\"\u003e\n\u003cstrong data-start=\"1025\" data-end=\"1071\"\u003eCompatible with pH and Redox electrodes\u003c\/strong\u003e: suitable for most models on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"1122\" data-end=\"1145\"\u003eInstructions for use\u003c\/h2\u003e\n\u003col data-start=\"1146\" data-end=\"1408\"\u003e\n\u003cli data-start=\"1146\" data-end=\"1232\"\u003e\n\u003cstrong data-start=\"1149\" data-end=\"1163\"\u003eFill\u003c\/strong\u003e the protective cap of your electrode with the KCL solution.\u003c\/li\u003e\n\u003cli data-start=\"1233\" data-end=\"1291\"\u003e\n\u003cstrong data-start=\"1236\" data-end=\"1247\"\u003eImmerse\u003c\/strong\u003e the tip of the probe in the solution.\u003c\/li\u003e\n\u003cli data-start=\"1292\" data-end=\"1408\"\u003e\n\u003cstrong data-start=\"1295\" data-end=\"1306\"\u003eStore\u003c\/strong\u003e the probe vertically in a place protected from light and extreme temperatures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"1410\" data-end=\"1447\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul data-start=\"1448\" data-end=\"1599\"\u003e\n\u003cli data-start=\"1448\" data-end=\"1471\"\u003e\n\u003cstrong data-start=\"1450\" data-end=\"1460\"\u003eBrand\u003c\/strong\u003e: Meytec\u003c\/li\u003e\n\u003cli data-start=\"1472\" data-end=\"1497\"\u003e\n\u003cstrong data-start=\"1474\" data-end=\"1488\"\u003eVolume\u003c\/strong\u003e: 60mL\u003c\/li\u003e\n\u003cli data-start=\"1498\" data-end=\"1552\"\u003e\n\u003cstrong data-start=\"1500\" data-end=\"1520\"\u003eSolution type\u003c\/strong\u003e: KCL (Potassium Chloride)\u003c\/li\u003e\n\u003cli data-start=\"1553\" data-end=\"1599\"\u003e\n\u003cstrong data-start=\"1555\" data-end=\"1572\"\u003eCompatibility\u003c\/strong\u003e: pH and Redox electrodes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139888050513,"sku":"KCL-60","price":7.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/SolutionKCL_84dbe27f-1145-4215-8a05-ef1a9dfffc2d.png?v=1780050662"},{"product_id":"kit-de-remise-en-route-traitement-piscine","title":"Start-up kit for swimming pool treatment testing and regulation","description":"\u003ch2\u003eCCEI Microdos Dosing Pump Startup Kit: Prepare Your Pool for the Season\u003c\/h2\u003e\n\n\u003cp\u003eAt the start of every season, peristaltic dosing pumps require specific maintenance to restore their dosing accuracy. This CCEI startup kit brings together the five essential parts for maintaining the Microdos pump integrated into the brand's regulators and automatic treatment systems. With a single purchase, you have everything you need to recalibrate your probes, replace mechanical wear parts, and secure the injection circuit before treatment resumes.\u003c\/p\u003e\n\n\u003ch2\u003eWhat does the kit contain and what is the purpose of each component?\u003c\/h2\u003e\n\n\u003cp\u003eThe kit consists of a replacement Santoprene tube, a roller with its support (CCEI reference MPTE0310), a complete injection kit, a pH 7 calibration buffer solution, and an H₂O probe cleaning solution. The Santoprene tube is the key component of the peristaltic mechanism: it is compressed and released alternately by the roller, drawing in and then discharging the corrective product into the hydraulic circuit. After a full season of mechanical compression and contact with acidic or basic chemicals, this thermoplastic elastomer loses elasticity and can lead to irregular dosing, or even a leak. The roller and its support ensure uniform pressure on the tube: their simultaneous replacement guarantees a new roller-tube coupling and therefore optimal mechanical operation from restart.\u003c\/p\u003e\n\n\u003cp\u003eThe injection kit allows for the renewal of the entire connection system between the corrective product container and the pool piping. The pH 7 buffer solution, essential for pH probe calibration, ensures that the initial measurement is reliable before any automatic regulation. Finally, the H₂O cleaning solution removes limescale deposits and chemical residues accumulated on the probe during winterization, which improves the sensor's responsiveness and lifespan.\u003c\/p\u003e\n\n\u003ch2\u003eWhich CCEI devices is this kit compatible with?\u003c\/h2\u003e\n\n\u003cp\u003eThis startup kit is designed for CCEI devices incorporating a Microdos MP1 peristaltic dosing pump. This includes the Phileo and Phileo VP pH regulators, the Limpido treatment system (all versions), the OXEO electrolyzer-regulator, and the Daisy regulator. If your CCEI device is equipped with a Microdos pump, recognizable by its compact peristaltic head, this kit is suitable for it. However, it is not suitable for dosing pumps from other manufacturers or for CCEI models that do not incorporate the Microdos mechanism.\u003c\/p\u003e\n\n\u003ch2\u003eWhen and how often should these parts be replaced?\u003c\/h2\u003e\n\n\u003cp\u003eCCEI recommends replacing the Santoprene tube and roller at each restart after winterization, i.e., once a year. The tube is subjected to permanent compression and contact with corrosive products (pH-, pH+, liquid chlorine): even if it does not show any visible cracks, its progressive deformation reduces dosing accuracy. pH probe calibration with the buffer solution should also be carried out at each restart, and ideally a second time in mid-season if swimming conditions are intensive. Probe cleaning follows the same schedule. These simple steps help prevent overdosing or underdosing of treatment products, two situations that degrade water quality and can damage the pool liner or irritate swimmers' skin.\u003c\/p\u003e\n\n\u003ch2\u003eHow to install the kit: an operation accessible to everyone\u003c\/h2\u003e\n\n\u003cp\u003eReplacing the parts requires no specific tools and takes only a few minutes. Start by cutting off the power to the device and draining the chemical product circuit. Open the peristaltic head cover, remove the old Santoprene tube by releasing its ends from the input and output connectors, then insert the new tube, ensuring that the ends are correctly locked. Replace the roller and its support, then close the cover. Connect the new injection kit between the corrective product container and the injection point on the piping. Finally, clean the probe with the supplied H₂O solution, proceed with calibration by immersing the probe in the pH 7 buffer solution, and launch the calibration from your device's menu. A manual dosing cycle will allow you to verify that everything is working correctly before switching back to automatic mode.\u003c\/p\u003e\n\n\u003ch2\u003eMicrodos startup kit vs purchasing separate parts\u003c\/h2\u003e\n\n\u003cp\u003ePurchasing the five components separately is possible, but the kit offers economic and practical advantages. You are guaranteed to have genuine CCEI parts that are perfectly compatible with each other, without the risk of forgetting an item when putting the system back into service. In addition, grouping wear parts in a single shipment simplifies the management of your maintenance stock and reduces delivery costs. It's the most direct solution for approaching the season with peace of mind, with a calibrated and reliable regulation system from the first day of filtration.\u003c\/p\u003e\n\n\u003ch2\u003eWhy is annual dosing pump maintenance so important?\u003c\/h2\u003e\n\n\u003cp\u003eThe dosing pump is the executive arm of your pH regulator or automatic treatment system. If it injects inaccurately, the entire regulation chain is distorted: the probe measures, the device calculates, but the volume of product actually injected no longer corresponds to the setpoint. This results in pH fluctuations, cloudy or irritating water, overconsumption of chemicals, and ultimately, premature wear of the electrolyzer cell or the pool liner. By investing a few minutes and a startup kit at the beginning of each season, you preserve the performance of your entire CCEI installation and optimize your consumption of treatment products throughout the summer.