{"title":"Pool Level Control Boxes","description":"\u003ch2 id=\"isPasted\" data-start=\"0\" data-end=\"56\"\u003e\u003cstrong data-start=\"0\" data-end=\"56\"\u003eHow does a pool level regulator work?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"58\" data-end=\"490\"\u003eA pool level regulator is an essential device connected to an \u003ca href=\"https:\/\/www.poolplanet.com\/collections\/coffrets-electriques\"\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cstrong\u003eelectrical box\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e that ensures a constant water level in your pool. Its mechanism relies on detecting the water level and automatically adjusting the necessary input to compensate for losses due to evaporation, splashing, or minor leaks. There are several types of level regulators, each with a specific mode of operation.\u003c\/p\u003e\n\u003cp data-start=\"492\" data-end=\"903\"\u003eFloat regulators are among the most common. They are equipped with a floating probe that rises and falls with the water level. When the water level drops below a certain point, the probe activates a valve that allows water to fill the pool until the optimal level is reached. Once this level is reached, the float rises and closes the valve, stopping the water supply.\u003c\/p\u003e\n\u003cp data-start=\"492\" data-end=\"903\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"905\" data-end=\"1422\"\u003eElectronic regulators, on the other hand, use probes or sensors to monitor the water level. These sensors send signals to a controller that activates or deactivates a solenoid valve as needed. For example, the Niva 5 regulator from CCEI that we offer is designed for infinity pools with a buffer tank. It uses electronic probes to detect the water level and automatically adjust the water supply, thus ensuring uniform overflow and optimal filtration.\u003c\/p\u003e\n\u003cp data-start=\"905\" data-end=\"1422\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"1424\" data-end=\"1480\"\u003e\u003cstrong data-start=\"1424\" data-end=\"1480\"\u003eWhat are the advantages of a level regulator?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"1482\" data-end=\"1943\"\u003eInstalling a level regulator in a pool offers many advantages. First, it provides increased comfort by maintaining a constant water level, thus avoiding fluctuations that could affect the aesthetics of the pool and the enjoyment of swimmers. A stable water level is also essential for the proper functioning of filtration and heating equipment, ensuring clean water at the desired temperature.\u003c\/p\u003e\n\u003cp data-start=\"1945\" data-end=\"2268\"\u003eIn addition, a level regulator contributes to safety by preventing overflows or excessively low water levels that could damage pool equipment. It also helps save water by avoiding excessive manual refilling and quickly detecting potential leaks.\u003c\/p\u003e\n\u003cp data-start=\"2270\" data-end=\"2550\"\u003eFinally, a level regulator reduces the workload associated with pool maintenance. By automating the filling process, maintenance becomes easier for owners, allowing them to fully enjoy their pool without constantly worrying about the water level and the problems it could cause.\u003c\/p\u003e\n\u003cp data-start=\"2270\" data-end=\"2550\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"2552\" data-end=\"2599\"\u003e\u003cstrong data-start=\"2552\" data-end=\"2599\"\u003eHow to install a level regulator?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"2601\" data-end=\"2786\"\u003eThe installation of a level regulator depends on the chosen device and the configuration of your pool. Here are the general steps for installing a level regulator:\u003c\/p\u003e\n\u003cp data-start=\"2601\" data-end=\"2786\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"2791\" data-end=\"3035\"\u003e\n\u003cstrong data-start=\"2791\" data-end=\"2821\"\u003eChoosing the right regulator\u003c\/strong\u003e: Select a regulator compatible with your pool type. For example, the Niva 5 is ideal for infinity pools with a buffer tank, while the RNS-2 is suitable for pools with skimmers.\u003c\/li\u003e\n\u003cli data-start=\"3040\" data-end=\"3299\"\u003e\n\u003cstrong data-start=\"3040\" data-end=\"3073\"\u003ePreparation for installation\u003c\/strong\u003e: Turn off the water and electricity supply to the pool to ensure safe installation. Identify the optimal location for the regulator.\u003c\/li\u003e\n\u003cli data-start=\"3304\" data-end=\"3639\"\u003e\n\u003cstrong data-start=\"3304\" data-end=\"3346\"\u003eInstallation of the sensor or float\u003c\/strong\u003e: For float regulators, fix the float in the appropriate place in the pool or buffer tank. For electronic regulators, install the probes according to the manufacturer's instructions, ensuring they are correctly positioned to detect the water level.\u003c\/li\u003e\n\u003cli data-start=\"3644\" data-end=\"3872\"\u003e\n\u003cstrong data-start=\"3644\" data-end=\"3672\"\u003eHydraulic connection\u003c\/strong\u003e: Connect the regulator to the pool's water supply system. This may require the installation of a valve or solenoid valve controlled by the regulator to manage the water supply.\u003c\/li\u003e\n\u003cli data-start=\"3877\" data-end=\"4086\"\u003e\n\u003cstrong data-start=\"3877\" data-end=\"3904\"\u003eElectrical connection\u003c\/strong\u003e: Connect the regulator to an electrical power source that complies with safety standards. Ensure all connections are watertight and protected against moisture.\u003c\/li\u003e\n\u003cli data-start=\"4091\" data-end=\"4361\"\u003e\n\u003cstrong data-start=\"4091\" data-end=\"4122\"\u003eCommissioning and adjustments\u003c\/strong\u003e: Once the installation is complete, restore the water and electricity supply. Test the regulator to ensure it is working correctly and adjust the settings as needed to maintain the desired water level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"4363\" data-end=\"4596\"\u003eIt is recommended to call a professional for the installation of a level regulator and its functionalities, especially if you are not familiar with hydraulic and electrical systems, to ensure a safe and efficient installation.\u003c\/p\u003e\n\u003cp data-start=\"4363\" data-end=\"4596\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"4598\" data-end=\"4641\"\u003e\u003cstrong data-start=\"4598\" data-end=\"4641\"\u003eHow to avoid water overflows?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"4643\" data-end=\"4855\"\u003eWater overflows in a pool can cause damage to surrounding structures and lead to valuable water loss. To avoid these situations, several measures can be implemented:\u003c\/p\u003e\n\u003cp data-start=\"4643\" data-end=\"4855\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"4860\" data-end=\"5078\"\u003e\u003cstrong data-start=\"4860\" data-end=\"4902\"\u003eInstallation of a level regulator\u003c\/strong\u003e: As mentioned earlier, a level regulator automatically maintains the optimal water level, thus preventing overflows caused by excessive filling.\u003c\/p\u003e\n\u003cp data-start=\"5083\" data-end=\"5350\"\u003e\u003cstrong data-start=\"5083\" data-end=\"5114\"\u003eUse of an overflow drain\u003c\/strong\u003e: An overflow system allows excess water to drain into a dedicated drain or reservoir when the level exceeds a certain limit. This is particularly useful in case of heavy rain or accidental overfilling.\u003c\/p\u003e\n\u003cp data-start=\"5355\" data-end=\"5598\"\u003e\u003cstrong data-start=\"5355\" data-end=\"5381\"\u003eRegular monitoring\u003c\/strong\u003e: Regularly inspect your pool's water level, especially after bad weather or intensive use. This will allow you to quickly detect any anomaly and take appropriate action.\u003c\/p\u003e\n\u003cp data-start=\"5603\" data-end=\"5846\"\u003e\u003cstrong data-start=\"5603\" data-end=\"5632\"\u003eEquipment maintenance\u003c\/strong\u003e: Ensure that the various equipment is working correctly. A malfunction could lead to a variation in the water level and potentially an overflow.\u003c\/p\u003e\n\u003cp data-start=\"5603\" data-end=\"5846\"\u003e\u003cstrong data-start=\"5851\" data-end=\"5876\"\u003eIrrigation management\u003c\/strong\u003e: If your pool is located near landscaped areas, ensure that irrigation devices do not contribute to an excessive water supply to the pool.\u003c\/p\u003e\n\u003cp data-start=\"5603\" data-end=\"5846\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"6037\" data-end=\"6170\"\u003eBy combining these measures, you will significantly reduce the risk of overflow and thus protect your pool and its surroundings.\u003c\/p\u003e\n\u003cp data-start=\"6037\" data-end=\"6170\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"6172\" data-end=\"6223\"\u003e\u003cstrong data-start=\"6172\" data-end=\"6223\"\u003eWhat types of level regulators exist?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"6225\" data-end=\"6347\"\u003eThere are several models of pool level regulators, each with its own characteristics and advantages:\u003c\/p\u003e\n\u003cp data-start=\"6225\" data-end=\"6347\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"6352\" data-end=\"6687\"\u003e\n\u003cstrong data-start=\"6352\" data-end=\"6378\"\u003eFloat regulators\u003c\/strong\u003e: These mechanical devices use a float that rises and falls with the water level. When the level drops, the float opens a valve to add water, and when it rises, it closes the valve. PoolPlanet's RNS-1 is an example of a float regulator suitable for skimmer pools.\u003c\/li\u003e\n\u003cli data-start=\"6692\" data-end=\"6954\"\u003e\n\u003cstrong data-start=\"6692\" data-end=\"6730\"\u003eElectronic probe regulators\u003c\/strong\u003e: These regulators use immersed probes to detect the water level. When the level drops below a predefined threshold, the device activates a solenoid valve to add water until the optimal level is reached. The Niva 5 is an example of a control box designed for infinity pools.\u003c\/li\u003e\n\u003cli data-start=\"6692\" data-end=\"6954\"\u003e\n\u003cstrong data-start=\"125\" data-end=\"163\"\u003ePressure sensor regulators\u003c\/strong\u003e: These models detect the pressure exerted by the water to measure its level. When the pressure drops due to a decrease in water level, the device activates the addition of water until the optimal pressure is reached. This type of regulator is less common but offers high precision.\u003c\/li\u003e\n\u003cli data-start=\"463\" data-end=\"767\"\u003e\n\u003cstrong data-start=\"463\" data-end=\"527\"\u003eAutomatic regulators integrated into filtration systems\u003c\/strong\u003e: Some high-end filtration equipment includes an automatic water level regulation function. This solution is particularly interesting for those who want fully centralized management of their pool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"769\" data-end=\"937\"\u003eThe choice of regulator depends on the type of pool (skimmer or overflow) as well as the user's specific needs in terms of precision and automation.\u003c\/p\u003e\n\u003cp data-start=\"769\" data-end=\"937\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"939\" data-end=\"987\"\u003e\u003cstrong data-start=\"939\" data-end=\"987\"\u003eHow to maintain a constant water level?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"989\" data-end=\"1097\"\u003eTo ensure a constant water level in a pool, several good practices must be followed:\u003c\/p\u003e\n\u003cp data-start=\"989\" data-end=\"1097\"\u003e \u003c\/p\u003e\n\u003col\u003e\n\u003cli data-start=\"1102\" data-end=\"1330\"\u003e\n\u003cstrong data-start=\"1102\" data-end=\"1139\"\u003eInstall a level regulator\u003c\/strong\u003e: This is the most effective and simplest solution to avoid water level fluctuations. A good regulator automatically compensates for water losses and prevents overflows.\u003c\/li\u003e\n\u003cli data-start=\"1335\" data-end=\"1592\"\u003e\n\u003cstrong data-start=\"1335\" data-end=\"1378\"\u003eRegularly check for water losses\u003c\/strong\u003e: Natural evaporation, splashing, and leaks can lead to a gradual drop in water level. Monitor your pool and detect any abnormal water loss that could indicate a leak.\u003c\/li\u003e\n\u003cli data-start=\"1597\" data-end=\"1795\"\u003e\n\u003cstrong data-start=\"1597\" data-end=\"1636\"\u003eProtect the pool from bad weather\u003c\/strong\u003e: In case of heavy rain, excess water can cause an overflow. A well-positioned overflow drain or a suitable cover can help avoid these situations.\u003c\/li\u003e\n\u003cli data-start=\"1800\" data-end=\"2042\"\u003e\n\u003cstrong data-start=\"1800\" data-end=\"1858\"\u003eMaintain filtration and pumping equipment\u003c\/strong\u003e: A malfunction of the pump or skimmers can affect water circulation and cause level variations. Regular maintenance ensures their proper functioning.\u003c\/li\u003e\n\u003cli data-start=\"2047\" data-end=\"2263\"\u003e\n\u003cstrong data-start=\"2047\" data-end=\"2118\"\u003eUse a buffer tank cover for infinity pools\u003c\/strong\u003e: In the case of infinity pools, a well-sized and covered buffer tank limits evaporation and improves water level management.\u003c\/li\u003e\n\u003cli data-start=\"2268\" data-end=\"2501\"\u003e\n\u003cstrong data-start=\"2268\" data-end=\"2309\"\u003eMonitor weather conditions\u003c\/strong\u003e: During hot periods, evaporation is higher. Additional water may be needed to maintain the optimal level, especially if no automatic regulator is installed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"2503\" data-end=\"2688\"\u003eBy following these recommendations, it is possible to maintain a constant water level, thus improving water quality and the proper functioning of the entire pool.\u003c\/p\u003e\n\u003cp data-start=\"2503\" data-end=\"2688\"\u003e \u003c\/p\u003e\n\u003ch2 data-start=\"2690\" data-end=\"2774\"\u003e\u003cstrong data-start=\"2690\" data-end=\"2774\"\u003eFor an infinity pool, do I have to have a level regulator?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"2776\" data-end=\"3152\"\u003eThe installation of a level regulator for an infinity pool is not strictly mandatory, but it is highly recommended. Unlike traditional pools equipped with skimmers, infinity pools require a precise balance of water level to ensure uniform overflow and avoid any disruption to the filtration system.\u003c\/p\u003e\n\u003cp data-start=\"3154\" data-end=\"3542\"\u003eWithout a regulator, the water level can fluctuate due to evaporation, splashing, or weather variations. Too low a level results in irregular overflow and can prevent water from circulating correctly to the buffer tank, thus compromising filtration and water quality. Conversely, too high a level risks causing uncontrolled overflows.\u003c\/p\u003e\n\u003cp data-start=\"3544\" data-end=\"3813\"\u003eRegulators like the Niva 5 are designed specifically for infinity pools and ensure precise water level regulation. They help avoid frequent manual adjustments and ensure optimal system operation.\u003c\/p\u003e","products":[{"product_id":"1-sonde-de-niveau-inox-pour-niva-3-5-lineo-5s-crbtrn-crnse","title":"Stainless Steel CCEI Level Probe for NIVA 3 \u0026 5, Lineo 5S, CRBTRN, CRNSE Pool Controller – 6m Cable","description":"\u003ch2\u003eCCEI Stainless Steel Level Probe: An Essential Spare Part for Your Pool Level Controller\u003c\/h2\u003e\n\u003cp\u003eThe water level controller is a key piece of equipment for maintaining a stable water line in your pool. Whether it's a skimmer pool or an overflow pool with a surge tank, the level probe is the component that detects the presence or absence of water and transmits the information to the control box. This CCEI stainless steel level probe, supplied with 6 meters of cabling, is the original spare part compatible with \u003ca href=\"https:\/\/www.poolplanet.com\/products\/regulateur-de-niveau-pour-piscine-niva-3-ccei?_pos=3\u0026amp;_psq=niva+3\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eNIVA 3\u003c\/a\u003e, \u003ca href=\"https:\/\/www.poolplanet.com\/products\/regulateur-de-niveau-pour-piscine-a-debordement-niva-5-ccei?_pos=3\u0026amp;_psq=niva+5\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eNIVA 5\u003c\/a\u003e, Lineo 5S, CRBTRN, and CRNSE control boxes.\u003c\/p\u003e\n\u003cp\u003eMade of stainless steel, it resists corrosion caused by chlorine, bromine, and salt, making it perfectly suited for pools equipped with a salt chlorinator. Its operating principle is based on electronic detection by contact or capacitance variation: when the probe is immersed, it closes a circuit that informs the control box that the water level is correct. When the level drops and the probe is exposed to air, the control box orders the filling solenoid valve to open.\u003c\/p\u003e\n\u003ch2\u003eWhy Replace a Faulty Level Probe?\u003c\/h2\u003e\n\u003cp\u003eA worn, fouled, or damaged probe cable can cause significant malfunctions in water level management. Among the most common symptoms are continuous filling that overflows the pool, a complete lack of filling that exposes the filtration pump to dry running, or erratic opening and closing cycles of the solenoid valve. In all cases, replacing the probe with an original CCEI part restores reliable and accurate operation of the controller.\u003c\/p\u003e\n\u003cp\u003eA water level that is too low causes air intake at the skimmer, which makes the filtration pump cavitate and can irreversibly damage it. Conversely, a level that is too high reduces the effectiveness of surface skimming and wastes water. The proper functioning of the probe is therefore directly linked to the protection of your equipment and the quality of filtration.\u003c\/p\u003e\n\u003ch2\u003eCompatibility with CCEI Control Boxes\u003c\/h2\u003e\n\u003cp\u003eThis stainless steel level probe is referenced as SE-1 at CCEI and can be installed on all CCEI multi-probe level control boxes. The NIVA 3 (ref. PF10L009) uses 3 probes to manage filling and pump protection for skimmer pools. The \u003ca href=\"https:\/\/www.poolplanet.com\/products\/regulateur-de-niveau-pour-piscine-a-debordement-niva-5-ccei?_pos=3\u0026amp;_psq=niva+5\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eNIVA 5\u003c\/a\u003e (ref. PF10L008) uses 5 to control filling and overflow for overflow pools with a surge tank. The CRBTRN (ref. PF10L011) performs the same functions with a more compact control box design. The Lineo 5S and CRNSE complete the range with configurations adapted to other types of installations. In all cases, the SE-1 probe is interchangeable between models.\u003c\/p\u003e\n\u003cp\u003eCaution: This probe is not compatible with the RNS-2 control box, which uses a specific 3-point probe (ref. SE-3) with a 10-meter cable. Check the exact model of your control box before ordering.\u003c\/p\u003e\n\u003ch2\u003eInstallation and Setup\u003c\/h2\u003e\n\u003cp\u003eThe probe is fixed in the skimmer or in the surge tank, depending on your pool configuration. It is positioned on a mounting rail that is screwed or glued inside the relevant water feature. The 6-meter cable connects the probe to the control box installed in the technical room. If the distance between the detection point and the technical room exceeds 6 meters, it is possible to extend the cable with an extension of suitable cross-section, ensuring waterproof connections.\u003c\/p\u003e\n\u003cp\u003eWhen replacing a faulty probe, it is recommended to cut off the power supply to the control box before intervening. Disconnect the old probe, connect the new one by observing the wire markings, then re-power the control box and check the proper functioning of the filling cycle.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and Lifespan\u003c\/h2\u003e\n\u003cp\u003eCCEI stainless steel probes have no moving mechanical parts, which gives them a particularly long lifespan, generally 10 to 15 years under normal use. Periodic cleaning of the probe tip with diluted white vinegar helps remove any scale or biofilm deposits that could impair detection sensitivity. Also check the condition of the cable and connections to the control box at the beginning of each season, especially after winterization.\u003c\/p\u003e\n\u003cp\u003ePool Planet offers this probe individually for the occasional replacement of a faulty probe, as well as in a \u003ca href=\"https:\/\/www.poolplanet.com\/collections\/pieces-detachees-pour-coffrets-electriques\/products\/5-sondes-de-niveau-inox-pour-niva-3-5-lineo-5s-crbtrn-crnse\"\u003epack of 5 to replace all probes\u003c\/a\u003e of a NIVA 5 or CRBTRN control box in a single operation.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139501748561,"sku":"SF140003","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4892-13146-0-1_Sonde_de_niveau_INOX_pour_NIVA_3_5_-CCEI__89964__52215__36781.1741076858.1280.1280.jpg?v=1760739361"},{"product_id":"5-sondes-de-niveau-inox-pour-niva-3-5-lineo-5s-crbtrn-crnse","title":"Pack of 5 CCEI Stainless Steel Level Sensors for NIVA 5, CRBTRN, Lineo 5S, CRNSE Pool Controllers – Wiring Included","description":"\u003ch2\u003ePack of 5 CCEI Stainless Steel Level Sensors: Renew Your Entire Detection System\u003c\/h2\u003e\n\n\u003cp\u003eAfter several years of service, the level sensors of your CCEI regulator can lose sensitivity due to limescale deposits, biofilm, or the natural aging of the contacts. Rather than replacing the sensors one by one as they fail, this pack of 5 CCEI SE-1 stainless steel level sensors with cabling allows you to refurbish the entire detection system in a single operation. This is the most reliable solution to start fresh and ensure homogeneous operation of all sensors.\u003c\/p\u003e\n\n\u003cp\u003eThe 5 sensors are made of stainless steel resistant to corrosion caused by chlorine, bromine, and salt. They operate by electronic detection (contact or capacitance variation), without any moving mechanical parts. This principle eliminates the risk of blockage by debris and ensures reliability for 10 to 15 years under normal use.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility with CCEI Control Boxes\u003c\/h2\u003e\n\n\u003cp\u003eThis pack of 5 SE-1 sensors is compatible with all CCEI multi-sensor level control boxes. The NIVA 5 (ref. PF10L008) uses 5 sensors to control filling, overflow, and low water safety for infinity pools with a surge tank. The CRBTRN (ref. PF10L011) performs the same functions in a compact box. The Lineo 5S and the CRNSE complete the range with configurations adapted to other types of installations.\u003c\/p\u003e\n\n\u003cp\u003eThe pack can also serve as a spare stock for NIVA 3 boxes (ref. PF10L009), which only use 3 sensors: the remaining 2 sensors then become readily available spare parts in case of future need.\u003c\/p\u003e\n\n\u003cp\u003ePlease note: these sensors are not compatible with the RNS-2 box, which uses a specific 3-point sensor (ref. SE-3) with a 10-meter cable. Check the exact model of your control box before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Replace All Sensors at Once?\u003c\/h2\u003e\n\n\u003cp\u003eWhen one sensor begins to show signs of weakness (erratic detections, continuous filling, lack of filling), it is likely that the other sensors in the same set are in a comparable state of wear. Replacing only the faulty sensor exposes you to the risk of having to intervene again a few weeks later on another sensor. Simultaneous replacement of the entire set guarantees homogeneous sensitivity across all detection thresholds and avoids false levels caused by reactivity differences between a new sensor and aging sensors.\u003c\/p\u003e\n\n\u003cp\u003eThis is particularly important for NIVA 5 and CRBTRN boxes, where the 5 sensors define distinct thresholds (start of filling, end of filling, low water safety, start of overflow, stop of overflow). Inconsistency between sensors can cause unpredictable behavior of the regulator, with untimely filling cycles or forced operation.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation in the Surge Tank or Skimmer\u003c\/h2\u003e\n\n\u003cp\u003eFor infinity pools (NIVA 5, CRBTRN), the 5 sensors are placed in the surge tank at different heights corresponding to the detection thresholds programmed in the box. CCEI recommends installing them in a channel or PVC pipe to keep them separated, prevent entanglement, and ensure reliable detection. The sensor triggering forced operation (S1) must be below the overflow of the tank.\u003c\/p\u003e\n\n\u003cp\u003eFor skimmer pools (NIVA 3), the 3 necessary sensors are attached inside the skimmer on a mounting rail, at the height corresponding to the desired water level. The provided wiring connects the sensors to the control box installed in the technical room. If the distance exceeds the cable length, it is possible to extend it with a waterproof junction box, without exceeding 50 meters between the box and the junction box.\u003c\/p\u003e\n\n\u003ch2\u003ePack of 5 or Individual Sensor?\u003c\/h2\u003e\n\n\u003cp\u003ePool Planet also offers the CCEI stainless steel level sensor individually with 6 m of cabling, for occasional replacement of a single faulty sensor. The pack of 5, however, is the recommended choice when your installation is more than 5 years old or if you experience recurrent malfunctions on the regulator, as it ensures a complete overhaul of the detection system in a single shipment.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139503157585,"sku":"SF140016X5","price":99.