\u003c\/p\u003e\n\u003ch2\u003eThis startup kit includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 MICRODOS roller and support\u003c\/li\u003e\n\u003cli\u003e1 injection kit for dosing pump\u003c\/li\u003e\n\u003cli\u003e1 Santoprene tube for MICRODOS pump\u003c\/li\u003e\n\u003cli\u003e1 pH 7 calibration buffer solution\u003c\/li\u003e\n\u003cli\u003e1 H₂O probe cleaning solution\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139890999633,"sku":"PPNT0008","price":69.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Kit_pour_remise_en_route_traitement_piscine__53536.1743431199.1280.1280.png?v=1760745046"},{"product_id":"carte-phileo-pro-ccei","title":"Philéo Pro card - CCEI","description":"\u003cp\u003ePhiléo Pro electronic board\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139894309201,"sku":"SF11009EV03","price":210.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Carte_Philo_pro__58240.1746800876.1280.1280.jpg?v=1760745245"},{"product_id":"carte-electronique-phileo","title":"Phileo electronic board","description":"\u003cp\u003eElectronic board for Phileo regulator\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139899814225,"sku":"PH21420325","price":210.0,"currency_code":"EUR","in_stock":false}]},{"product_id":"solution-tampon-d-etalonnage-ph-4-01","title":"pH Calibration Buffer Solution 4.01 - Meytec","description":"\u003ch2\u003eMeytec pH 4.01 Calibration Buffer Solution\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong data-start=\"178\" data-end=\"205\"\u003epH 4.01 buffer solution\u003c\/strong\u003e is essential for \u003cstrong data-start=\"229\" data-end=\"279\"\u003eaccurate calibration of pH measurement probes\u003c\/strong\u003e (automatic analyzers, electronic testers, pool controllers, etc.).\u003cbr data-start=\"360\" data-end=\"363\"\u003eIt guarantees reliable pH measurement of your water, which is crucial for treating and balancing your pool.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"482\" data-end=\"500\"\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"503\" data-end=\"592\"\u003eAccuracy: pH 4.01 reference solution for precise calibration.\u003c\/li\u003e\n\u003cli data-start=\"503\" data-end=\"592\"\u003eCompatibility: suitable for all pH probes and measuring devices.\u003c\/li\u003e\n\u003cli data-start=\"503\" data-end=\"592\"\u003eEasy to use: ready-to-use, no mixing required.\u003c\/li\u003e\n\u003cli data-start=\"503\" data-end=\"592\"\u003eFormat: 60 ml bottle, ideal for multiple calibrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"839\" data-end=\"867\"\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"871\" data-end=\"926\"\u003eRinse the probe with distilled water before calibration.\u003c\/li\u003e\n\u003cli data-start=\"871\" data-end=\"926\"\u003eImmerse the electrode in the pH 4.01 buffer solution.\u003c\/li\u003e\n\u003cli data-start=\"871\" data-end=\"926\"\u003eAdjust the device according to the manufacturer's instructions.\u003c\/li\u003e\n\u003cli data-start=\"871\" data-end=\"926\"\u003eClose the bottle carefully after use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"1394\" data-end=\"1633\"\u003eFor consistently reliable measurements, \u003cstrong data-start=\"1427\" data-end=\"1496\"\u003ecalibrate your probe at least once a month\u003c\/strong\u003e or at the frequency recommended by your device manufacturer.\u003cbr data-start=\"1566\" data-end=\"1569\"\u003eStore the solution away from light and heat.\u003c\/p\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139902468433,"sku":"PHB-401-60","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Solution_meytec_pH_4.01__02340.1758805118.1280.1280.png?v=1760745735"},{"product_id":"solution-tampon-d-etalonnage-orp-475mv-meytec","title":"ORP Calibration Buffer Solution 475mV - Meytec","description":"\u003cp\u003eThe \u003cstrong data-start=\"149\" data-end=\"179\"\u003eORP 475 mV buffer solution\u003c\/strong\u003e is specially designed for the precise calibration of redox potential (ORP) measurement probes.\u003cbr data-start=\"279\" data-end=\"282\"\u003eIt ensures reliable and consistent measurements, essential for optimal water treatment control in your pool or spa.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"424\" data-end=\"442\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"445\" data-end=\"534\"\u003ePrecision: 475 mV reference solution for exact calibration.\u003c\/li\u003e\n\u003cli data-start=\"445\" data-end=\"534\"\u003eCompatibility: suitable for all ORP probes and measuring devices.\u003c\/li\u003e\n\u003cli data-start=\"445\" data-end=\"534\"\u003eReady to use: no preparation necessary.\u003c\/li\u003e\n\u003cli data-start=\"445\" data-end=\"534\"\u003eFormat: 60 ml bottle, ideal for multiple calibrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"763\" data-end=\"791\"\u003e \u003c\/h3\u003e\n\u003ch3 data-start=\"763\" data-end=\"791\"\u003e\u003cstrong\u003eInstructions for Use\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"795\" data-end=\"850\"\u003eRinse the probe with distilled water before calibration.\u003c\/li\u003e\n\u003cli data-start=\"795\" data-end=\"850\"\u003eImmerse the electrode in the ORP 475 mV buffer solution.\u003c\/li\u003e\n\u003cli data-start=\"795\" data-end=\"850\"\u003eAdjust the device according to the manufacturer's instructions.\u003c\/li\u003e\n\u003cli data-start=\"795\" data-end=\"850\"\u003eCarefully close the bottle after each use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"1346\" data-end=\"1580\"\u003eFor consistently reliable measurements, \u003cstrong data-start=\"1381\" data-end=\"1454\"\u003ecalibrate your redox probe at least once a month\u003c\/strong\u003e or according to your device manufacturer's recommendations.\u003cbr data-start=\"1515\" data-end=\"1518\"\u003eStore the bottle away from light and heat.\u003c\/p\u003e","brand":"MEYTEC","offers":[{"title":"Default Title","offer_id":52139902599505,"sku":"RXB-475-60","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Solution_meytec_ORP_475__81603.1758806660.1280.1280.png?v=1760745745"},{"product_id":"support-de-fixation-pour-electrolyseur-au-sel-turbo-salt-sel-in-poolex","title":"Mounting bracket for Turbo Salt \/ Sel-In Poolex salt chlorinator","description":"\u003cp data-end=\"496\" data-start=\"291\"\u003eThe \u003cstrong data-end=\"371\" data-start=\"294\"\u003ePoolex Turbo Salt and Sel-In salt chlorinator mounting bracket\u003c\/strong\u003e is the essential part for safely installing your water treatment device in your technical room.\u003c\/p\u003e\n\u003cp data-end=\"794\" data-start=\"498\"\u003eSpecifically designed for \u003cstrong data-end=\"557\" data-start=\"536\"\u003ePoolex Turbo Salt\u003c\/strong\u003e and \u003cstrong data-end=\"578\" data-start=\"561\"\u003ePoolex Sel-In\u003c\/strong\u003e models, this original manufacturer's bracket guarantees \u003cstrong data-end=\"646\" data-start=\"624\"\u003eperfect stability\u003c\/strong\u003e, limits vibrations, and protects your chlorinator from the stresses of the pool environment (humidity, temperature variations).\u003c\/p\u003e\n\u003cp data-end=\"959\" data-start=\"796\"\u003eThanks to its \u003cstrong data-end=\"837\" data-start=\"818\"\u003emulti-position\u003c\/strong\u003e design, it allows for \u003cstrong data-end=\"886\" data-start=\"853\"\u003ewall or floor installation\u003c\/strong\u003e, easily adapting to all technical room configurations.\u003c\/p\u003e\n\u003cp data-end=\"959\" data-start=\"796\"\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"7\"\u003eHighlights of the Poolex mounting bracket\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,0,0\"\u003eMulti-position installation:\u003c\/b\u003e \u003cb data-index-in-node=\"43\" data-path-to-node=\"8,0,0\"\u003efloor\u003c\/b\u003e or \u003cb data-index-in-node=\"50\" data-path-to-node=\"8,0,0\"\u003ewall\u003c\/b\u003e mounting depending on the space available in your technical room.\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,1,0\"\u003eProtection \u0026amp; longevity:\u003c\/b\u003e keeps the chlorinator in a raised position, thus avoiding areas of water and humidity accumulation on the floor, thereby protecting the electronics.\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,2,0\"\u003eOptimal ventilation:\u003c\/b\u003e ensures perfect stability while promoting air circulation around the device for effective cooling.\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,3,0\"\u003eRobust design:\u003c\/b\u003e high-resistance materials designed to withstand the conditions of a pool environment.\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,4,0\"\u003ePerfect compatibility:\u003c\/b\u003e developed for the \u003cb data-index-in-node=\"65\" data-path-to-node=\"8,4,0\"\u003ePoolex Turbo Salt\u003c\/b\u003e and \u003cb data-index-in-node=\"86\" data-path-to-node=\"8,4,0\"\u003ePoolex Sel-In\u003c\/b\u003e ranges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"9\"\u003eWhy choose this mounting bracket?\u003c\/h2\u003e\n\u003cp data-path-to-node=\"10\"\u003eThe Turbo Salt chlorinator is a compact technological marvel. To ensure its proper functioning, stable installation is crucial. This official mounting bracket not only saves significant space but also facilitates access to controls and the cell for seasonal maintenance.\u003c\/p\u003e\n\u003cp data-path-to-node=\"11\"\u003eBy choosing this bracket, you secure your investment and ensure a flawless finish for your hydraulic installation.\u003c\/p\u003e\n\u003cp data-path-to-node=\"11\"\u003e \u003c\/p\u003e\n\u003ch2 data-end=\"2038\" data-start=\"2011\"\u003eInstallation and advice\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-end=\"2096\" data-start=\"2042\"\u003eInstall the bracket on a stable and flat surface.\u003c\/li\u003e\n\u003cli data-end=\"2096\" data-start=\"2042\"\u003eLeave sufficient space around the device to ensure good ventilation.\u003c\/li\u003e\n\u003cli data-end=\"2096\" data-start=\"2042\"\u003eAvoid areas prone to water splashing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2305\" data-start=\"2238\"\u003eInstallation is quick and requires only standard tools.\u003c\/p\u003e","brand":"Poolex","offers":[{"title":"Default Title","offer_id":53142662185297,"sku":"CL-TSLFIX","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/SupportdefixationpourelectrolyseurauselPoolexTurboSalt_Sel-In.png?v=1772027893"},{"product_id":"bouchon-de-maintenance-pour-turbo-salt-sel-in-poolex","title":"Maintenance plug for Turbo Salt \/ Sel-In Poolex","description":"\u003cp data-start=\"256\" data-end=\"468\"\u003eThe \u003cstrong data-start=\"259\" data-end=\"332\"\u003ePoolex Turbo Salt and Sel-In electrolyser maintenance cap\u003c\/strong\u003e is an original manufacturer's spare part, specially designed to facilitate the maintenance and cleaning of the electrolysis cell.\u003c\/p\u003e\n\u003cp data-start=\"470\" data-end=\"759\"\u003eIt allows the cell to be isolated during maintenance operations, particularly during \u003cstrong data-start=\"557\" data-end=\"571\"\u003edescaling\u003c\/strong\u003e, by ensuring a perfectly watertight seal. Essential for extending the life of your salt electrolyser, this cap guarantees simple, safe and effective maintenance.\u003c\/p\u003e\n\u003cp data-start=\"470\" data-end=\"759\"\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"4\"\u003eWhy use the Poolex maintenance cap?\u003c\/h2\u003e\n\u003cp data-path-to-node=\"5\"\u003eMaintaining a salt electrolyser is key to its longevity. The \u003cb data-path-to-node=\"5\" data-index-in-node=\"69\"\u003eofficial Poolex maintenance cap (ref. CL-TSLPLG)\u003c\/b\u003e has been specially designed to allow you to isolate your hydraulic circuit or clean your cell with ease.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eWhether for winterizing your pool or for periodic descaling, this cap ensures a perfect seal and avoids having to empty part of your filtration circuit.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"7\"\u003eKey advantages of this product\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eSecure wintering:\u003c\/b\u003e allows you to plug the cell's location during winter, protecting the device from frost and bad weather while keeping the circuit closed.\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\" style=\"font-family: -apple-system, BlinkMacMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eEasy cleaning:\u003c\/b\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e ideal for performing a cleaning bath (diluted acid) directly in the cell to remove limescale without damaging the rest of your installation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\" style=\"font-family: -apple-system, BlinkMacMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eGuaranteed watertightness:\u003c\/b\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e designed with resistant materials and a precise thread to prevent any water leakage during handling.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-path-to-node=\"8,0,0\"\u003e\n\u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"0\" style=\"font-family: -apple-system, BlinkMacMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eSimple installation:\u003c\/b\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e screws on manually in a few seconds in place of the cell or original fittings.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"14\"\u003eUser guide: how to use it correctly?\u003c\/h2\u003e\n\u003col\u003e\n\u003cli data-path-to-node=\"15,0,0\"\u003e\n\u003cb data-path-to-node=\"15,0,0\" data-index-in-node=\"0\"\u003eFor winterizing:\u003c\/b\u003e once the season is over, unscrew your Turbo Salt or Sel-In cell to store it in a dry place. Replace it with the maintenance cap to maintain the watertightness of your plumbing if you leave your filtration running (active wintering).\u003c\/li\u003e\n\u003cli data-path-to-node=\"15,0,0\"\u003e\n\u003cb data-path-to-node=\"15,1,0\" data-index-in-node=\"0\"\u003eFor descaling:\u003c\/b\u003e screw the cap onto one side of the cell. Pour your cleaning solution inside. Leave to act for the necessary time, then rinse. Your cell will regain its original performance!\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Poolex","offers":[{"title":"Default Title","offer_id":53143152492881,"sku":"CL-TSLCAP","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/BouchondemaintenancepourTurboSaltSel-In.png?v=1772029042"},{"product_id":"tube-dhivernage-pour-electrolyseur-au-sel-turbo-salt-sel-in-poolex","title":"Winterizing Tube for Turbo Salt \/ Sel-In Poolex Salt Chlorinators","description":"\u003cp\u003eThe \u003cstrong\u003ePoolex Turbo Salt and Sel-In salt chlorinator winterizing tube\u003c\/strong\u003e is a genuine manufacturer's spare part, specially designed to replace the cell when winterizing your pool.\u003c\/p\u003e\n\u003cp\u003eWhen temperatures drop, it is essential to remove the treatment cell and store it away from frost. This replacement tube is precisely installed in place of your cell, thus maintaining the continuity of your hydraulic circuit and allowing your filtration to operate (active winterization) without risking damage to your disinfection equipment.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eWhy invest in this winterizing tube?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEquipment preservation:\u003c\/b\u003e prevents the titanium plates of your cell from being exposed to extreme temperatures and concentrated winter treatment products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFiltration continuity:\u003c\/b\u003e allows water to circulate normally through your pipes, thus preventing stagnation and freezing in the pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSimplified installation:\u003c\/b\u003e designed to exactly match the center distance of the original cell. Replacement takes only a few seconds, without modifying your plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePerfect sealing:\u003c\/b\u003e made of high-resistance PVC, it guarantees a complete absence of leaks throughout the winter period.