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4893-12499-0-pack-de-5-sondes-de-niveau-inox-pour-niva-3-5-lineo-5s-crbtrn-crnse__04386__50583.1741076859.1280.1280.jpg?v=1760739372"},{"product_id":"flotteur-pour-coffret-rns-1","title":"Float for RNS-1 cabinet","description":"\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003eCCEI RNS-1 Level Controller Replacement Float\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eFloat for RNS-1 automatic level control box\u003c\/span\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139618173265,"sku":"SF140008","price":85.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/4967-12128-0-flotteur-pour-coffret-rns1__34787__21980.1741076979.1280.1280.png?v=1760740497"},{"product_id":"regulateur-de-niveau-pour-piscine-niva-3-ccei","title":"Pool level controller - NIVA 3 - CCEI","description":"\u003ch2 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3 - The pool level regulator with Skimmer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eEnsure a constant water level in your pool with the \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3 pool level regulator\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e from CCEI. This innovative unit automatically fills skimmer-equipped pools, ensuring optimal water balance. Designed for autonomous operation, it continuously monitors the water level and initiates refilling when it drops below the set threshold.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThanks to its probe detection system, the \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e protects your pool equipment by preventing the pump from running dry. Its quick and easy installation makes it an essential accessory for efficient and worry-free water level management in your pool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-pm-slice=\"1 3 []\"\u003e\u003cspan\u003e\u003cstrong\u003eWhy choose the NIVA 3 pool level regulator?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePrecise automatic filling\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: filling activates when the water level is too low.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePump protection\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: automatic shutdown in case of low water to prevent damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFilling safety\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: limits water intake to a maximum duration of 3 hours to prevent overconsumption.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEasy and intuitive installation\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: pre-equipped unit for quick commissioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDurability and reliability\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: designed to withstand outdoor conditions (IP-55).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3 Operation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3 pool level regulator\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e operates using a system of three submerged probes that continuously analyze the water level. When the level drops below the minimum threshold, a 24V solenoid valve automatically activates to fill the pool until the desired height is reached.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eIntuitive control interface\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe unit features a control panel with indicator lights that provide a quick overview of the system status. The front switch provides simple manual control, allowing the device to be activated or deactivated as needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 style=\"padding-left: 80px;\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/interface-niva3-ccei.png\" alt=\"\" width=\"452\" height=\"172\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eAdditional protection for your pool\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe equipment also includes a mesh filter to prevent clogging of the solenoid valve and ensure optimal operation. With an operating pressure between 1 and 10 bar, the \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e adapts to all pool configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-pm-slice=\"1 3 []\"\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3 Technical Specifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePower supply type\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: 220V \/ 50 Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eControl voltage\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: 24V AC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWaterproof rating\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: IP-55\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: 220 x 200 x 150 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProbe length\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: 10 m\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSolenoid valve\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: 24V 1\" (IP65)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIntegrated mesh filter\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOperating pressure\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e: 1 to 10 bar\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003e\u003cstrong\u003eFAQ - Frequently Asked Questions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e1. How to install the NIVA 3 pool level regulator?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 3\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e is simply installed in your technical room. You just need to connect it to the electrical supply and the filling solenoid valve. The probes are placed in the skimmer to continuously monitor the water level.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"padding-left: 40px;\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/installation-sondes-niva3.png\" alt=\"\" width=\"317\" height=\"158\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e2. What is the lifespan of the NIVA 3 probes?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe probes are designed for a long lifespan. Regular maintenance (cleaning of deposits) ensures their proper functioning for several years.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e3. Is the NIVA 3 compatible with all pools?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eYes, this level regulator is compatible with all skimmer pools and can be installed on new or existing pools.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e4. Can the NIVA 3 be used for an overflow pool?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eNo, this model is designed for skimmer pools. For an overflow pool, it is recommended to use a \u003ca href=\"https:\/\/www.poolplanet.com\/products\/regulateur-de-niveau-pour-piscine-a-debordement-niva-5-ccei\"\u003eNIVA 5\u003c\/a\u003e which is adapted for this type of installation. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e5. What to do in case of filling system failure?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eIn case of a problem, first check the power supply and the condition of the probes. Ensure that the solenoid valve is properly connected and that the mesh filter is not obstructed.\u003c\/span\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139646058833,"sku":"PF10L009","price":349.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5016-13094-1-niva-face-CCEI__67472__36636.1741077057.1280.1280.jpg?v=1760741259"},{"product_id":"regulateur-de-niveau-pour-piscine-a-debordement-lineo-5s-ccei","title":"Level regulator for infinity pool - LINEO 5S - CCEI","description":"\u003ch2\u003e\u003cstrong\u003eFor managing all infinity pools\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Lineo 5S level regulator is suitable for different types of infinity pools: from mirror pools (with water drainage on each side) to those with an underground surge tank.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cstrong\u003e5 level sensors for optimal management\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe Lineo 5S regulator continuously maintains the pool's water level. Thanks to its 5 conductivity sensors, the Lineo 5S detects fluctuations in the pool's water level and adapts to events. Specifically designed for infinity pools, with a surge tank. This regulation device, managed by a microcontroller, maintains a constant water level. The LINEO system automatically manages the pool's filling and the forced start-up of the filtration pump based on the detected level. In addition, it detects the phenomenon causing an overflow and acts optimally to control it. The LINEO can also control a drain solenoid valve.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe LINEO is designed to detect 4 different levels in the surge tank: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1. Low water level\u003c\/p\u003e\n\u003cp\u003e2. Start filling level\u003c\/p\u003e\n\u003cp\u003e3. End filling level\u003c\/p\u003e\n\u003cp\u003e4. Overflow level \u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cstrong\u003eNumerous features of the CCEI Lineo 5S\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eIn the event of the water level being too high or too low, the Lineo 5S pool level regulator can automatically fill the pool or drain it more quickly. It also protects the filtration pump from a lack of water in the pool and can drain the pool using a solenoid valve.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139646157137,"sku":"PF10L022","price":525.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5017-12225-0-regulateur-de-niveau-piscine-debordement-lineo5s-ccei__85132__84869.1741077057.1280.1280.png?v=1760741270"},{"product_id":"regulateur-de-niveau-pour-piscine-a-debordement-niva-5-ccei","title":"Level regulator for infinity pools - NIVA 5 - CCEI","description":"\u003ch2\u003eFor water level management of all infinity pools\u003c\/h2\u003e\n\u003cp\u003eSpecially designed for infinity pools, this control device maintains a constant water level in the buffer tank. The NIVA system automatically manages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePool filling and pump lockout when the level is too low\u003c\/li\u003e\n\u003cli\u003eForced start of the filtration pump if the level is high.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e5 level probes for optimal water level management\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNiva 5\u003c\/strong\u003e level regulator continuously maintains the pool's water level. Thanks to its 5 probes, the \u003cstrong\u003eNiva 5\u003c\/strong\u003e detects water level fluctuations in the pool and adapts to events. If the water level is too high or too low, the \u003cstrong\u003eNiva 5\u003c\/strong\u003e pool level regulator can automatically fill the pool or drain it more quickly. It also protects the filtration pump from a lack of water in the pool and can drain the pool via a solenoid valve.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eLack of water \/ Filling\u003c\/h2\u003e\n\u003cp\u003eAs soon as the buffer tank level drops below the \"filling start\" level (only the reference probe in the water), the filling solenoid valve is activated and the buffer tank fills until the \"filling end\" level (3 probes in the water) is reached again. The system prevents the pump from operating during this time and will only allow it to operate again when the level rises above probe S3.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eThe \"Overflow\" function\u003c\/h2\u003e\n\u003cp\u003eOverflow is detected when the water level is above probe S1. The filtration pump is then forced on until the level drops below probe S2.\u003c\/p\u003e\n\u003cp style=\"padding-left: 80px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/fonction-trop-plein-niva5.png\" alt=\"\" width=\"545\" height=\"302\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow NIVA 5 works\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNIVA 5 pool level regulator\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e works thanks to a system of 5 submerged probes that constantly analyze the water level. When the level drops below the minimum threshold, a 24V solenoid valve automatically activates to fill the pool until the desired height is reached.