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eUsage \u0026amp; maintenance tips\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cb\u003eDisassembly:\u003c\/b\u003e once the water temperature drops below 12-15°C, turn off your chlorinator and unscrew the cell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStorage:\u003c\/b\u003e clean your cell (with the appropriate maintenance cap) and store it in a dry, frost-free place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e install the winterizing tube in place of the cell using the original clamping rings. Make sure the gaskets are correctly positioned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRestart:\u003c\/b\u003e in spring, as soon as the water temperature rises, simply replace the tube with your clean cell.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Poolex","offers":[{"title":"Default Title","offer_id":53143762403665,"sku":"CL-TSLTUBE","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Tubed_hivernagepourelectrolyseurauselTurboSaltSel-InPoolex.png?v=1772030844"},{"product_id":"cellule-delectrolyseur-pooleasy-salt-avady-45-m","title":"Electrolyzer Cell Pooleasy Salt 9 g\/h Avady - 45 m³","description":"\u003cp data-end=\"494\" data-start=\"192\"\u003eIs your Avady POOLeasy® or ProPilot salt chlorinator no longer producing enough chlorine or showing a wear message? There's no need to change your entire equipment! Revive your water treatment system by simply replacing the \u003cstrong data-end=\"493\" data-start=\"450\"\u003e9 g\/h electrolysis cell (3 plates)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-end=\"765\" data-start=\"496\"\u003eWe offer the official replacement cell (electrode), designed to perfectly fit your existing housing. Made with high-quality titanium plates, it ensures optimal, stable, and constant disinfection of your pool water.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e4 sizes available: choose the model suitable for your pool\u003c\/h2\u003e\n\u003cp\u003eTo precisely match the power of your current Avady housing, this cell is available in 4 versions based on the number of plates. Check the reference of your old cell, its production (g\/h), or the volume of your pool to make the right choice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e3-plate model (9 g\/h):\u003c\/b\u003e Ideal for small pools up to \u003cb\u003e45 m³\u003c\/b\u003e. \u003ci\u003eProduction: 9 g\/h (in Normal Salt) \/ 7 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5-plate model (16 g\/h):\u003c\/b\u003e Designed for medium pools up to \u003cb\u003e80 m³\u003c\/b\u003e. \u003ci\u003eProduction: 16 g\/h (in Normal Salt) \/ 12 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7-plate model (26 g\/h):\u003c\/b\u003e Perfect for large pools up to \u003cb\u003e130 m³\u003c\/b\u003e. \u003ci\u003eProduction: 26 g\/h (in Normal Salt) \/ 18 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e9-plate model (35 g\/h):\u003c\/b\u003e Reserved for very large pools up to \u003cb\u003e175 m³\u003c\/b\u003e. \u003ci\u003eProduction: 35 g\/h (in Normal Salt) \/ 29 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChlorine production\u003c\/th\u003e\n\u003cth\u003ePool volume\u003c\/th\u003e\n\u003cth\u003eNumber of plates\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 9 g\/h (LS 7 g\/h)\u003c\/td\u003e\n\u003ctd\u003e9 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 45 m³\u003c\/td\u003e\n\u003ctd\u003e3 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 16 g\/h (LS 12 g\/h)\u003c\/td\u003e\n\u003ctd\u003e16 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 80 m³\u003c\/td\u003e\n\u003ctd\u003e5 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 26 g\/h (LS 18 g\/h)\u003c\/td\u003e\n\u003ctd\u003e26 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 130 m³\u003c\/td\u003e\n\u003ctd\u003e7 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 35 g\/h (LS 29 g\/h)\u003c\/td\u003e\n\u003ctd\u003e35 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 175 m³\u003c\/td\u003e\n\u003ctd\u003e9 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey features of the Avady replacement cell\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCertified Original Equipment Manufacturer (OEM) part:\u003c\/b\u003e Specifically designed by the manufacturer for the POOLeasy® and ProPilot ranges. You are guaranteed 100% absolute compatibility, with no modification to your existing plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\"Plug \u0026amp; Play\" installation:\u003c\/b\u003e Replacing the cell is extremely simple and quick. Simply unscrew the fittings of the old, worn electrode and connect the new one to restart chlorine production instantly. No need to call a professional!\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-performance titanium plates:\u003c\/b\u003e The heart of the cell is composed of ruthenium-treated titanium plates. This high-end material offers exceptional corrosion resistance and ensures optimal electrolytic efficiency in the long term.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImmediate visual control:\u003c\/b\u003e Thanks to its fully transparent \"T\" body, you can check at a glance the proper gas production (fine bubbles) and the cleanliness of the plates, without having to dismantle the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimized maintenance (Self-cleaning):\u003c\/b\u003e Coupled with your control unit, this cell utilizes polarity reversal technology. It automatically detaches limescale deposits, thus extending its lifespan even in regions with very hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHybrid Technology (Low Salt \/ Normal Salt):\u003c\/b\u003e This electrode is ultra-versatile. It is capable of generating chlorine stably with both standard salt levels and \"Low Salinity\" treatment (from 1.5 g\/L).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhy choose this cell for your Avady chlorinator?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTransparent and practical body:\u003c\/b\u003e The transparent T-design of the cell allows you to check the condition of the titanium plates and gas (chlorine) production at a glance. In addition, its format easily accommodates a flow detector (optional) and allows for pH injection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSelf-cleaning operation:\u003c\/b\u003e No more intensive manual descaling! This cell works with the polarity inversion of your Avady unit, allowing it to self-clean and drastically increase its lifespan, even in regions with hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNormal Salt (NS) \/ Low Salt (LS) versatility:\u003c\/b\u003e The cell is capable of operating optimally with standard salt levels, but it is also perfectly compatible with \"Low Salinity\" installations (operating from 1.5 g\/l of salt).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstant production:\u003c\/b\u003e The electrode ensures stable chlorine creation even when water conditions or salinity vary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCompatibility of the replacement cell\u003c\/h2\u003e\n\u003cp\u003eThis replacement electrode is exclusively compatible with Avady brand salt treatment systems (also derived from PoolTechnologie technologies):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAvady POOLeasy® Salt\u003c\/b\u003e (models 9, 16, 26 and 35)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eAvady Propilot® Salt \/ pH\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhen should you change your chlorinator cell?\u003c\/h2\u003e\n\u003cp\u003eThe cell is the main \"consumable\" of your chlorinator. Its lifespan is generally several seasons (depending on maintenance and usage). You should consider replacing it if:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eYour water becomes cloudy or green even though the salt level, pH, and filtration time are correct.\u003c\/li\u003e\n\u003cli\u003eYour Avady unit displays an error related to production or lack of salt (even though there is enough in the pool).\u003c\/li\u003e\n\u003cli\u003eThe titanium plates inside the cell are visually very scaled irreversibly, damaged, or shortened by chemical wear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReplacing only the cell of your \u003cb\u003eAvady POOLeasy® or ProPilot\u003c\/b\u003e chlorinator is the most economical and ecological solution to restore healthy and crystalline swimming water. By choosing this original replacement part, you are guaranteed perfect compatibility with your current installation and an immediate restart of your salt treatment.