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eAn intuitive control interface\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe control box has a control panel with indicator lights allowing you to see the system's status at a glance. The switch on the front provides simple manual control, allowing the device to be activated or deactivated as needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"padding-left: 80px;\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/interface-niva5-ccei.png\" alt=\"\" width=\"504\" height=\"192\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139646910801,"sku":"PF10L008","price":410.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5018-13097-0-niva-trois-quarts-CCEI__42340__74902.1741077060.1280.1280.jpg?v=1760741295"},{"product_id":"regulateur-de-niveau-pour-piscine-avec-skimmer-rns-1-ccei","title":"Pool level regulator with skimmer - RNS-1 - CCEI","description":"\u003ch2\u003eCCEI RNS-1 Automatic Level Regulator for Skimmer Pools: Smart Filling with Float\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCCEI RNS-1 level regulator unit\u003c\/strong\u003e is a standalone electronic system that automatically maintains the optimal water level in skimmer pools. It consists of a \u003cstrong\u003e230V IP55 control unit\u003c\/strong\u003e (220 × 200 × 150 mm), a \u003cstrong\u003eMPF-2 mini-float\u003c\/strong\u003e with 10 meters of cable that is fixed in the skimmer, a \u003cstrong\u003e24V solenoid valve\u003c\/strong\u003e controlled by the unit, and a protective \u003cstrong\u003estrainer filter\u003c\/strong\u003e (maximum pressure 4 bars) to be installed on the water inlet. The principle is simple: when the water level in the skimmer drops and the float descends, the unit automatically opens the filling solenoid valve. As soon as the level rises and the float rises with it, the unit closes the solenoid valve. The system incorporates a \u003cstrong\u003e10-second anti-ripple delay\u003c\/strong\u003e, a \u003cstrong\u003elow water safety feature\u003c\/strong\u003e that blocks the filtration pump if the level remains too low, and a \u003cstrong\u003eleak protection\u003c\/strong\u003e that cuts off filling after 3 continuous hours.\u003c\/p\u003e\n\u003cp\u003eThis regulator is specifically designed for \u003cstrong\u003eskimmer pools\u003c\/strong\u003e (as opposed to overflow pools, which require the RNS-2 model with a level probe). It is also suitable for pools equipped with an \u003cstrong\u003eautomatic cover\u003c\/strong\u003e, where the water level must remain stable for the slatted cover to function correctly.\u003c\/p\u003e\n\u003ch2\u003eWhy install an automatic level regulator in a skimmer pool?\u003c\/h2\u003e\n\u003cp\u003eThe water level in a pool is never truly stable. \u003cstrong\u003eEvaporation\u003c\/strong\u003e causes the level to drop several centimeters per week in summer—up to 1 cm per day during hot weather or sustained wind. \u003cstrong\u003eSplashing\u003c\/strong\u003e and \u003cstrong\u003ebathers leaving the pool\u003c\/strong\u003e also remove water from the basin (approximately 50 to 100 liters per bather per day in a family pool). \u003cstrong\u003eBackwashing\u003c\/strong\u003e (back-flushing the filter) consumes 200 to 500 liters of water with each operation. Conversely, \u003cstrong\u003erain\u003c\/strong\u003e raises the level, sometimes by several centimeters during violent thunderstorms.\u003c\/p\u003e\n\u003cp\u003eA water level that is too low causes the \u003cstrong\u003eskimmer to draw air\u003c\/strong\u003e: water no longer enters the skimmer correctly, and the filtration pump draws in air instead. This causes the pump to cavitate (a characteristic banging noise), reduces its filtration flow rate, and can damage mechanical seals and the impeller in the medium term. In the long term, a pump that cavitates regularly will see its lifespan reduced by half.\u003c\/p\u003e\n\u003cp\u003eA water level that is too high reduces \u003cstrong\u003eskimming efficiency\u003c\/strong\u003e: surface water, which concentrates the majority of dirt (leaves, insects, sunscreens, pollen), is no longer effectively drawn into the skimmer. The basin remains cloudy and dirty despite hours of filtration. With an automatic submerged slatted cover, a level that is too high or too low prevents the winding mechanism from functioning properly.\u003c\/p\u003e\n\u003cp\u003eThe RNS-1 regulator solves all these problems by \u003cstrong\u003emaintaining a constant water level\u003c\/strong\u003e, at the optimal height you define by positioning the float in the skimmer. You no longer have to monitor the water level or manually open the filling tap: the system manages everything automatically, 24 hours a day, summer and winter.\u003c\/p\u003e\n\u003ch2\u003eSystem operation: MPF-2 float + controlled solenoid valve\u003c\/h2\u003e\n\u003cp\u003eThe heart of the RNS-1 system is the \u003cstrong\u003eMPF-2 mini-float\u003c\/strong\u003e, a small floating box equipped with a waterproof magnetic switch that is fixed in the skimmer at the desired water level. The float is connected to the RNS-1 unit by a \u003cstrong\u003e10-meter cable\u003c\/strong\u003e, allowing the unit to be installed in the plant room even if it is far from the skimmer.\u003c\/p\u003e\n\u003cp\u003eThe operation is as follows: when the water level is correct, the float floats on the surface and its magnetic switch is in the \"closed\" position. The RNS-1 unit detects this signal and keeps the filling solenoid valve closed. When the water level drops (evaporation, splashing, backwashing), the float descends with the level. As soon as it reaches the lower position defined by its mounting bracket, its magnetic switch switches to the \"open\" position, which sends a signal to the RNS-1 unit.\u003c\/p\u003e\n\u003cp\u003eThe unit then waits \u003cstrong\u003e10 seconds\u003c\/strong\u003e (anti-ripple delay) to check that the level is stable in the low position, and not that the float has simply been shaken by a wave or a bather. If after 10 seconds the float is still in the low position, the unit opens the \u003cstrong\u003e24V filling solenoid valve\u003c\/strong\u003e, which allows water from the mains to flow into the pool. Water usually flows through a dedicated inlet in the skimmer or directly into the basin via a return jet.\u003c\/p\u003e\n\u003cp\u003eThe water gradually fills the pool, the level rises, and the float rises with it. As soon as the float reaches its high position, its magnetic switch returns to the \"closed\" position. The RNS-1 unit again waits 10 seconds to confirm that the level is stable, then closes the solenoid valve. Filling stops. This cycle repeats automatically each time the level drops below the defined threshold.\u003c\/p\u003e\n\u003ch2\u003e10-second anti-ripple delay: insensitive to waves and turbulence\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e10-second delay\u003c\/strong\u003e is an essential function of the RNS-1, which prevents untimely opening\/closing of the solenoid valve. Without this delay, every wave, every passage of a bather, every ripple caused by the wind would trigger the float and open the solenoid valve for a few seconds, then close it, then reopen it, and so on. This rapid cycle would prematurely wear out the solenoid valve and waste water.\u003c\/p\u003e\n\u003cp\u003eWith the 10-second delay, the RNS-1 unit only opens the solenoid valve if the float remains in the low position for at least 10 consecutive seconds, which proves that the water level has actually dropped and that it is not just a simple ripple. Similarly, the solenoid valve only closes if the float remains in the high position for 10 seconds, confirming that the level has risen and stabilized.\u003c\/p\u003e\n\u003cp\u003eThis delay makes the system \u003cstrong\u003etotally insensitive to surface disturbances\u003c\/strong\u003e, even in a busy pool or one exposed to wind. The float can be shaken by waves without triggering unwanted filling.\u003c\/p\u003e\n\u003ch2\u003eAnti-leak safety: automatic cut-off after 3 hours of continuous filling\u003c\/h2\u003e\n\u003cp\u003eThe RNS-1 unit incorporates a very important \u003cstrong\u003eoverflow and leak prevention safety feature\u003c\/strong\u003e. If filling continues for more than 3 hours without the float rising to the high position, the unit assumes there is a problem (leak in the pool, solenoid valve stuck open, float stuck in the low position, blocked water inlet pipe) and automatically switches to \u003cstrong\u003efault mode\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIn fault mode, the red \"Fault\" LED on the unit lights up, the solenoid valve closes immediately to stop filling, and the \"pump inhibit\" output also closes to prevent the filtration pump from operating (protection against lack of water if the pool has emptied). The system remains blocked in this state until you press the \"system stop\" button to reset the fault.\u003c\/p\u003e\n\u003cp\u003eThis safety feature prevents two catastrophic scenarios: (1) continuous overflow of the pool for hours or days if you are away (wasting thousands of liters of water and risking flooding the plant room or garden), and (2) destruction of the filtration pump if the pool empties completely due to a leak and the pump continues to run dry.\u003c\/p\u003e\n\u003cp\u003eA 3-hour filling represents a considerable volume of water: at a typical flow rate of 300 to 500 liters\/hour (flow rate of a 3\/4\" or 1\" solenoid valve), this represents 900 to 1,500 liters. If your pool has not returned to the correct level after receiving 1,000 liters of water, there must be a major problem (liner leak, open valve, punctured pipe, etc.) that requires your intervention.\u003c\/p\u003e\n\u003ch2\u003e\"Pump inhibit\" output: protecting the filtration pump from lack of water\u003c\/h2\u003e\n\u003cp\u003eThe RNS-1 unit has a relay output called \u003cstrong\u003e\"pump inhibit\"\u003c\/strong\u003e, which can be connected to the filtration pump control (via a contactor or filtration unit). When the water level is correct, this output is closed (relay activated), which authorizes pump operation. When the water level drops too low and filling fails to restore it, or when the system enters fault mode, the \"pump inhibit\" output opens (relay deactivated), which cuts off power to the filtration pump.\u003c\/p\u003e\n\u003cp\u003eThis function protects the pump against dry running (severe cavitation) which would quickly destroy the mechanical seals and the impeller. It is particularly useful if you are away for several days and a significant leak occurs: the RNS-1 regulator will try to compensate for the leak for 3 hours, then will go into fault and cut off the pump, thus preventing the pump from running dry for days and being completely destroyed.\u003c\/p\u003e\n\u003cp\u003eConnecting the \"pump inhibit\" output is optional but highly recommended for unsupervised pools (secondary residences, prolonged absences).\u003c\/p\u003e\n\u003ch2\u003eRNS-1 kit contents: complete system ready for installation\u003c\/h2\u003e\n\u003cp\u003eThe RNS-1 regulator is supplied as a \u003cstrong\u003ecomplete kit\u003c\/strong\u003e with all the necessary elements for installation:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 RNS-1 unit\u003c\/strong\u003e: 230V AC electronic box, dimensions 220 × 200 × 150 mm, IP55 waterproof rating (protected against water jets from all directions), equipped with status LEDs (filling, fault), system stop button, and connection terminals for the float, solenoid valve, and \"pump inhibit\" output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 MPF-2 mini-float with 10 meters of cable\u003c\/strong\u003e: Compact float with waterproof magnetic switch, pre-installed 10-meter cable, supplied with its adjustable mounting bracket for installation in the skimmer. The bracket screws or glues to the inner wall of the skimmer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 24V solenoid valve\u003c\/strong\u003e: Normally closed solenoid valve, 3\/4\" (20\/27) or 1\" thread depending on version, controlled by low voltage 24V by the RNS-1 unit. The low voltage 24V is safer than 230V solenoid valves in case of accidental contact with water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 strainer filter\u003c\/strong\u003e: Removable cartridge filter to be installed on the water inlet before the solenoid valve, to retain impurities from the mains (sand, limescale, rust) that could block the solenoid valve. Maximum supported pressure: 4 bars. Cleaning recommended every 6 to 12 months.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 installation and user manual\u003c\/strong\u003e: Complete guide with wiring diagrams, float assembly instructions, and troubleshooting procedures in case of malfunction.\u003c\/p\u003e\n\u003cp\u003eAll equipment is CCEI brand, ensuring perfect compatibility and maximum durability. You will also need: fixing clamps for the solenoid valve and the strainer filter, Teflon tape or thread seal for threaded connections, and possibly a PVC or polyethylene water inlet pipe to connect the solenoid valve to the water supply and the pool filling point.\u003c\/p\u003e\n\u003ch2\u003eInstallation of the solenoid valve and strainer filter: where and how?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003esolenoid valve\u003c\/strong\u003e and \u003cstrong\u003estrainer filter\u003c\/strong\u003e are connected to the pool's filling water inlet. Two configurations are possible depending on your installation:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration 1 — Dedicated water inlet for filling\u003c\/strong\u003e: If your pool has a dedicated water inlet for filling (a pipe waiting in the plant room or at the edge of the pool), install the strainer filter then the solenoid valve in series on this inlet. The filter is placed upstream (mains side), the solenoid valve downstream (pool side). The outlet pipe of the solenoid valve connects to the filling inlet which generally opens into the skimmer or directly into the basin via a wall jet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration 2 — Tapping into an outdoor tap or general network\u003c\/strong\u003e: If your pool does not have a dedicated inlet, you must create a tap on the outdoor water network (garden tap, main manifold in the plant room). Install a T-fitting, then the strainer filter, then the solenoid valve, then a pipe that brings the water to the skimmer or the basin. Caution: check that the network pressure does not exceed 4 bars (strainer filter limit). If your network exceeds 4 bars, install a pressure reducer upstream of the filter.\u003c\/p\u003e\n\u003cp\u003eThe solenoid valve must be installed in a \u003cstrong\u003ehorizontal position\u003c\/strong\u003e (valve body horizontal, coil upwards) for optimal operation. It must be protected from frost in winter: if your plant room is not frost-free, plan for drainage or disassembly of the solenoid valve before winter to prevent it from freezing and cracking. Wiring between the solenoid valve and the RNS-1 unit is done with low voltage 24V, using standard 2 × 0.75 mm² or 2 × 1 mm² electrical cable.\u003c\/p\u003e\n\u003ch2\u003eInstallation of the MPF-2 float in the skimmer: height adjustment\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eMPF-2 mini-float\u003c\/strong\u003e is fixed inside the skimmer, usually on the wall opposite the suction opening (to avoid being sucked in by the water flow). The supplied mounting bracket screws or glues (epoxy resin adhesive, Sikaflex) onto the skimmer wall, at the desired height for the optimal water level.\u003c\/p\u003e\n\u003cp\u003eThe ideal mounting height is generally \u003cstrong\u003emidway up the rectangular skimmer opening\u003c\/strong\u003e, approximately 10 to 15 cm below the top edge of the basin. At this height, the skimmer effectively draws in surface impurities without taking in air. You can adjust this height according to your preferences: higher if you want a maximum water level, lower if you fear overflows during rain.\u003c\/p\u003e\n\u003cp\u003eOnce the bracket is fixed, clip or screw the MPF-2 float onto its bracket. The float must be able to move up and down freely for a few centimeters (float travel), without rubbing against the skimmer walls. Pass the 10-meter cable from the float through the skimmer's technical conduit or through a dedicated cable gland, to the plant room where the RNS-1 unit is located. Connect the cable to the unit's terminal block, observing the polarity indicated in the manual.\u003c\/p\u003e\n\u003ch2\u003eIP55 enclosure 220 × 200 × 150 mm: wall mounting in the plant room\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRNS-1 unit\u003c\/strong\u003e is fixed to the wall of the plant room, at a convenient height for easy access to the buttons and status LEDs. Its \u003cstrong\u003eIP55\u003c\/strong\u003e protection rating means it is protected against dust and against water jets from all directions (pressure washing, condensation, splashes), which makes it suitable for the humid environment of a pool plant room.\u003c\/p\u003e\n\u003cp\u003eThe unit has \u003cstrong\u003estatus LEDs\u003c\/strong\u003e visible through the cover: green \"power\" LED, orange \"filling in progress\" LED, red \"fault\" LED. These LEDs allow you to monitor the system's operation at a glance. A \u003cstrong\u003e\"system stop\" button\u003c\/strong\u003e on the front allows you to reset a fault after intervention (repairing a leak, unblocking the float, replacing the solenoid valve, etc.).\u003c\/p\u003e\n\u003cp\u003eElectrical connections are made via screw terminals inside the unit: 230V AC terminal block for mains power, low voltage terminal block for the float cable, 24V terminal block for the solenoid valve, and \"pump inhibit\" relay output for optional connection to the filtration pump control. All connections are clearly identified and described in the supplied manual.\u003c\/p\u003e\n\u003ch2\u003eUse cases where the RNS-1 is particularly recommended\u003c\/h2\u003e\n\u003cp\u003eWhile any pool owner can benefit from an automatic level regulator, the RNS-1 is \u003cstrong\u003eparticularly recommended\u003c\/strong\u003e in the following situations:\u003c\/p\u003e\n\u003cp\u003e(\u003cstrong\u003eSecondary residences or prolonged absences\u003c\/strong\u003e: If you are not present to monitor the water level weekly, the RNS-1 ensures that the level remains optimal in your absence. This prevents the pump from cavitating and being damaged, and ensures efficient filtration even when no one is there to open the filling tap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePools with high evaporation\u003c\/strong\u003e: In very sunny, windy regions, or with a large basin surface, evaporation can reach 5 to 10 mm per day in summer, or 50 to 100 liters per day for a 10 × 5 meter pool. Without a regulator, the pool would have to be filled manually every 2 or 3 days, which quickly becomes cumbersome.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePools with automatic submerged slatted covers\u003c\/strong\u003e: Automatic covers require a stable water level to function correctly. If the level drops, the cover rail is out of the water and the mechanism jams. The RNS-1 maintains a constant level, ensuring the proper functioning of the cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePools equipped with level-sensitive treatment systems\u003c\/strong\u003e: Salt chlorinators and pH regulators work best when the filtration flow rate is stable. A water level that is too low reduces the flow rate (pump cavitation), which disrupts the operation of these devices and degrades water quality. The RNS-1 ensures a constant flow rate and therefore optimal treatment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePools with variable speed filtration pumps\u003c\/strong\u003e: These pumps change their rotation speed (and therefore their flow rate) according to needs. At low speed (energy-saving mode), they are more sensitive to air intake and lack of water. A stable level guaranteed by the RNS-1 allows you to fully enjoy the energy savings of variable speed pumps without risking cavitation.\u003c\/p\u003e\n\u003ch2\u003eCCEI level regulator range: RNS-1, RNS-2, NIVA 3 and NIVA 5\u003c\/h2\u003e\n\u003cp\u003eCCEI offers four models of level regulators to suit all types of pools and budgets: the \u003cstrong\u003eRNS-1 with float\u003c\/strong\u003e (this product), the \u003cstrong\u003eRNS-2 with electronic probe\u003c\/strong\u003e, the \u003cstrong\u003eNIVA 3\u003c\/strong\u003e and the \u003cstrong\u003eNIVA 5\u003c\/strong\u003e. All four perform the same function (automatic water level maintenance), but differ in their detection technology, functionalities and level of sophistication:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRNS-1 (MPF-2 float)\u003c\/strong\u003e: High-end electronic system with separate control box and mechanical detection via magnetic switch float. Advantages: simple installation in the skimmer, 10-second anti-splash delay, 3-hour anti-leak safety with automatic cut-off, \"pump off\" output to protect the filtration pump from dry running, complete kit with 24V low-voltage solenoid valve and strainer filter included, diagnostic LED. Disadvantage: the float can be obstructed by leaves or debris accumulated in the skimmer and requires occasional cleaning.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.poolplanet.com\/collections\/coffrets-de-regulation-de-niveau\/products\/regulateur-de-niveau-pour-piscine-avec-skimmer-rns-2-ccei\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eRNS-2 (stainless steel probe)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e: High-end electronic system with separate control box and detection via an immersed capacitive or resistive stainless steel probe. Advantages: no moving mechanical parts, impervious to debris, ideal for overflow pool buffer tanks, chlorine\/bromine\/salt resistant stainless steel probe, features identical to RNS-1 (delay, 3-hour safety, pump off output). Disadvantage: more expensive than RNS-1, requires an appropriate mounting location for the probe (usually buffer tank or quiet skimmer area).\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003ca href=\"https:\/\/www.poolplanet.com\/collections\/coffrets-de-regulation-de-niveau\/products\/regulateur-de-niveau-pour-piscine-niva-3-ccei\" style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eNIVA 3\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e: Economical all-in-one solution with integrated solenoid valve directly in the casing and a float. Identical principle to RNS-1 (float detection) but in an ultra-compact and simplified format. Ideal for small pools and basic installations where the filling point is close to the skimmer. Differs from RNS-1 by the absence of a separate electronic box, advanced functions (no \"pump off\" output, no diagnostic LED), and reduced delay. Economical but less secure.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.poolplanet.com\/collections\/coffrets-de-regulation-de-niveau\/products\/regulateur-de-niveau-pour-piscine-a-debordement-niva-5-ccei\"\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cstrong\u003eNIVA 5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e: An intermediate solution between NIVA 3 and RNS-1, combining a compact format with additional features compared to NIVA 3. Offers a better level of protection and control than NIVA 3 while remaining more affordable than RNS-1. Suitable for medium-sized pools looking for a good compromise between price and features.\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003epools with classic skimmers\u003c\/strong\u003e: the RNS-1 with float is the standard high-end choice offering the best balance between reliability, safety, and advanced features. The NIVA 5 is a good price\/feature compromise for standard installations. The NIVA 3 will suit small pools or very tight budgets that accept fewer safety features. For \u003cstrong\u003eoverflow pools\u003c\/strong\u003e with a buffer tank: the RNS-2 with probe is generally preferred because it attaches easily to the buffer tank wall and is not affected by overflow waves.\u003c\/p\u003e\n\u003ch2\u003eMaintenance of the RNS-1 system: cleaning the float and checking the solenoid valve\u003c\/h2\u003e\n\u003cp\u003eThe RNS-1 regulator requires \u003cstrong\u003eminimal maintenance\u003c\/strong\u003e, mainly focused on the float and the strainer filter:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning the MPF-2 float\u003c\/strong\u003e: Once or twice a season (or more if your skimmer accumulates a lot of debris), remove the float from its support and clean it with clear water to remove leaves, algae, limescale, or biofilm that could impede its free movement. Check that the float moves up and down freely on its support without rubbing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning the strainer filter\u003c\/strong\u003e: Every 6 to 12 months, unscrew the transparent bowl of the strainer filter, remove the filter cartridge, clean it with clear water, or replace it if it is very dirty. A clogged filter reduces the filling flow and can prevent the level from rising correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolenoid valve check\u003c\/strong\u003e: The 24V solenoid valve does not require any particular maintenance, but it is prudent to check once a year that it opens and closes correctly. To do this, force a fill by manually lowering the float in the skimmer: you should hear the solenoid valve open (a slight \"click\") and water should start flowing into the pool. Raise the float: the solenoid valve should close after 10 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWinterization\u003c\/strong\u003e: If your technical room is not frost-free, purge the solenoid valve and the strainer filter before winter to prevent them from freezing and cracking. Cut off the power supply to the RNS-1 box during passive winterization (pool not in use and not filtered).