\u003c\/p\u003e\n\u003cp\u003eDon't let a worn-out cell compromise the quality of your water: \u003cb\u003eselect the size adapted to your pool volume and restore your pool's full disinfection efficiency!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e(Note: This product is for the replacement cell only. The chlorinator control unit is not included).\u003c\/i\u003e\u003c\/p\u003e","brand":"AVADY","offers":[{"title":"Default Title","offer_id":53372982952273,"sku":"AVA-450-0021","price":579.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/CelluleelectrolyseurPooleasySaltAvadyPoolplanet.png?v=1774348056"},{"product_id":"cellule-delectrolyseur-pooleasy-salt-avady-16-g-h-5-plaques-80-m","title":"Electrolyser cell Pooleasy Salt Avady 16 g\/h (5 plates) - 80 m³","description":"\u003cp data-end=\"1322\" data-start=\"1094\"\u003eIs your Avady POOLeasy® or ProPilot salt chlorinator no longer producing enough chlorine? Choose the \u003cstrong data-end=\"1243\" data-start=\"1197\"\u003e16 g\/h replacement cell (5 plates)\u003c\/strong\u003e and restore optimal water quality without replacing your entire device.\u003c\/p\u003e\n\u003cp data-end=\"1507\" data-start=\"1324\"\u003eThis official Avady cell is designed for perfect compatibility with your existing system. Its titanium plates ensure reliable and long-lasting chlorine production.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e4 sizes available: choose the model suited to your pool\u003c\/h2\u003e\n\u003cp\u003eTo exactly match the power of your current Avady unit, this cell comes in 4 versions based on the number of plates. Check the reference of your old cell, its production (g\/h) or the volume of your pool to make the right choice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e3-plate model (9 g\/h):\u003c\/b\u003e Ideal for small pools up to \u003cb\u003e45 m³\u003c\/b\u003e. \u003ci\u003eProduction: 9 g\/h (Normal Salt) \/ 7 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5-plate model (16 g\/h):\u003c\/b\u003e Designed for medium pools up to \u003cb\u003e80 m³\u003c\/b\u003e. \u003ci\u003eProduction: 16 g\/h (Normal Salt) \/ 12 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7-plate model (26 g\/h):\u003c\/b\u003e Perfect for large pools up to \u003cb\u003e130 m³\u003c\/b\u003e. \u003ci\u003eProduction: 26 g\/h (Normal Salt) \/ 18 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e9-plate model (35 g\/h):\u003c\/b\u003e Reserved for very large pools up to \u003cb\u003e175 m³\u003c\/b\u003e. \u003ci\u003eProduction: 35 g\/h (Normal Salt) \/ 29 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChlorine production\u003c\/th\u003e\n\u003cth\u003ePool volume\u003c\/th\u003e\n\u003cth\u003eNumber of plates\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 9 g\/h (LS 7 g\/h)\u003c\/td\u003e\n\u003ctd\u003e9 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 45 m³\u003c\/td\u003e\n\u003ctd\u003e3 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 16 g\/h (LS 12 g\/h)\u003c\/td\u003e\n\u003ctd\u003e16 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 80 m³\u003c\/td\u003e\n\u003ctd\u003e5 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 26 g\/h (LS 18 g\/h)\u003c\/td\u003e\n\u003ctd\u003e26 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 130 m³\u003c\/td\u003e\n\u003ctd\u003e7 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 35 g\/h (LS 29 g\/h)\u003c\/td\u003e\n\u003ctd\u003e35 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 175 m³\u003c\/td\u003e\n\u003ctd\u003e9 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey features of the Avady replacement cell\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCertified original part (OEM):\u003c\/b\u003e Specifically designed by the manufacturer for the POOLeasy® and ProPilot ranges. You are guaranteed 100% absolute compatibility, with no modification of your existing pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\"Plug \u0026amp; Play\" installation:\u003c\/b\u003e Replacing the cell is extremely simple and fast. Simply unscrew the fittings of the old, worn electrode and connect the new one to restart chlorine production instantly. No need to call a professional!\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-performance titanium plates:\u003c\/b\u003e The core of the cell consists of ruthenium-treated titanium plates. This high-end material offers exceptional corrosion resistance and ensures optimal electrolytic efficiency in the long term.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImmediate visual control:\u003c\/b\u003e Thanks to its fully transparent \"T\" shaped body, you can check at a glance the proper gas production (fine bubbles) and the cleanliness of the plates, without having to dismantle the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimized maintenance (Self-cleaning):\u003c\/b\u003e Coupled with your control unit, this cell utilizes reverse polarity technology. It automatically detaches calcium deposits, thus extending its lifespan even in regions with very hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHybrid Technology (Low Salt \/ Normal Salt):\u003c\/b\u003e This electrode is ultra-versatile. It is capable of generating chlorine stably with both a standard salt level and a \"Low Salinity\" treatment (from 1.5 g\/L).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhy choose this cell for your Avady chlorinator?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTransparent and practical body:\u003c\/b\u003e The transparent T-design of the cell allows you to check the condition of the titanium plates and gas (chlorine) production at a glance. In addition, its format allows for easy housing of an optional flow detector and connecting a pH injection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSelf-cleaning operation:\u003c\/b\u003e No more tedious manual descaling! This cell works with the reverse polarity of your Avady unit, allowing it to self-clean and drastically extend its lifespan, even in regions with hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNormal Salt (NS) \/ Low Salt (LS) versatility:\u003c\/b\u003e The cell is capable of operating optimally with standard salt levels, but it is also perfectly compatible with \"Low Salinity\" installations (operating from 1.5 g\/l of salt).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstant production:\u003c\/b\u003e The electrode ensures stable chlorine generation even when water conditions or salinity vary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCompatibility of the replacement cell\u003c\/h2\u003e\n\u003cp\u003eThis replacement electrode is exclusively compatible with Avady brand salt treatment systems (also derived from PoolTechnologie technologies):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAvady POOLeasy® Salt\u003c\/b\u003e (models 9, 16, 26 and 35)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eAvady Propilot® Salt \/ pH\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhen should you change your chlorinator cell?\u003c\/h2\u003e\n\u003cp\u003eThe cell is the main \"consumable\" of your chlorinator. Its lifespan is generally several seasons (depending on maintenance and use). You should consider replacing it if:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eYour water becomes cloudy or green even though the salt level, pH, and filtration time are correct.\u003c\/li\u003e\n\u003cli\u003eYour Avady unit displays an error related to production or lack of salt (even though there is enough in the pool).\u003c\/li\u003e\n\u003cli\u003eThe titanium plates inside the cell are visually very scaled irreversibly, damaged, or shortened by chemical wear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReplacing only the cell of your \u003cb\u003eAvady POOLeasy® or ProPilot\u003c\/b\u003e chlorinator is the most economical and ecological solution to regain healthy and crystal-clear bathing water. By opting for this original spare part, you are guaranteed perfect compatibility with your current installation and immediate restart of your salt treatment.