\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"511\" width=\"882\" alt=\"rns1 regulateur nvieau pour piscine\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/capture-d-e-cran-2025-01-29-a-17_37_51.png\"\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139648188753,"sku":"PF10L006","price":380.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5019-12228-0-regulateur-de-niveau-piscine-skimmer-rns1-ccei__42136__94885.1741077061.1280.1280.png?v=1760741320"},{"product_id":"regulateur-de-niveau-pour-piscine-avec-skimmer-rns-2-ccei","title":"Pool Water Level Controller with Skimmer - RNS-2 - CCEI","description":"\u003cdiv class=\"column\"\u003e\n\u003ch2\u003e\u003cstrong\u003eLevel regulation for many pools\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRNS-2\u003c\/strong\u003e manufactured by CCEI automatically maintains the water level in skimmer pools or those equipped with an automatic cover. It features a detection probe to adapt its operation according to the pool's water level.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAutomatic pool filling\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis pool level regulator includes two programs that detect whether the pool water level is too low or too high. In the first case, the \u003cstrong\u003eRNS-2\u003c\/strong\u003e opens the solenoid valve to raise the pool water level. In the second, the level regulation device stops filling and starts pumping out the pool water.\u003c\/p\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eEasy installation and broad compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eRNS-2 level regulator\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e is designed for easy integration into your existing setup. It is compatible with various types of pools and can be installed in just a few steps. Its filling probe ensures a precise and immediate reaction to water level fluctuations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/img-4292-1.png\" alt=\"RNS 2 level probe\" width=\"870\" height=\"237\"\u003e\u003c\/p\u003e\n\u003cp\u003eProbe dimensions: 2.9x1x4 cm\u003c\/p\u003e\n\u003cp\u003eRail dimensions: 3.5x1.4x5 cm\u003c\/p\u003e\n\u003cp\u003eMeasurement between high and low level of 1.5 cm\u003c\/p\u003e\n\u003ch2 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eFAQ: Everything you need to know about the CCEI RNS-2\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e1. Why use a pool level regulator like the RNS-2?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eRNS-2\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e ensures a constant water level, thus preventing inconveniences such as filtration malfunction or excess water that could damage your technical room.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e2. Is it compatible with all pools?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis model is suitable for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eskimmer pools\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and pools \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ewith automatic covers\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, ensuring broad compatibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e3. How does the RNS-2's detection probe work?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe probe continuously analyzes the water level. If it drops below a critical threshold, the solenoid valve activates to fill the pool. If the level is too high, the device stops filling and activates pumping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e4. Is the RNS-2 complicated to install?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eNo, installation is simple and quick. Simply connect the probe and the solenoid valve to the control box, then plug the entire unit into an electrical outlet.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e5. Does the RNS-2 consume a lot of energy?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eNo, it only operates when action is needed, making it very energy efficient.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139649433937,"sku":"PF10L002","price":380.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5020-12232-0-regulateur-de-niveau-piscine-skimmer-rns2-ccei__37957__37191.1741077063.1280.1280.png?v=1760741347"},{"product_id":"relais-controleur-de-niveau-ebr-1-3-sondes","title":"Level controller relay EBR-1 - 3 probes","description":"\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eEBR-1 Electronic Level Control Relay\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe EBR-1 level controller relay\u003c\/strong\u003e automatically monitors water levels. The set includes an electronic relay that clips onto a DIN rail, but \u003cstrong\u003e\u003cspan\u003edoes not include the probes.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCurrent interruption: 6A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFrequency: 50 \/ 60 Hz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions (LxWxH): 100 x 92 x 67 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVoltage: 250 V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2-year warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139658215761,"sku":"MPCP0400","price":71.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/5025-12250-0-relais-controleur-de-niveau-ebr1-3-sondes-ccei__55578__40952.1741077078.1280.1280.png?v=1760741444"},{"product_id":"relais-controleur-de-niveau-ebr-2-5-sondes","title":"EBR-2 Level Controller Relay - 5 Probes","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003eEBR-2 Electronic Level Control Relay\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe EBR-2 level control relay\u003c\/strong\u003e automatically monitors water levels. The set includes an electronic relay that clips onto a DIN rail but \u003cstrong\u003e\u003cspan\u003edoes not include the probes.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139659264337,"sku":"MPCP0401","price":150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/relais-controleur-de-niveau-ebr_25C3_25A9-5sondes-ccei__40574.1654685910.1280.1280.png?v=1760741455"},{"product_id":"sonde-de-niveau-inox-pour-rns-2","title":"CCEI Stainless Steel Water Level Sensor for RNS-2 Pool Controller – 10 m Cable","description":"\u003ch2\u003eStainless steel level sensor for CCEI RNS-2 control box: precise water level detection\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003estainless steel level sensor for RNS-2\u003c\/strong\u003e is an electronic sensor that detects the presence or absence of water at a specific point in the pool skimmer or balance tank. It connects to the \u003cstrong\u003eCCEI RNS-2 level control box\u003c\/strong\u003e, which automatically controls a filling solenoid valve to maintain a constant water level in the pool. The sensor comes with a \u003cstrong\u003e10-meter cable\u003c\/strong\u003e, allowing it to be installed in the skimmer or balance tank while connecting the RNS-2 box in the technical room. It is made of \u003cstrong\u003estainless steel\u003c\/strong\u003e, resistant to corrosion, chlorine, bromine, and salt, for maximum lifespan in a pool environment.\u003c\/p\u003e\n\n\u003cp\u003eThe sensor body measures \u003cstrong\u003e2.9 × 1 × 4 cm\u003c\/strong\u003e, and it attaches to a \u003cstrong\u003emounting rail\u003c\/strong\u003e with dimensions 3.5 × 1.4 × 5 cm, which can be screwed or glued into the skimmer. This rail mounting allows for \u003cstrong\u003eprecise adjustment of the detection height\u003c\/strong\u003e: you position the sensor at the desired water level, and the RNS-2 regulator automatically maintains this level by opening the solenoid valve as soon as the water drops below the sensor.\u003c\/p\u003e\n\n\u003ch2\u003eLevel sensor operation: capacitive detection or contact with water\u003c\/h2\u003e\n\n\u003cp\u003eThe CCEI level sensor operates on a principle of \u003cstrong\u003econtact detection with water\u003c\/strong\u003e or \u003cstrong\u003evariation in electrical capacitance\u003c\/strong\u003e. When the sensor is immersed in water, it closes an electrical circuit or changes its capacitance, which sends a signal to the RNS-2 box to indicate that the level is correct. When the water level drops and the sensor is exposed to air, the circuit opens or the capacitance changes, and the RNS-2 regulator commands the opening of the filling solenoid valve to restore the level.\u003c\/p\u003e\n\n\u003cp\u003eThis system is extremely reliable because it contains \u003cstrong\u003eno moving mechanical parts\u003c\/strong\u003e (no float, no spring, no diaphragm). Detection is purely electronic, which eliminates the risk of blockages by limescale, leaves, or debris. The sensor can remain permanently immersed without wear, and its stainless steel casing guarantees total resistance to corrosion, even in highly chlorinated or saltwater.\u003c\/p\u003e\n\n\u003ch2\u003eWhy use an RNS-2 automatic level regulator with a sensor?\u003c\/h2\u003e\n\n\u003cp\u003eThe water level of a pool naturally fluctuates throughout the season. \u003cstrong\u003eEvaporation\u003c\/strong\u003e causes the water level to drop several centimeters per week in summer (up to 1 cm per day during hot weather). \u003cstrong\u003eSplashes\u003c\/strong\u003e and \u003cstrong\u003eswimmers exiting the pool\u003c\/strong\u003e also remove water from the basin. Conversely, \u003cstrong\u003erain\u003c\/strong\u003e raises the level, and \u003cstrong\u003ebackwashes\u003c\/strong\u003e (filter backwashing) remove water from the circuit.\u003c\/p\u003e\n\n\u003cp\u003eA too low water level causes \u003cstrong\u003eair intake at the skimmer\u003c\/strong\u003e, which causes the filtration pump to cavitate and can damage it. A too high level reduces the efficiency of surface skimming, as water no longer enters the skimmer correctly. The RNS-2 regulator with a sensor solves this problem by \u003cstrong\u003eautomatically maintaining the optimal level\u003c\/strong\u003e: as soon as the water drops below the sensor, the solenoid valve opens and fills the pool until the water reaches the sensor again. The system then stops automatically, preventing any overflow.\u003c\/p\u003e\n\n\u003ch2\u003eSensor installation: skimmer or balance tank?\u003c\/h2\u003e\n\n\u003cp\u003eThe level sensor can be installed in \u003cstrong\u003etwo main locations\u003c\/strong\u003e depending on the pool configuration:\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation in the skimmer (classic pools)\u003c\/strong\u003e: This is the most common configuration for pools with skimmers. The mounting rail is fixed inside the skimmer, at the desired height for the water level (generally halfway up the skimmer opening, about 10 to 15 cm below the edge of the pool). The 10-meter cable passes through the skimmer's technical duct or a dedicated passage to the technical room where the RNS-2 box is located.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation in the balance tank (infinity pools)\u003c\/strong\u003e: For infinity pools, the sensor is placed in the balance tank, which collects overflowing water before it is returned to the pool. The RNS-2 regulator then maintains a constant balance tank level, ensuring optimal operation of the overflow cascade. The 10-meter cable connects the sensor in the tank to the RNS-2 box located in the technical room.\u003c\/p\u003e\n\n\u003cp\u003eDuring installation, it is important to position the sensor away from \u003cstrong\u003eeddies and turbulence\u003c\/strong\u003e, in an area where the water is relatively calm. Avoid placing it directly in front of the return water inlet or in the skimmer outlet flow, as waves could trigger untimely opening\/closing of the solenoid valve.\u003c\/p\u003e\n\n\u003ch2\u003e10-meter cable: sufficient distance between sensor and RNS-2 box\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e10-meter\u003c\/strong\u003e electrical cable supplied with the sensor covers the typical distance between the skimmer (or balance tank) and the technical room in most residential installations. For large pools or installations where the technical room is very far away, the cable can be extended with a \u003cstrong\u003ewaterproof electrical cable of the same cross-section\u003c\/strong\u003e (generally 2 × 0.75 mm²). Extensions must be made with IP68 waterproof connectors or waterproof junction boxes, and the cable must be mechanically protected in a buried TPC or PVC conduit.