\u003c\/p\u003e\n\u003cp\u003eDon't let a worn cell compromise your water quality: \u003cb\u003eselect the size suitable for your pool volume and restore your pool's full disinfection efficiency!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e(Warning: This product is only the replacement cell. The chlorinator control unit is not included).\u003c\/i\u003e\u003c\/p\u003e","brand":"AVADY","offers":[{"title":"Default Title","offer_id":53373657776465,"sku":"AVA-450-0022","price":779.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/CelluleelectrolyseurPooleasySaltAvadyPoolplanet.png?v=1774348056"},{"product_id":"cellule-delectrolyseur-pooleasy-salt-avady-26-g-h-7-plaques-jusqua-130-m","title":"Electrolyzer cell Pooleasy Salt Avady 26 g\/h (7 plates) - up to 130 m³","description":"\u003cp data-start=\"1790\" data-end=\"1976\"\u003eIs your Avady salt chlorinator no longer producing enough chlorine? Replace only the cell with this \u003cstrong data-start=\"1904\" data-end=\"1926\"\u003e26 g\/h (7 plates)\u003c\/strong\u003e model and extend the life of your equipment.\u003c\/p\u003e\n\u003cp data-start=\"1978\" data-end=\"2110\"\u003eThis original replacement cell guarantees consistent chlorine production thanks to its high-performance titanium plates.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003ePerfect for large pools, this model ensures a production of \u003cstrong data-start=\"2240\" data-end=\"2269\"\u003e26 g\/h (NS) \/ 18 g\/h (LS)\u003c\/strong\u003e for optimal treatment up to 130 m³.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e4 available sizes: choose the model that suits your pool\u003c\/h2\u003e\n\u003cp\u003eTo perfectly match the power of your current Avady unit, this cell comes in 4 versions based on the number of plates. Check the reference of your old cell, its production (g\/h), or the volume of your pool to make the right choice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e3-plate model (9 g\/h):\u003c\/b\u003e Ideal for small pools up to \u003cb\u003e45 m³\u003c\/b\u003e. \u003ci\u003eProduction: 9 g\/h (Normal Salt) \/ 7 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5-plate model (16 g\/h):\u003c\/b\u003e Designed for medium pools up to \u003cb\u003e80 m³\u003c\/b\u003e. \u003ci\u003eProduction: 16 g\/h (Normal Salt) \/ 12 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7-plate model (26 g\/h):\u003c\/b\u003e Perfect for large pools up to \u003cb\u003e130 m³\u003c\/b\u003e. \u003ci\u003eProduction: 26 g\/h (Normal Salt) \/ 18 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e9-plate model (35 g\/h):\u003c\/b\u003e Reserved for very large pools up to \u003cb\u003e175 m³\u003c\/b\u003e. \u003ci\u003eProduction: 35 g\/h (Normal Salt) \/ 29 g\/h (Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChlorine production\u003c\/th\u003e\n\u003cth\u003ePool volume\u003c\/th\u003e\n\u003cth\u003eNumber of plates\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 9 g\/h (LS 7 g\/h)\u003c\/td\u003e\n\u003ctd\u003e9 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 45 m³\u003c\/td\u003e\n\u003ctd\u003e3 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 16 g\/h (LS 12 g\/h)\u003c\/td\u003e\n\u003ctd\u003e16 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 80 m³\u003c\/td\u003e\n\u003ctd\u003e5 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 26 g\/h (LS 18 g\/h)\u003c\/td\u003e\n\u003ctd\u003e26 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 130 m³\u003c\/td\u003e\n\u003ctd\u003e7 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 35 g\/h (LS 29 g\/h)\u003c\/td\u003e\n\u003ctd\u003e35 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 175 m³\u003c\/td\u003e\n\u003ctd\u003e9 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey features of the Avady replacement cell\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCertified Original Equipment Manufacturer (OEM) part:\u003c\/b\u003e Specifically designed by the manufacturer for the POOLeasy® and ProPilot ranges. You are guaranteed 100% absolute compatibility, without any modification to your existing piping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\"Plug \u0026amp; Play\" installation:\u003c\/b\u003e Replacing the cell is extremely simple and quick. Just unscrew the fittings of the old, worn electrode and plug in the new one to restart chlorine production instantly. No need to call a professional!\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-performance titanium plates:\u003c\/b\u003e The core of the cell is composed of titanium plates treated with ruthenium. This high-end material offers exceptional corrosion resistance and ensures optimal electrolytic efficiency in the long term.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImmediate visual control:\u003c\/b\u003e Thanks to its fully transparent \"T\" body, you can check at a glance the proper gas production (fine bubbles) and the cleanliness of the plates, without having to dismantle the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimized maintenance (Self-cleaning):\u003c\/b\u003e Coupled with your control unit, this cell uses polarity reversal technology. It automatically detaches limescale deposits, thus extending its lifespan even in regions with very hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHybrid Technology (Low Salt \/ Normal Salt):\u003c\/b\u003e This electrode is ultra-versatile. It is capable of stable chlorine generation with both standard salt levels and \"Low Salinity\" treatment (from 1.5 g\/L).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhy choose this cell for your Avady salt chlorinator?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTransparent and practical body:\u003c\/b\u003e The transparent T-shaped design of the cell allows for a quick visual check of the titanium plates and gas (chlorine) production. Furthermore, its format easily accommodates a flow detector (optional) and allows for pH injection connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSelf-cleaning operation:\u003c\/b\u003e No more intensive manual descaling! This cell works with the polarity reversal of your Avady control unit, allowing it to self-clean and drastically increase its lifespan, even in hard water regions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNormal Salt (NS) \/ Low Salt (LS) versatility:\u003c\/b\u003e The cell is capable of operating optimally with standard salt levels, but it is also perfectly compatible with \"Low Salinity\" installations (operating from 1.5 g\/l of salt).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstant production:\u003c\/b\u003e The electrode ensures stable chlorine creation even when water conditions or salinity vary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eReplacement cell compatibility\u003c\/h2\u003e\n\u003cp\u003eThis replacement electrode is exclusively compatible with Avady brand salt treatment systems (also from PoolTechnologie technologies):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAvady POOLeasy® Salt\u003c\/b\u003e (models 9, 16, 26, and 35)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eAvady Propilot® Salt \/ pH\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhen should you change your chlorinator cell?\u003c\/h2\u003e\n\u003cp\u003eThe cell is the main \"consumable\" of your chlorinator. Its lifespan is generally several seasons (depending on maintenance and usage). You should consider replacing it if:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eYour water becomes cloudy or green even though the salt level, pH, and filtration time are correct.\u003c\/li\u003e\n\u003cli\u003eYour Avady unit displays an error related to production or lack of salt (even though there is enough in the pool).\u003c\/li\u003e\n\u003cli\u003eThe titanium plates inside the cell are visibly very scaled irreversibly, damaged, or shortened by chemical wear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReplacing only the cell of your \u003cb\u003eAvady POOLeasy® or ProPilot\u003c\/b\u003e chlorinator is the most economical and ecological solution to restore healthy and crystal-clear bathing water. By opting for this original replacement part, you are guaranteed perfect compatibility with your current installation and an immediate restart of your salt treatment.