\u003c\/p\u003e\n\n\u003cp\u003eThe cable is \u003cstrong\u003epre-installed and soldered\u003c\/strong\u003e to the sensor, ensuring perfect sealing at the connection point. Therefore, it is not necessary to make a waterproof connection on the sensor side; only the connection to the RNS-2 box needs to be made (connection via screw terminal block in the box).\u003c\/p\u003e\n\n\u003ch2\u003eStainless steel material: maximum resistance to chlorine, bromine, and salt\u003c\/h2\u003e\n\n\u003cp\u003eThe sensor is made of \u003cstrong\u003estainless steel\u003c\/strong\u003e (likely 316L or 304 stainless steel), the reference material for equipment in permanent contact with pool water. Stainless steel perfectly resists \u003cstrong\u003echlorine\u003c\/strong\u003e, \u003cstrong\u003ebromine\u003c\/strong\u003e, \u003cstrong\u003esalt\u003c\/strong\u003e (salt electrolysis), \u003cstrong\u003eUV\u003c\/strong\u003e, and \u003cstrong\u003etemperature variations\u003c\/strong\u003e (from 0 to 40 °C in an outdoor pool). It does not corrode, rust, and retains its mechanical and electrical properties for decades.\u003c\/p\u003e\n\n\u003cp\u003eThe choice of stainless steel is particularly important for saltwater pools with electrolyzers, where plastic or ordinary ferrous metal sensors would corrode quickly. 316L stainless steel, if used, contains molybdenum, which further enhances corrosion resistance in saline environments. CCEI stainless steel sensors are designed to last as long as the pool itself, without requiring preventive replacement.\u003c\/p\u003e\n\n\u003ch2\u003eExclusive compatibility with the CCEI RNS-2 box\u003c\/h2\u003e\n\n\u003cp\u003eThis sensor is specifically designed for the \u003cstrong\u003eCCEI RNS-2 level control box\u003c\/strong\u003e. It cannot be used with other brands or models of level regulators, as the detection protocol and electrical characteristics (voltage, resistance, capacitance) are specific to the RNS-2. Likewise, sensors from other manufacturers are generally not compatible with the RNS-2, unless they meet the exact same electrical specifications.\u003c\/p\u003e\n\n\u003cp\u003eThe RNS-2 box is an autonomous electronic regulator that controls a 230V solenoid valve for automatic pool filling. It has settings for the maximum filling time (overflow safety in case of sensor failure), and it can be connected to a centralized pool management system. The RNS-2 box and the sensor form a complete system for automating the water level.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to replace the level sensor? Signs of failure\u003c\/h2\u003e\n\n\u003cp\u003eCCEI stainless steel level sensors are extremely reliable and have a lifespan of \u003cstrong\u003e10 to 15 years or more\u003c\/strong\u003e in normal use. However, several signs may indicate that a sensor is failing and needs to be replaced:\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eContinuous filling or no filling\u003c\/strong\u003e: If the solenoid valve remains continuously open (overflow) or never opens (too low level), first check the cable and connections to the RNS-2 box. If the wiring is correct, the sensor is probably short-circuited (continuous filling) or open-circuited (no filling).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eErratic or intermittent detections\u003c\/strong\u003e: If the regulator repeatedly and quickly opens and closes the solenoid valve, this may indicate a dirty sensor (limescale or biofilm deposit) or oxidation of internal electrical contacts. Clean the sensor with white vinegar or diluted hydrochloric acid. If the problem persists, replace the sensor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNo reaction to level change\u003c\/strong\u003e: If you manually empty the pool and the regulator does not command filling even though the water is well below the sensor, check the electrical continuity of the cable with a multimeter. A cut cable or an oxidized connector prevents the signal from reaching the box.\u003c\/p\u003e\n\n\u003cp\u003eBefore replacing the sensor, always test the complete system: check that the RNS-2 box is powered, that the solenoid valve is working (test it in manual mode if the box allows it), and that the electrical connections are clean and tight. In many cases, a simple cleaning of the sensor or tightening of connections is enough to restore operation.\u003c\/p\u003e\n\n\u003ch2\u003eMinimal maintenance: annual sensor cleaning\u003c\/h2\u003e\n\n\u003cp\u003eThe level sensor requires virtually no maintenance. \u003cstrong\u003eAnnual cleaning\u003c\/strong\u003e is recommended, preferably at the beginning of the season, to remove limescale, algae, or biofilm deposits that could disrupt detection. Remove the sensor from its mounting rail, rub it with a soft sponge and white vinegar (to dissolve limescale), rinse with clean water, then reposition it in the skimmer or balance tank. Take advantage of this cleaning to check the condition of the cable and connections to the RNS-2 box.\u003c\/p\u003e\n\n\u003cp\u003eIf your water is very hard (TH \u003e 25 °F), semi-annual descaling may be necessary. In saltwater pools with an electrolyzer, also check that limescale deposits do not form on the sensor due to too intense chlorine production or too high pH (which promotes the precipitation of calcium carbonate).\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":52139680596305,"sku":"SF140005","price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/7e74f7ed7e6169631f0e805d3910c943.png?v=1779482116"},{"product_id":"niva-vp-regulateur-de-niveau-connecte-et-innovant-ccei","title":"Niva VP: connected and innovative level controller - CCEI","description":"\u003cp\u003eEnsure perfect overflow and complete peace of mind with Niva VP, the new generation regulator by CCEI. No more imprecise floats; welcome to differential pressure measurement with centimeter accuracy.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eNiva VP\u003c\/b\u003e is an innovative water level regulation device, specially designed for \u003cb\u003einfinity pools with a surge tank\u003c\/b\u003e. Unlike traditional probe or float systems, the Niva VP uses \u003cb\u003edifferential pressure measurement technology\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThanks to two sensors (one measuring pressure at the bottom of the tank and the other atmospheric pressure), it determines the water level with \u003cb\u003esurgical precision to the nearest centimeter\u003c\/b\u003e. Fully connected to the \u003cb\u003eVigipool\u003c\/b\u003e ecosystem, it allows smart and secure control directly from your smartphone.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eNiva VP's Strengths\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUnrivaled Precision:\u003c\/b\u003e Centimeter-accurate regulation for an always-perfect water mirror.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFloat-Free Technology:\u003c\/b\u003e Eliminates the risk of blockages and inaccuracies of old systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSmart Leak Detection:\u003c\/b\u003e Continuously monitors your installation and alerts you via the app in case of an anomaly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSimplified Installation:\u003c\/b\u003e Wireless connection (proprietary link) with the \u003cb\u003eTild VP\u003c\/b\u003e filtration box, avoiding complex wiring between the technical room and the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVigipool Ecosystem:\u003c\/b\u003e Remote control via Bluetooth® or Wi-Fi (via the iOS\/Android app) for real-time access to your technical room.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eIntelligent Management of 4 Levels\u003c\/h2\u003e\n\u003cp\u003eThe Niva VP optimizes your pool's operation by automatically managing 4 critical levels in your surge tank:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVery Low Level (lack of water):\u003c\/b\u003e Filtration pump shutdown (pump lockout) to prevent dry running and opening of the fill solenoid valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow Level:\u003c\/b\u003e Resumption of normal filtration while continuing to fill until the optimal level is reached.\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCorrect Level:\u003c\/b\u003e Ideal water level, filling stops.\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverflow Level:\u003c\/b\u003e Activation of forced filtration to return water to the pool. In case of heavy, persistent rain, it can control a drainage solenoid valve (optional).\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/Vigipool_-_connexion_NIVA_VP_Poolplanet.png?v=1774365273\" alt=\"\" width=\"495\" height=\"248\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eInstallation Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEssential Prerequisite:\u003c\/b\u003e The Niva VP must be associated with a \u003cb\u003eTild VP\u003c\/b\u003e box to manage pump lockout and forced operation functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocation:\u003c\/b\u003e Wall mounting, protected from UV rays and direct water splashes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSensor:\u003c\/b\u003e The sensor should be positioned as close as possible to the bottom of the surge tank, ideally in a perforated 50mm PVC tube to protect it from turbulence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e The atmospheric pressure port (at the sensor connector) must not be made watertight to ensure measurement accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eHow does the Niva VP level regulator work?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNiva VP level regulator\u003c\/strong\u003e works using \u003cstrong\u003edifferential pressure measurement technology\u003c\/strong\u003e, which continuously analyzes the water level in the surge tank.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional float systems, it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eprecisely measures water height\u003c\/li\u003e\n\u003cli\u003edetects \u003cstrong\u003ewater level fluctuations\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eautomatically triggers necessary actions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe system intelligently manages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003efilling\u003c\/strong\u003e in case of insufficient water\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003elevel stabilization\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003edraining in case of overflow\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eResult: \u003cstrong\u003eautomatic, reliable, and ultra-precise water level regulation\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1790\" height=\"1007\" src=\"https:\/\/www.youtube.com\/embed\/6McQE-0XkbU\" title=\"Niva Vp - smart level controller for infinity pools\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eWhat are the advantages of Niva VP?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eNiva VP\u003c\/strong\u003e offers a new generation regulation solution:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-accurate precision\u003c\/li\u003e\n\u003cli\u003eFloat-free technology (more reliable)\u003c\/li\u003e\n\u003cli\u003eConnected solution via app\u003c\/li\u003e\n\u003cli\u003eOptimal water level management\u003c\/li\u003e\n\u003cli\u003eIntegrated leak detection\u003c\/li\u003e\n\u003cli\u003eProtection against water shortage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt guarantees a \u003cstrong\u003epool that is always perfectly regulated\u003c\/strong\u003e, without manual intervention.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eHow to install the Niva VP?\u003c\/h2\u003e\n\u003cp\u003eThe installation of the Niva VP is simple but must follow certain rules:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain steps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInstallation of the control box in the technical room (wall-mounted)\u003c\/li\u003e\n\u003cli\u003eHydraulic connection (meter + solenoid valve)\u003c\/li\u003e\n\u003cli\u003eInstallation of the pressure sensor in the surge tank\u003c\/li\u003e\n\u003cli\u003eElectrical connection (230V)\u003c\/li\u003e\n\u003cli\u003eConfiguration via the Vigipool application\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e⚠️ Important: the \u003cstrong\u003e\u003ca href=\"https:\/\/www.poolplanet.com\/products\/tild-vp-coffret-electrique-connecte-et-intelligent?_pos=2\u0026amp;_psq=tild\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"Tild VP pool electrical box\" rel=\"noopener\" target=\"_blank\"\u003eTild VP control box\u003c\/a\u003e is mandatory\u003c\/strong\u003e for operation.