\u003c\/p\u003e\n\u003cp\u003eDon't let a worn-out cell compromise the quality of your water: \u003cb\u003eselect the size adapted to your pool volume and restore your pool's full disinfection efficiency!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e(Please note: This product is for the replacement cell only. The chlorinator control unit is not included).\u003c\/i\u003e\u003c\/p\u003e","brand":"AVADY","offers":[{"title":"Default Title","offer_id":53373740450129,"sku":"AVA-450-0023","price":999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/CelluleelectrolyseurPooleasySaltAvadyPoolplanet.png?v=1774348056"},{"product_id":"cellule-delectrolyseur-pooleasy-salt-35-g-h-9-plaques-avady-jusqu-a-175-m","title":"Avady Pooleasy Salt Electrolyzer Cell 35 g\/h (9 plates) - up to 175 m³","description":"\u003cp data-start=\"2404\" data-end=\"2608\"\u003eIs your salt chlorinator system showing signs of weakness? Opt for the \u003cstrong data-start=\"2486\" data-end=\"2516\"\u003e35 g\/h cell (9 plates)\u003c\/strong\u003e to regain powerful and consistent disinfection without replacing the entire chlorinator.\u003c\/p\u003e\n\u003cp data-start=\"2610\" data-end=\"2741\"\u003eMade of treated titanium, this cell guarantees performance, durability, and perfect compatibility with your Avady system.\u003c\/p\u003e\n\u003cp data-start=\"2801\" data-end=\"2926\"\u003eDesigned for very large pools, this model delivers \u003cstrong data-start=\"2852\" data-end=\"2881\"\u003e35 g\/h (NS) \/ 29 g\/h (LS)\u003c\/strong\u003e for maximum efficiency up to 175 m³.\u003c\/p\u003e\n\u003cp data-start=\"2801\" data-end=\"2926\"\u003e \u003c\/p\u003e\n\u003ch2\u003e4 available sizes: choose the model suited to your pool\u003c\/h2\u003e\n\u003cp\u003eTo precisely match the power of your current Avady control unit, this cell comes in 4 versions based on the number of plates. Check the reference of your old cell, its production (g\/h), or the volume of your pool to make the right choice:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e3-plate model (9 g\/h):\u003c\/b\u003e Ideal for small pools up to \u003cb\u003e45 m³\u003c\/b\u003e. \u003ci\u003eProduction: 9 g\/h (in Normal Salt) \/ 7 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5-plate model (16 g\/h):\u003c\/b\u003e Designed for medium pools up to \u003cb\u003e80 m³\u003c\/b\u003e. \u003ci\u003eProduction: 16 g\/h (in Normal Salt) \/ 12 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7-plate model (26 g\/h):\u003c\/b\u003e Perfect for large pools up to \u003cb\u003e130 m³\u003c\/b\u003e. \u003ci\u003eProduction: 26 g\/h (in Normal Salt) \/ 18 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e9-plate model (35 g\/h):\u003c\/b\u003e Reserved for very large pools up to \u003cb\u003e175 m³\u003c\/b\u003e. \u003ci\u003eProduction: 35 g\/h (in Normal Salt) \/ 29 g\/h (in Low Salt).\u003c\/i\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChlorine production\u003c\/th\u003e\n\u003cth\u003ePool volume\u003c\/th\u003e\n\u003cth\u003eNumber of plates\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 9 g\/h (LS 7 g\/h)\u003c\/td\u003e\n\u003ctd\u003e9 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 45 m³\u003c\/td\u003e\n\u003ctd\u003e3 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 16 g\/h (LS 12 g\/h)\u003c\/td\u003e\n\u003ctd\u003e16 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 80 m³\u003c\/td\u003e\n\u003ctd\u003e5 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 26 g\/h (LS 18 g\/h)\u003c\/td\u003e\n\u003ctd\u003e26 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 130 m³\u003c\/td\u003e\n\u003ctd\u003e7 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePooleasy Salt 35 g\/h (LS 29 g\/h)\u003c\/td\u003e\n\u003ctd\u003e35 g\/h\u003c\/td\u003e\n\u003ctd\u003eup to 175 m³\u003c\/td\u003e\n\u003ctd\u003e9 plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eHighlights of the Avady replacement cell\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCertified Original Equipment Manufacturer (OEM) part:\u003c\/b\u003e Specifically designed by the manufacturer for the POOLeasy® and ProPilot ranges. You are guaranteed 100% absolute compatibility, with no modification to your existing piping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\"Plug \u0026amp; Play\" installation:\u003c\/b\u003e Replacing the cell is extremely simple and quick. Simply unscrew the fittings of the old used electrode and plug in the new one to restart chlorine production instantly. No need to call a professional!\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-performance titanium plates:\u003c\/b\u003e The heart of the cell is composed of ruthenium-treated titanium plates. This high-end material offers exceptional corrosion resistance and ensures optimal electrolytic performance over the long term.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eImmediate visual check:\u003c\/b\u003e Thanks to its completely transparent \"T\" body, you can check at a glance the proper gas production (fine bubbles) and the cleanliness of the plates, without having to dismantle the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimized maintenance (Self-cleaning):\u003c\/b\u003e Coupled with your control unit, this cell uses reverse polarity technology. It automatically detaches limescale deposits, thus extending its lifespan even in areas with very hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHybrid Technology (Low Salt \/ Normal Salt):\u003c\/b\u003e This electrode is ultra-versatile. It is capable of generating chlorine stably with both a standard salt level and \"Low Salinity\" treatment (from 1.5 g\/L).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhy choose this cell for your Avady chlorinator?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTransparent and practical body:\u003c\/b\u003e The transparent T-design of the cell allows for a quick visual check of the titanium plates and gas (chlorine) production. In addition, its format allows for easy housing of an optional flow detector and connection of pH injection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSelf-cleaning function:\u003c\/b\u003e No more intensive manual descaling! This cell works with the reverse polarity of your Avady control unit, which allows it to self-clean and drastically increase its lifespan, even in regions with hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNormal Salt (NS) \/ Low Salt (LS) versatility:\u003c\/b\u003e The cell is capable of operating optimally with standard salt levels, but it is also perfectly compatible with \"Low Salinity\" installations (operating from 1.5 g\/l of salt).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstant production:\u003c\/b\u003e The electrode ensures stable chlorine creation even when water conditions or salinity vary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eReplacement cell compatibility\u003c\/h2\u003e\n\u003cp\u003eThis replacement electrode is exclusively compatible with Avady brand salt chlorinator systems (also derived from PoolTechnologie technologies):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAvady POOLeasy® Salt\u003c\/b\u003e (models 9, 16, 26 and 35)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eAvady Propilot® Salt \/ pH\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eWhen should you change your chlorinator cell?\u003c\/h2\u003e\n\u003cp\u003eThe cell is the main \"consumable\" of your chlorinator. Its lifespan is generally several seasons (depending on maintenance and use). You should consider replacing it if:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eYour water becomes cloudy or green even though the salt level, pH, and filtration time are correct.\u003c\/li\u003e\n\u003cli\u003eYour Avady unit displays an error related to production or lack of salt (even though there is enough in the pool).