\u003c\/p\u003e\n\u003cp\u003eThe installation is designed to be \u003cstrong\u003equick, reliable, and without complex wiring\u003c\/strong\u003e thanks to the provided Niva VP manual.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eWhat technologies does the Niva VP use?\u003c\/h2\u003e\n\u003cp\u003eThe Niva VP abandons often imprecise mechanical floats in favor of \u003cstrong\u003edifferential pressure measurement\u003c\/strong\u003e, offering a much more reliable and precise regulation solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision sensor:\u003c\/strong\u003e It uses two pressure measurements (bottom of the surge tank and atmospheric pressure) to determine the water level to the nearest centimeter. This technology guarantees a \u003cstrong\u003estable, continuous, and turbulence-insensitive measurement\u003c\/strong\u003e, with no risk of blockage or mechanical wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNative connectivity:\u003c\/strong\u003e The device includes Bluetooth® and Wi-Fi transmitters for control via smartphone. You can configure, monitor, and control your installation \u003cstrong\u003elocally or remotely\u003c\/strong\u003e, with real-time information feedback.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVigipool ecosystem:\u003c\/strong\u003e It communicates wirelessly with other devices in the range for centralized management of the technical room. You centralize all your equipment (filtration, lighting, treatment, etc.) in a single interface for \u003cstrong\u003eglobal and intelligent pool management\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntelligent automated regulation:\u003c\/strong\u003e The Niva VP continuously analyzes the water level and automatically triggers the necessary actions (filling, stopping or restarting filtration, overflow management). It ensures \u003cstrong\u003eoptimal water level management without manual intervention\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSecurity and anomaly detection:\u003c\/strong\u003e Thanks to the connected water meter and embedded algorithms, the system detects leaks or abnormal consumption and sends alerts. A technology designed to \u003cstrong\u003eprotect your installation and prevent water loss\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eWhat types of pools are compatible with Niva VP?\u003c\/h2\u003e\n\u003cp\u003eThe Niva VP is specifically optimized for \u003cb\u003einfinity pools\u003c\/b\u003e and \u003cb\u003emirror pools\u003c\/b\u003e equipped with a \u003cb\u003esurge tank\u003c\/b\u003e. It can manage surge tanks up to \u003cb\u003e2 meters in height\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eHow does the Niva VP ensure pool safety?\u003c\/h2\u003e\n\u003cp\u003eThe device actively protects your installation through its intelligent functions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePump protection\u003c\/b\u003e: At \"Very Low\" level, it activates a \"pump lockout\" to prevent filtration from running dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRain management\u003c\/b\u003e: In case of overflow (heavy rain), it activates forced operation to drain the water and can open the drain if necessary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRemote alerts\u003c\/b\u003e: Any anomaly (disconnected sensor, leak, prolonged lack of water) generates an immediate notification on the Vigipool app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ch2\u003eWhy choose the Vigipool universe?\u003c\/h2\u003e\n\u003cp\u003eBy choosing Niva VP, you enter the \u003cb\u003eVigipool\u003c\/b\u003e ecosystem. Centralize all your equipment (filtration, LED lighting, pH\/ORP treatment) on a single app. Your devices communicate wirelessly, creating a scalable and intelligent solution for an effortlessly connected pool.\u003c\/p\u003e","brand":"CCEI","offers":[{"title":"Default Title","offer_id":53374981243217,"sku":"PF10L100","price":1140.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/NivaVPregulationdeniveauinnovanteetconnecteePoolplanet.png?v=1774366749"},{"product_id":"vigiline-regulateur-de-niveau-connecte-pour-piscine-a-skimmer-ccei","title":"VigiLine - Régulateur de niveau connecté pour piscine à skimmer CCEI","description":"\u003cp\u003eOptimisez l’entretien de votre piscine avec le Vigiline, le régulateur de niveau automatique nouvelle génération. Alliant précision sans fil et connectivité Wi-Fi\/Bluetooth, il assure un niveau d’eau constant sans aucune intervention manuelle.\u003c\/p\u003e\n\u003cp\u003eLe \u003cb\u003eVigiline\u003c\/b\u003e est un dispositif intelligent conçu pour automatiser la gestion du niveau d’eau des piscines à skimmers. Grâce à son capteur autonome sans fil et sa technologie de communication longue portée (\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eLoRa® et au Skimni)\u003c\/span\u003e, il surveille en temps réel l'état de votre bassin et agit sur le remplissage ou la vidange pour un confort de baignade optimal.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eLes points forts du VigiLine\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnologie sans fil avancée\u003c\/strong\u003e : équipé d'un transmetteur \u003cstrong\u003eLoRa\u003c\/strong\u003e de longue portée, le \u003cstrong\u003ecapteur de niveau\u003c\/strong\u003e est totalement autonome et communique sans fil avec le coffret de commande.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContrôle à distance via Smartphone\u003c\/strong\u003e : intégré à l'univers \u003cstrong\u003eVigipool\u003c\/strong\u003e, le \u003cstrong\u003eVigiLine\u003c\/strong\u003e se pilote via une application intuitive (iOS et Android) en Bluetooth® ou Wi-Fi. Suivez votre consommation d'eau et recevez des notifications directement sur votre téléphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesure de précision en 3 niveaux\u003c\/strong\u003e : le capteur détecte avec précision le manque d'eau (remplissage), le niveau correct et le trop-plein (vidange).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection et sécurité\u003c\/strong\u003e : inclut une fonction \"\u003cstrong\u003eInterdit Pompe\u003c\/strong\u003e\" pour empêcher votre \u003cstrong\u003epompe de filtration\u003c\/strong\u003e de tourner à vide en cas de niveau trop bas, protégeant ainsi vos équipements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGestion éco-responsable\u003c\/strong\u003e : le \u003cstrong\u003ecompteur d'eau\u003c\/strong\u003e à impulsion intégré permet de suivre votre consommation et de détecter rapidement d'éventuelles fuites dans le \u003cstrong\u003elocal technique\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePourquoi choisir le Vigiline ?\u003c\/h2\u003e\n\u003cp\u003eLe VigiLine n'est pas qu'un simple régulateur, c'est un véritable assistant personnel pour votre piscine. Il vous libère des contraintes de surveillance manuelle, prévient les débordements dus aux intempéries et garantit la longévité de votre système de filtration.\u003c\/p\u003e\n\u003ch3\u003eConseils d'utilisation (mode d'emploi rapide)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation :\u003c\/strong\u003e fixez le coffret à l'abri des UV et des projections. Collez le support du capteur dans le couloir du skimmer en respectant le sens des flèches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMise en service :\u003c\/strong\u003e chargez complètement le capteur par induction avant la première utilisation. Appairez l'appareil via l'application \u003cstrong\u003eVigipool\u003c\/strong\u003e en suivant les instructions à l'écran.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHivernage :\u003c\/strong\u003e activez le \"Mode Hivernage\" sur l'application et stockez votre capteur au sec sur son chargeur pour préserver la batterie.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eComment fonctionne le régulateur de niveau VigiLine ?\u003c\/h2\u003e\n\u003cp\u003eLe fonctionnement du VigiLine repose sur l'automatisation totale : un \u003cstrong\u003ecapteur intelligent\u003c\/strong\u003e (sonde) placé dans le skimmer mesure le niveau d'eau toutes les 60 minutes (en mode veille) ou 3 minutes (en action). Ce \u003cstrong\u003erégulateur de niveau\u003c\/strong\u003e est \u003cstrong\u003efacile à installer\u003c\/strong\u003e et communique sans fil pour déclencher le remplissage si nécessaire.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eQuels sont les avantages de VigiLine pour piscine ?\u003c\/h2\u003e\n\u003cp\u003eLes avantages du VigiLine pour votre piscine incluent une \u003cb\u003erégulation de niveau\u003c\/b\u003e d'une grande fiabilité. Cette solution innovante permet une \u003cb\u003egestion optimale\u003c\/b\u003e grâce au \u003cb\u003eremplissage automatique\u003c\/b\u003e, offrant une \u003cb\u003eprécision au centimètre\u003c\/b\u003e grâce à ses trois points de détection pour éviter tout gaspillage ou débordement.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eComment installer le régulateur de niveau CCEI ?\u003c\/h2\u003e\n\u003cp\u003eVous pouvez \u003cb\u003einstaller\u003c\/b\u003e ce régulateur de niveau CCEI facilement et \u003cb\u003esans travaux complexes\u003c\/b\u003e. Le coffret se fixe au mur dans le \u003cb\u003elocal technique\u003c\/b\u003e et se raccorde à une \u003cb\u003eélectrovanne\u003c\/b\u003e de remplissage (incluse dans l'équipement complet). Le capteur, quant à lui, est simplement collé dans le skimmer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eQuelle est la technologie utilisée par VigiLine ?\u003c\/h2\u003e\n\u003cp\u003eLe VigiLine utilise une \u003cb\u003etechnologie sans fil\u003c\/b\u003e \u003cstrong\u003eLoRa\u003c\/strong\u003e (basse consommation et longue portée) pour son \u003cb\u003ecapteur détection\u003c\/b\u003e. Il s'intègre dans un \u003cb\u003esystème connecté\u003c\/b\u003e global (Vigipool) permettant une \u003cb\u003eautomatisation\u003c\/b\u003e pilotable par Bluetooth® ou Wi-Fi.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eComment maintenir le niveau d'eau avec VigiLine ?\u003c\/h2\u003e\n\u003cp\u003ePour\u003cstrong\u003e \u003c\/strong\u003emaintenir le niveau d'eau avec VigiLine automatiquement, l'appareil effectue une \u003cb\u003edétection de défaut\u003c\/b\u003e (manque d'eau ou trop-plein) et active le \u003cb\u003eremplissage\u003c\/b\u003e. Cette \u003cb\u003egestion optimale\u003c\/b\u003e via le \u003cb\u003eskimmer\u003c\/b\u003e assure que la filtration ne tourne jamais à sec.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eQuels produits sont compatibles avec VigiLine ?\u003c\/h2\u003e\n\u003cp\u003eDe nombreux \u003cb\u003eproduits compatibles\u003c\/b\u003e existent : le \u003cb\u003eVigiLine\u003c\/b\u003e s'intègre parfaitement à tout \u003cb\u003eéquipement\u003c\/b\u003e de l'univers Vigipool pour \u003cb\u003episcine\u003c\/b\u003e (coffret de filtration Tild VP, etc.). Il peut aussi protéger n'importe quelle \u003cb\u003epompe de filtration\u003c\/b\u003e via son contact \"interdit pompe\" et accepte des \u003cb\u003eaccessoires\u003c\/b\u003e comme une vanne de vidange optionnelle.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003e \u003c\/p\u003e\n\u003csection class=\"conclusion\"\u003e\n\u003cp\u003eLe \u003cstrong\u003eVigiLine\u003c\/strong\u003e, porté par l'innovation du capteur \u003cstrong\u003eSkimni\u003c\/strong\u003e et la fiabilité du protocole \u003cstrong\u003eLoRa®\u003c\/strong\u003e, est bien plus qu'un simple régulateur de niveau. C'est un véritable assistant intelligent qui veille sur votre piscine 24h\/24.\u003c\/p\u003e\n\u003cp\u003eEn automatisant la gestion de l'eau, il vous libère des contraintes de surveillance manuelle tout en protégeant activement votre pompe de filtration contre la marche à vide. Que vous soyez chez vous ou à l'autre bout du monde, vous gardez un œil sur votre consommation et la santé de votre installation via l'écosystème \u003cstrong\u003eVigipool\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoisir VigiLine, c’est opter pour une piscine connectée, éco-responsable et durable, où le plaisir de la baignade ne laisse plus de place à l'imprévu.\u003c\/strong\u003e\u003c\/p\u003e\u003c\/section\u003e","brand":"CCEI","offers":[{"title":"Anthracite","offer_id":53864219410769,"sku":"PF10L110","price":1050.0,"currency_code":"EUR","in_stock":true},{"title":"Blanc","offer_id":53864219443537,"sku":"PF10J111","price":1050.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/files\/VigiLine-Regulateurdeniveau.png?v=1778838391"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/5880\/9425\/collections\/r_C3_A9gulateur_20de_20niveau_20niva_205__91092.png?v=1762957540","url":"https:\/\/www.poolplanet.com\/en\/collections\/coffrets-de-regulation-de-niveau.oembed","provider":"Pool Planet","version":"1.0","type":"link"}