\u003c\/li\u003e\n\u003cli\u003eThe titanium plates inside the cell are visually very scaled irreversibly, damaged, or shortened by chemical wear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReplacing only the cell of your \u003cb\u003eAvady POOLeasy® or ProPilot\u003c\/b\u003e chlorinator is the most economical and ecological solution to restore healthy and crystal-clear swimming water. By opting for this original spare part, you are guaranteed perfect compatibility with your current installation and an immediate restart of your salt treatment.\u003c\/p\u003e\n\u003cp\u003eDon't let a worn-out cell compromise the quality of your water: \u003cb\u003eselect the size appropriate for your pool volume and restore your pool's full disinfection efficiency!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e(Please note: This product is for the replacement cell only. The chlorinator control unit is not included).\u003c\/i\u003e\u003c\/p\u003e","brand":"AVADY","offers":[{"title":"Default Title","offer_id":53373788455249,"sku":"AVA-450-0024","price":1239.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/CelluleelectrolyseurPooleasySaltAvadyPoolplanet.png?v=1774348056"},{"product_id":"tube-peristaltique-pooleasy-avady","title":"POOLeasy Avady Peristaltic Tube","description":"\u003cp\u003eThe \u003cstrong\u003eAvady peristaltic tube\u003c\/strong\u003e is an essential replacement part for ensuring the proper functioning of your pH or Redox dosing pump.\u003c\/p\u003e\n\u003cp\u003eInstalled in the pump head, this flexible tube allows for the precise suction and injection of treatment products (pH-, liquid chlorine, active oxygen) to guarantee perfectly balanced water.\u003c\/p\u003e\n\u003cp\u003eOver time, this tube naturally wears out due to repeated compressions from the rollers and contact with chemical products. Regular replacement is essential to maintain reliable dosing and avoid malfunctions.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision:\u003c\/b\u003e ensures a constant injection volume for perfect water balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResistance:\u003c\/b\u003e Santoprene is specifically chosen for its resistance to sulfuric acid (pH-) and sodium hypochlorite (chlorine).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSimplified installation:\u003c\/b\u003e supplied with pre-mounted fittings for quick, tool-free replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eMaintenance and installation tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement frequency:\u003c\/b\u003e it is strongly recommended to change the tube \u003cb\u003eevery year\u003c\/b\u003e (at the start of the season) to avoid any rupture that could damage the pump motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubrication:\u003c\/b\u003e when replacing, apply a thin layer of \u003cb\u003esilicone grease\u003c\/b\u003e to the tube to reduce friction with the rollers and extend its lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWinterization:\u003c\/b\u003e during winterization, it is advisable to release the tube from the pressure of the rollers or rinse it with clear water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis tube is compatible with most \u003cb\u003eAvady Pool devices manufactured after January 2016\u003c\/b\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePOOLeasy range:\u003c\/b\u003e POOLeasy pH \/ POOLeasy Rx\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePRIM range:\u003c\/b\u003e Prim pH \/ Prim Rx \/ Prim Evol\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePROpilot range:\u003c\/b\u003e Propilot pH-Rx \/ Propilot pH-Rx 1.5L and 3L\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSTAR range:\u003c\/b\u003e Star pH \/ Star pH LCD \/ Star 20 pH LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOther models:\u003c\/b\u003e Duo pH Turboxy, Tempo UV, Périfix 1.5L\/h and 3L\/h.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2 data-end=\"1470\" data-start=\"1134\"\u003eWhy choose a Santoprene tube for your dosing pump?\u003c\/h2\u003e\n\u003cp data-end=\"1470\" data-start=\"1134\" class=\"\"\u003eSantoprene combines the flexibility of rubber with the durability of plastic, offering optimal mechanical and chemical resistance. It allows for consistent suction and precise dosing, while withstanding repeated compression cycles without cracking or premature wear.\u003c\/p\u003e\n\u003cp data-end=\"1470\" data-start=\"1134\" class=\"\"\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eRegularly replacing your \u003cstrong\u003eAvady peristaltic tube\u003c\/strong\u003e is a simple yet essential step to guarantee the reliability and longevity of your regulation system. By choosing a suitable and quality replacement part, you ensure precise dosing of treatment products and maintain your water's balance in the long term.\u003c\/p\u003e\n\u003cp\u003eRegular maintenance guarantees a healthy pool, protected equipment, and uninterrupted operation throughout the season.\u003c\/p\u003e","brand":"AVADY","offers":[{"title":"Default Title","offer_id":53373951639889,"sku":"ADSP8000102","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Tube_peristaltique_POOLesay_Avady_Poolplanet.png?v=1774354519"},{"product_id":"clapet-dinjection-pour-pompe","title":"Injection valve for Avady dosing pump","description":"\u003cp\u003eThe \u003cstrong\u003eAvady 1\/2\" (4x6 mm) injection valve\u003c\/strong\u003e is an essential component for the proper functioning of your automatic pH or Redox regulation system.\u003c\/p\u003e\n\u003cp\u003eInstalled on the pipe, it allows precise injection of treatment products (pH-, liquid chlorine, anti-algae, etc.) directly into your pool water, while preventing water from flowing back to the dosing pump.\u003c\/p\u003e\n\u003cp\u003eThanks to its non-return system, this valve protects your installation against the risks of overpressure, corrosion, and malfunction, while ensuring homogeneous diffusion of the product in the pool.\u003c\/p\u003e\n\u003cp\u003eThe valve acts as a \u003cstrong\u003enon-return valve\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eit allows the injected product to pass into the pipe\u003c\/li\u003e\n\u003cli\u003eit prevents water from flowing back to the pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e👉 Result: precise, secure, and constant dosing for perfectly balanced water.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum safety:\u003c\/b\u003e Equipped with a non-return device to protect your installation and your dosing pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh resistance:\u003c\/b\u003e Made from robust materials to resist acids (pH-) and liquid chlorine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy installation:\u003c\/b\u003e Standard 1\/2\" male connection for direct screwing onto the clamp saddle or sensor holder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOriginal part:\u003c\/b\u003e Ensures perfect compatibility with AVADY brand devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis injection valve is specifically designed for peristaltic pumps using a \u003cb\u003e4x6 mm\u003c\/b\u003e connection tube (4 mm inner diameter \/ 6 mm outer diameter).\u003c\/p\u003e\n\u003cp\u003eIt is compatible with the following regulators:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAVADY:\u003c\/b\u003e Prim Evol (pH and Redox), Turboxy Duo, Prim pH, Prim Rx.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOther models:\u003c\/b\u003e Compatible with any dosing pump using a 4x6 hose and a 1\/2\" connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Avady injection valve is an indispensable component for ensuring the safety and performance of your automatic treatment system. Easy to install and reliable, it guarantees precise injection of products while durably protecting your equipment.\u003c\/p\u003e","brand":"AVADY","offers":[{"title":"Default Title","offer_id":53374195597649,"sku":"AVA-451-0194","price":27.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Clapetd_injectionpourpompeAvadyPoolplanet.png?v=1774356448"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/collections\/bouchon_20nettoyage_20cellule__60159.png?v=1763047349","url":"https:\/\/www.poolplanet.com\/en\/collections\/traitement-pieces-detachees-traitement-de-leau.oembed","provider":"Pool Planet","version":"1.0","type":"link"}